Printed Mechanical Bottom Feeder Mod

[rudedog]

mine had been going on 18-20 days til I emailed them and asked what was up with 3weeks with economy and I hadn't got any word on my print at all,no kidding the thing was in my mail box 2days later....hownthehell did they do that!print was great I just think they it got lost in the shuffle....kinda like pwheeler's maybe.i too wont do the economy route again.

That is still long even for economy. Most of us got them much sooner. I ordered a complete blue polished Peko plus black ring and buttons. Fifteen days from order to receipt via economy.

 

[pwheeler]

mine had been going on 18-20 days til I emailed them and asked what was up with 3weeks with economy and I hadn't got any word on my print at all,no kidding the thing was in my mail box 2days later....hownthehell did they do that!print was great I just think they it got lost in the shuffle....kinda like pwheeler's maybe.i too wont do the economy route again.

I just sent another email. I just got one from them stating that my order may be delayed! That did not sit well with me at all. After this email, they may just cancel me out and refund my money. I'll wait to hear from them again. I did check out the Shapeways site and it doesn't look like too much has been updated, nor are there any 26650s listed there either.

 

[dhaiken]

I just sent another email. I just got one from them stating that my order may be delayed! That did not sit well with me at all. After this email, they may just cancel me out and refund my money. I'll wait to hear from them again. I did check out the Shapeways site and it doesn't look like too much has been updated, nor are there any 26650s listed there either.

I ordered a Polished Grey on 03/25. Received an email @ 2:15AM saying it was printed. Hope it was a bad photo because the color looks washed out.
Just checked the site & the status says Ready to Ship.
It wasn't scheduled to arrive until 04/17.

 

[rudedog]

wow im really surprised and disappointed with that bit of news!i don't know what to say except maybe shapeways will be better for you than sculpteo has.what a bummer man.they couldn't be much worse from the sounds of things.i have a 26650 peko if you are interested(white not polished) in it.its sprayed with the 1311 and put together.hasnt been used cuz I don't have the batts I orderd yet...waiting on 101 and they never take this long til I want something.all id have to do to send it is take the atty off I married to it.or you just want the print im guessing.ive got 72$ in the print and can take the my parts off if you want only the print.let me know.ive got a plenty of bf mods so not a problem to help you out.

I just sent another email. I just got one from them stating that my order may be delayed! That did not sit well with me at all. After this email, they may just cancel me out and refund my money. I'll wait to hear from them again. I did check out the Shapeways site and it doesn't look like too much has been updated, nor are there any 26650s listed there either.

 

[pwheeler]

wow im really surprised and disappointed with that bit of news!i don't know what to say except maybe shapeways will be better for you than sculpteo has.what a bummer man.they couldn't be much worse from the sounds of things.i have a 26650 peko if you are interested(white not polished) in it.its sprayed with the 1311 and put together.hasnt been used cuz I don't have the batts I orderd yet...waiting on 101 and they never take this long til I want something.all id have to do to send it is take the atty off I married to it.or you just want the print im guessing.ive got 72$ in the print and can take the my parts off if you want only the print.let me know.ive got a plenty of bf mods so not a problem to help you out.

Appreciate the offer, but I'll wait and see what happens. I eventually want maybe 3 more 18650s and a 26650. I'll just see if Sculpteo will straighten up first. I might go for a v2.2 from Shapeways next and see how it compares, but when the time comes that I want a 26650, I'll have no choice at this time to stick with Sculpteo.

Sent by REO vapor

 

[pwheeler]

I am updating Shapeways to the most recent models. Should be done by this evening. Didnt think anyone was ordering from there anymore.

I hadn't given it much thought either until now. Thanks!

Sent by REO vapor

 

[rudedog]

ok that's great,i just wanted to make the offer so you could get it sooner rather than later my friend.i was able to fire mine(26650) with the 18650 batt but and am still waiting on the big batts.ive never had to wait this long with 101 b4 so idk whats up with this order.also if anyone needs any 26ga kanthal I have 100' of it and have no use for it now,seein how lightining vapes put a priority order in the mail for me because this roll hadn't shown up after 10days.so props to lightining vapes,they are a righteous place to do vape shopping for sure!goodluck with the rest of your project pwheeler!

