Printed Mechanical Bottom Feeder Mod

Jump to latest Follow Reply
Status
Not open for further replies.
Sort by date Sort by reaction score
RGLP4Lyfe

RGLP4Lyfe

Ultra Member
ECF Veteran
Verified Member
Oct 29, 2014
1,344
3,846
PA
Pwheeler you may not think you need the body magnets now, but trust me after a few bottle/ battery changes you will want them! It gets loose fast. Not that the print wears down to nothing, it just gets looser fitting eventually... so you definitely should glue those magnets in. Or everytime you pop the atty cap you'll pull the whole inside out. And yes, on both my Pekos I have derringer clones on both. Love the look and hits. Can't wait for my CH authentic!!

-Mark
 
muzichead

muzichead

Resident Knucklehead
ECF Veteran
Verified Member
Feb 7, 2011
5,281
13,882
Illinois
pwheeler said:
I finally got my v1.1 together today! Man, I had a time with it with my big hands and those little itty bitty parts, but I finally made it. I didn't paint it or anything, I just wanted to see how it goes together and see how it works. My internal framework was firm enough I didn't even put the two magnets in there. I used the tall button and the firm spring. Got it all together, used a 9ml Vapage bottle and battery, my Derringer and it hits like a beast! Wow, my Reos have been having problems hitting hard, I think the firing pins might be wearing out, but this thing is amazing! Gotta order my v2.1 prints as soon as I can. I have 2 internal kits reserved for those. Oh, and I had to read and re-read that part about the body magnets, too, so I understand the confusion there.
Click to expand...

Nice going there Paul... You should also keep in mind those parts kits along with a couple other parts will put together a 26650 Peko!!! I am waiting on mine right now...
 
pwheeler

pwheeler

Just Vaping
ECF Veteran
Verified Member
Nov 14, 2013
9,157
31,761
68
Weimar, TX
RGLP4Lyfe said:
Pwheeler you may not think you need the body magnets now, but trust me after a few bottle/ battery changes you will want them! It gets loose fast. Not that the print wears down to nothing, it just gets looser fitting eventually... so you definitely should glue those magnets in. Or everytime you pop the atty cap you'll pull the whole inside out. And yes, on both my Pekos I have derringer clones on both. Love the look and hits. Can't wait for my CH authentic!!

-Mark
Click to expand...
I'll do it, but right now I just wanted it working. I'll also tear it down for paint, too.

Sent by REO vapor
 
rudedog

rudedog

Ultra Member
ECF Veteran
Verified Member
Apr 4, 2014
1,711
5,302
toledo ohio
well dang wish I could post pics,I appreciate all the help ya'll gave me here.few times I was just to tired to be messin with building anything!i haven't put the last magnet in yet but its cool how it goes together by the 2 mags sticking then the drop of glue on the top magnet and slide it together and leave it for ohhh 10minutes just to be sure its dry im guessing.i already orderd my polished white 18650 or I would have done one of the 26650 peko versions.

now I have to wait to find smore parts kits,does anyone know when or where that may happen?when I do get mine completely finished ill have a guy I know who has a camera take pics so I can post them.this thing is awesome though!may change out the brass rod for wire when I get a soldiering iron.i see a gdna in my future!may sell some reos to finance it but hey that's good with me.regulated squonking....ohhhh yeah.thanks agin to alla ya'll for helpin me through this!.....Rick
 
Last edited:
Alexander Mundy

Alexander Mundy

Ribbon Twister
ECF Veteran
Verified Member
Apr 1, 2013
4,408
26,100
Springfield, MO
RGLP4Lyfe said:
Pwheeler you may not think you need the body magnets now, but trust me after a few bottle/ battery changes you will want them! It gets loose fast. Not that the print wears down to nothing, it just gets looser fitting eventually... so you definitely should glue those magnets in. Or everytime you pop the atty cap you'll pull the whole inside out. And yes, on both my Pekos I have derringer clones on both. Love the look and hits. Can't wait for my CH authentic!!

-Mark
Click to expand...

Yep, here is the reason the magnets were designed into the release version: (Beta didn't have them originally)

 
finagle69

finagle69

Ultra Member
ECF Veteran
Verified Member
Feb 11, 2013
1,027
1,311
47
Sacramento, CA
pwheeler said:
Where can these lugs and extra stuff be bought from if I decide to do a 26650 mod? I have 2 kits and intend on doing 2 18650's, but I might be persuaded to do a 26650 and an 18650.
Click to expand...
I can recommend Digikey. They sell in loose quantities and ship first class mail for a few dollars.
 
finagle69

finagle69

Ultra Member
ECF Veteran
Verified Member
Feb 11, 2013
1,027
1,311
47
Sacramento, CA
RGLP4Lyfe said:
Good lookin out finagle! And I still haven't been successful seeing your 26650! :snorts:

-Mark
Click to expand...
43bc769ff5b54c004d4c7f6229aa66c6.jpg


How about now?
 
Status
Not open for further replies.

Similar threads

gdeal
  • Locked
Printed DNA 40 Bottom Feeder Mod
Replies
652
Views
57K
Bottom Feeder Mods
BobC
BobC
gdeal
  • Locked
Printed DNA30 Bottom Feeder
Replies
3K
Views
232K
Bottom Feeder Mods
Vince159
Vince159
scooterstew71
  • Locked
Phantohm Style Bottom Feeder Squonk Mechanical Box Mod
Replies
15
Views
3K
Liquid Feed APV Discussion
crunchie812
crunchie812
GinaVape
  • Locked
VGME BF Squonk Mechanical Box Mod Clone - Silicone bottom feeder bottole
Replies
0
Views
1K
3FVape
GinaVape
GinaVape
GinaVape
  • Locked
Energetic just the way you are,the FrankenSkull Mechanical Box Mod Clone + Bottom Feeder RDA Kit
Replies
2
Views
2K
3FVape
GinaVape
GinaVape

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)
Top Bottom
Jump to latest Follow Reply
Jump to latest Follow Reply
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu