Precise ELA Telescoping Mod by Super-T!

[raqball]

Whats this list? Did i miss something ;/

The list is not needed anymore as David was judging interest in an ELA flat button.

The flat button is on the site for order at $30.. Although it's on the site, you can't order it yet.. He said ordering would probably be Tuesday next week though..

 

[DantesInferno]

16459 getting closer. I'll be picking up the flat bottom if i can get ahold of one. What about that compression ring? Are they necessary?

 

[raqball]

The compression ring will only be necessary if the one you have fails..

I have 5 so if you need one before he gets them back in stock just PM me..

How much for one from me you ask? Well free of course!

 

[DantesInferno]

The compression ring will only be necessary if the one you have fails..

I have 5 so if you need one before he gets them back in stock just PM me..

How much for one from me you ask? Well free of course!

Thanks. Be a few weeks out before it gets here. Appreciate it.

Popped in and ordered the ELA and strata but haven't been following too closely. How big of an issue have these compression rings been? I'm assuming these are the rings that lock the telescoping portion in place?

 

[raqball]

Thanks. Be a few weeks out before it gets here. Appreciate it.

Popped in and ordered the ELA and strata but haven't been following too closely. How big of an issue have these compression rings been? I'm assuming these are the rings that lock the telescoping portion in place?

Yup

I don't think they've been an issue at all.. I think it's more of a spare parts kinda thing..

 

[icucme2]

Thanks for ur responses.. I want i want.. I'll be on the look out next week..

 

[DantesInferno]

Yup

I don't think they've been an issue at all.. I think it's more of a spare parts kinda thing..

Sweet. Won't worry about it then. Thanks raq. Much appreciated.

 

[raqball]

No problemo... If you need one, holllllla

 

[icucme2]

My KFL Nano kits arrived.. I will plop some photos up with it on the ELA in all 3 (full metal, 1/3 clear tank, and full clear tank) modes later..

Very nice!! I have the nano clear tank. Love it. I want to order the ss nano sleeves but in ur setup do u have the short chimney also? Theres a site the sells ss nano sleeves but i emailed them about the chimney and they said u use the same stock chimney. I guess the chimney just goes right thru ur drip tip. Is this how urs is?

 

[raqball]

I got the 'official' nano kits from Modfactory and their kits come with the short chimney but they were like $45 each with international shipping (I think I paid $90 for both of my kits with shipping)

The other places that sell nano type kits don't have the short chimney and yes with those kits you use the stock chimney..

I don't know of anyone who sells a short chimney only but you might try contacting Modfactory and see what they say.. International shipping is a killer though!

I believe they took their website down recently and now only sell via Facebook (yuck!)

 

[icucme2]

I checked super t site, thought id see a picof tue flat bottom button.. But no. Any pic of it yet?? A buddy sent me this pic of one on FB, is this a "leaked" pic of it?

 

[icucme2]

Raqball - yes i was almost gonna pull the trigger for the mod factory ones, except the shipping changed my mind.. Rampage vapor sells just the nano ss sleeves. I might do that and hope my drip tip will allow the chimney in there thanks

 

[DantesInferno]

If there's anyone in this thread interested.... I'm guessing most folks in this thread are pretty familiar with wrapping coils. I've came up with a jig that's made it easy for just about anyone to wrap micro coils. Have sent off 20 or so focusing on people that were having trouble wrapping them, especially to those that said they couldn't because of weak hands, arthritis, etc... I'm a RN so i kinda wanted to cater to those type of folks. Anyway feedback has been great. Got people wrapping micros for drippers and protank heads that thought it'd never be possible. The jig will work for anyone but if you're decent at wrapping a coil already it probably isn't going to add any miracles. Can post pics and have a quick vid on how it works of anyone is interested.

 

[raqball]

Raqball - yes i was almost gonna pull the trigger for the mod factory ones, except the shipping changed my mind.. Rampage vapor sells just the nano ss sleeves. I might do that and hope my drip tip will allow the chimney in there thanks

Give me a week or so and I might hook you up with one of my short chimneys..

I only have one KFL and I really only bought 2 kits because I figured that if I was going to pay that much for shipping, I might as well fill the box a little more.. LOL

My Taifun GT comes tomorrow and my XS tank kit for it should be here in a week or so (again from overseas).. After I pimp the Taifun GT in XS mode and if I like it, you may call dibs on one of my nano short chimneys..

I'll PM you in a week or so once I decide..

 

[icucme2]

Dantesinferno - id live too see it

 

[raqball]

I checked super t site, thought id see a picof tue flat bottom button.. But no. Any pic of it yet?? A buddy sent me this pic of one on FB, is this a "leaked" pic of it?

No that is the Satburn flat button for the ELA.. I have 2 of them that should be here tomorrow --> I hope..

 

[icucme2]

Raqball - wow cool.. Im sure we can work something out

 

[INFRNL]

Raqball - yes i was almost gonna pull the trigger for the mod factory ones, except the shipping changed my mind.. Rampage vapor sells just the nano ss sleeves. I might do that and hope my drip tip will allow the chimney in there thanks

I have 2 of the mod factory and 2 of the rampage kits coming. I only have 1 KFL+, not sure if they work on the russian 91% (have one of those coming as well. I could probably hook you up with one of these kits as soon as they arrive.

Also you can trim the factory chimney down as they can be replaced fairly easily. This would allow you to just use the rampage version. Although raq said he could probably hook you up on the chimney.

If there's anyone in this thread interested.... I'm guessing most folks in this thread are pretty familiar with wrapping coils. I've came up with a jig that's made it easy for just about anyone to wrap micro coils. Have sent off 20 or so focusing on people that were having trouble wrapping them, especially to those that said they couldn't because of weak hands, arthritis, etc... I'm a RN so i kinda wanted to cater to those type of folks. Anyway feedback has been great. Got people wrapping micros for drippers and protank heads that thought it'd never be possible. The jig will work for anyone but if you're decent at wrapping a coil already it probably isn't going to add any miracles. Can post pics and have a quick vid on how it works of anyone is interested.

I think I have seen this.

 

[raqball]

not sure if they work on the russian 91%

Yes the nano kits will work in the Russian..

 

[icucme2]

No that is the Satburn flat button for the ELA.. I have 2 of them that should be here tomorrow --> I hope..

Oooohhhhh.. Wow when i saw the pic i thought this is awesome.. It looks clean.. So is the super t ela flat bottom button gonna be similar to this? As in the whole button will be tclose to the diameter of the ELA? Or is the buttons diameter the same as the stock one?