Appreciate the offer, but I'll wait and see what happens. I eventually want maybe 3 more 18650s and a 26650. I'll just see if Sculpteo will straighten up first. I might go for a v2.2 from Shapeways next and see how it compares, but when the time comes that I want a 26650, I'll have no choice at this time to stick with Sculpteo.

Sent by REO vapor

 

[RGLP4Lyfe]

Rudedog you are a very caring individual, trying to help someone out by sending them your mod! Props to you my friend.

I'm waiting on my Gdna from Sculpteo, economy ordered. I don't even have the board yet so I'm patiently waiting. And waiting on Mike's co op to take off. Regulated here I come, still mad love for my 4 Pekos though!

-Mark

 

[dhaiken]

I hadn't given it much thought either until now. Thanks!

Sent by REO vapor

Has Sculpteo seen your avatar & know where you live?

Clearly they don't know who they're messing with!

Didn't you order yours on 03/21?

 

[dhaiken]

ok that's great,i just wanted to make the offer so you could get it sooner rather than later my friend.i was able to fire mine(26650) with the 18650 batt but and am still waiting on the big batts.ive never had to wait this long with 101 b4 so idk whats up with this order.also if anyone needs any 26ga kanthal I have 100' of it and have no use for it now,seein how lightining vapes put a priority order in the mail for me because this roll hadn't shown up after 10days.so props to lightining vapes,they are a righteous place to do vape shopping for sure!goodluck with the rest of your project pwheeler!

I just started trying 26ga and I'm liking it in these drippers w/a mech.

I put a dual twisted in a Nuppin' & it rocks. Looks like a car suspension coil.

Had an incident that required its removal. Tweaked it a bit; re-installed it; dry burned & compressed; and it looks like new.

That thing may last forever.

 

[TyCreek]

Rudedog you are a very caring individual, trying to help someone out by sending them your mod! Props to you my friend.

I'm waiting on my Gdna from Sculpteo, economy ordered. I don't even have the board yet so I'm patiently waiting. And waiting on Mike's co op to take off. Regulated here I come, still mad love for my 4 Pekos though!

-Mark

Regulated with TP is the easy button path IMO... Are you sure you want to give up gunky coils and rewicking every couple days?

 

[RGLP4Lyfe]

Regulated with TP is the easy button path IMO... Are you sure you want to give up gunky coils and rewicking every couple days?

Well, i don't get gunky coils often and re wick about every 2 weeks with KGD! (Unflavored) with a hint of fruit loops. Very clean DIY juice [emoji6]

....BUT I am so ready for an awesome, powerful, temp controlling Gdeal mod. Worthy of a king.

Btw- Gdeal, i want to change my user name to -Printed4Lyfe
Because since getting your mods, i have sold all my reos but one. And that one I am trying to sell now!

-Mark

 

[Rossum]

Forum usernames are be kinda like tattoos; best to ponder them real carefully before selecting them.

 

[Distroshack]

A quick question now that I have all the bits. Are people sealing/painting before or after putting it all together? And does everyone seal the inside as well as the outside?

 

[SeanMoore]

A quick question now that I have all the bits. Are people sealing/painting before or after putting it all together? And does everyone seal the inside as well as the outside?

I sealed everything with 1311 before assembly. Inside and out.

 

[Distroshack]

I sealed everything with 1311 before assembly. Inside and out.

The 1311 I ordered from the US hasn't even left yet so I'm going to try polyurethane varnish

 

[pwheeler]

Shapeways has been updated to the latest models... Their site was a little slow last night for some reason.

I tried it this morning and parts of it was down. I did see where you updated.

Sent by REO vapor

 

[dhaiken]

I received my shipping notice today from Sculpteo. Ordered 03/25 w/the 30% discount.

 

[pwheeler]

I received my shipping notice today from Sculpteo. Ordered 03/25 w/the 30% discount.

I placed mine a few days before that and still have no shipping notice.

Sent by REO vapor

 

[Distroshack]

Poly will add thickness to your internal, ring and button. If you do use it, make sure that you have extra clearance if your parts are tight on the dry assembly. You dont have a matt acrylic spray over in the UK?

I'm sure we do. I'll take a look at what's available