Precise ELA Telescoping Mod by Super-T!

[forcedfuel50]

David, regarding the rings, I'm guessing the top ring is used in 18500 mode? If so, would that mean no top ring(s) in 18650 mode? I think there's a pic showing 18650 mode with no rings. Just doing some guessing . . . .

Two rings are used and included with your purchase (and they can be purchased sperately too if you want the other material as they come in brass or stainless) The bottom slotted and threaded ring screws on the bottom and the top ring goes just behind the cap and is used in both 18500 and 18650 mode (and anything in between) I may make an even longer for 18650 mode at some time just as an optional dress up item to cover even more of the extension tube.

 

[Riverboat]

I may make an even longer for 18650 mode at some time just as an optional dress up item to cover even more of the extension tube.
-----------------------------------------------------------------------------That would dress it up nicely....



David few questions for you...
1. How does the Kick insert? Does it rub against threads (like a P+) or is it a smooth wall insertion?
2. When the Kick is inserted does it stay in when removing the battery? Or does it have to be removed like a P+?
3. If I order a Satin ELA the extention tube piece what is its finsh? Would it be the same as the main body tubes finish?

Thanks...

 

[forcedfuel50]

I may make an even longer for 18650 mode at some time just as an optional dress up item to cover even more of the extension tube.
-----------------------------------------------------------------------------That would dress it up nicely....



David few questions for you...
1. How does the Kick insert? Does it rub against threads (like a P+) or is it a smooth wall insertion?
2. When the Kick is inserted does it stay in when removing the battery? Or does it have to be removed like a P+?
3. If I order a Satin ELA the extention tube piece what is its finsh? Would it be the same as the main body tubes finish?

Thanks...

1 & 2 The Top cap on the extension tube does remove, (i just removed the whole tube and top cap as one piece in the video, but the top cap does remove without unlocking and removing the extension tube its attached to). However, since you can change the batteries by removing the whole tube and cap as one, you can insert the Kick once and not have to remove it to change batteries. It is the same tightness as the PrecisePlus tubes.

3. Yes.

 

[kscoggins]

I think I've just found my new mod! Been wanting a p+ for a while, but didn't know what size I wanted... You just fixed that problem for me

EDIT: Couldn't wait. I've pre-ordered. Gonna go sell some stuff on the classies now to pay for it

 

[Mindtroverted]

Still waiting for the refund to be registered. Last time it took three days so that should be tomorrow. Hope it won't be sold out by then. Are the decorative rings polished regardless of the finish we choose for ELA, or are they in the same finish as the mod?

 

[vaptamist]

I got the impression that these wont "sell out", since they will be produced in house.

 

[Riverboat]

1 & 2 The Top cap on the extension tube does remove, (i just removed the whole tube and top cap as one piece in the video, but the top cap does remove without unlocking and removing the extension tube its attached to). However, since you can change the batteries by removing the whole tube and cap as one, you can insert the Kick once and not have to remove it to change batteries. It is the same tightness as the PrecisePlus tubes.

3. Yes.

Thanks David.... You have answered all my concers, looks like the ELA ia a winner....

 

[forcedfuel50]

Still waiting for the refund to be registered. Last time it took three days so that should be tomorrow. Hope it won't be sold out by then. Are the decorative rings polished regardless of the finish we choose for ELA, or are they in the same finish as the mod?

No worries, we'll make enough

 

[Jeepster08]

Just placed my order for an ELA! I no longer have a desire to get a GGTS. I'm sure the wait will be torture but worth it.

 

[anavidfan]

Hello forcedfuel50 , may I ask what the diameter of the top is? I will be placing an Odysseus on top and notice that the Precise + 18650 was thinner and it didnt have a nice seamless look.Thanks, Ive been looking for a tele mod for a while and this is just beautiful. Is the one on your avatar the satin finish or the polished?

I like the way this looks, 2 tone?

 

[makko327]

I just ordered one. David you are awesome bro!!!!

 

[forcedfuel50]

Still waiting for the refund to be registered. Last time it took three days so that should be tomorrow. Hope it won't be sold out by then. Are the decorative rings polished regardless of the finish we choose for ELA, or are they in the same finish as the mod?

They do come polished yes to a 600 grit finish, but if you want them satin, just make a note in the comments section of your order and we'll take care of you.

 

[Riverboat]

They do come polished yes to a 600 grit finish, but if you want them satin, just make a note in the comments section of your order and we'll take care of you.

So when I put my order together..

Precise ELA Telescoping Mod. Choose Finish Type and Accent Ring Metal Type Below.... : Satin including Satin accent ring...

Precise ELA Extended Tube. Allows use of Kick and 18650 battery.... : Satin finished

Precise ELA Additional Accent Rings... : Brass, I guess that should be polished, or does the brass accent ring look good in a satin finished?

Is this the correct format I would use? I want it all Satin except the extra brass ring..

 

[forcedfuel50]

So when I put my order together..

Precise ELA Telescoping Mod. Choose Finish Type and Accent Ring Metal Type Below.... : Satin including Satin accent ring...

Precise ELA Extended Tube. Allows use of Kick and 18650 battery.... : Satin finished

Precise ELA Additional Accent Rings... : Brass, I guess that should be polished, or does the brass accent ring look good in a satin finished?

Is this the correct format I would use? I want it all Satin except the extra brass ring..

Anyone who orders brass accents (either with the unit) or seperately, i will send out polished unless instructed to do otherwise. I think the polished looks the best. Also, i did get in more brass stock, so i'll do up the accent rings in brass this coming week and post some pics. Though mods have had brass for awhile, it's easier to visualize in pictures.

 

[forcedfuel50]

Hello forcedfuel50 , may I ask what the diameter of the top is? I will be placing an Odysseus on top and notice that the Precise + 18650 was thinner and it didnt have a nice seamless look.Thanks, Ive been looking for a tele mod for a while and this is just beautiful. Is the one on your avatar the satin finish or the polished?

I like the way this looks, 2 tone?
View attachment 160589

I media blasted the telescoping section, its hidden on 18350 and 18500 modes but exposed in 18650 mode. All my pictures are of the polished (600grit finish). Dimensions approximately are as follows: At the telescopic section 21mm at the indented section on the bottom half 22 mm at the ends 24mm. Length varies from approximately 72mm to 104mm depending on battery.

 

[forcedfuel50]

I just ordered one. David you are awesome bro!!!!

No, you are awesome bro!

 

[anavidfan]

I media blasted the telescoping section, its hidden on 18350 and 18500 modes but exposed in 18650 mode. All my pictures are of the polished (600grit finish). Dimensions approximately are as follows: At the telescopic section 21mm at the indented section on the bottom half 22 mm at the ends 24mm. Length varies from approximately 72mm to 104mm depending on battery.

Thanks for the measurements. It seems perfect ! I wont be able to get one right away, but seems like these beauties arent going to be something that requires long lists and months of wait time. Thank you , its a new classic.

 

[betterBquietnow]

Anyone who orders brass accents (either with the unit) or seperately, i will send out polished unless instructed to do otherwise. I think the polished looks the best. Also, i did get in more brass stock, so i'll do up the accent rings in brass this coming week and post some pics. Though mods have had brass for awhile, it's easier to visualize in pictures.

Can't wait to see these pics!

 

[Jeepster08]

I ordered mine with the basic satin setup. No doubt I will want to add additional trim rings and such later. I'm curious to see what the "colored" rings will look like. May I suggest "Dallas Cowboys Blue" as an option? The idea of a screw on atty in the future also has my interest as well as an external Kick (Kicklet) type device that replaces the top cap. I have to say that I am more excited about this mod than any other since I started vaping!

 

[forcedfuel50]

I ordered mine with the basic satin setup. No doubt I will want to add additional trim rings and such later. I'm curious to see what the "colored" rings will look like. May I suggest "Dallas Cowboys Blue" as an option? The idea of a screw on atty in the future also has my interest as well as an external Kick (Kicklet) type device that replaces the top cap. I have to say that I am more excited about this mod than any other since I started vaping!

How about a screw on 20W DNA adjustable wattage module too?! Go big or go home...