Proteus official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
You really need this new item Adam. You can sell your previous GG and buy this one.
You dont know what it is right now but you need it
You really need this new item Adam. You can sell your previous GG and buy this one.
You dont know what it is right now but you need it
Oh boy here we go Now I will be wondering what it is and where i will get the $ maybe i can find a sponsor didn't Samsung make the chip for you. Maybe they will sponsor me lol I would love to sell the old for the new but they have sentimental value as well and i still use them once in a while they are built to last forever! Can not wait imeo i will be guessing every day now. thanks Adam
Anyone have a simple solution to my problem. My wife says she needs Xmas ideas. I told her that I really want the Proteus that I've been waiting for. She says "how do I get you that? I don't know where to go on the web or who to talk to about it". She a busy woman. Travels a lot during the month.
And now that Imeo is about to pull another rabbit out of his magic hat I'm wondering if I should just
wait a bit and ask for a new toaster instead
And now that Imeo is about to pull another rabbit out of his magic hat I'm wondering if I should just
wait a bit and ask for a new toaster instead
Ok, I will ask you about what you want to see on a front button mod and I will tell you if it exists on the new GG.
I have big confidence as always for this new GG and I think that I included more things than what you may think.
What I need from you is to tell me what a front button GG has to have to make you TOTALLY happy. I want you to describe your dream front button mod. Expensive or inexpensive is on your wish list too. Big or small, batteries that can take etc........ I need anything you can think off. But I need things that you really need, not useless ones.
Lets start
I have big confidence as always for this new GG and I think that I included more things than what you may think.
What I need from you is to tell me what a front button GG has to have to make you TOTALLY happy. I want you to describe your dream front button mod. Expensive or inexpensive is on your wish list too. Big or small, batteries that can take etc........ I need anything you can think off. But I need things that you really need, not useless ones.
Lets start
Last edited:
Ok Imeo , here's mine:
SS mat sand blasted with GG wings ( laser engraving ) Titanium would be great as well ( light weight )
Smalest possible mech mod , 18350 and 18500 ( 18500 my favorite )
AFC like Esterigon , auto adjust positive pin as well .
Best conductivity possible .
Solid silver positive and negative contacts.
Front button soft with smooth edges .
Lock- unlock system simple, safe and one forth turn action .
Not thicker then 22mm.
Lightest possible .
Signed : By Imeo ( laser )
SS mat sand blasted with GG wings ( laser engraving ) Titanium would be great as well ( light weight )
Smalest possible mech mod , 18350 and 18500 ( 18500 my favorite )
AFC like Esterigon , auto adjust positive pin as well .
Best conductivity possible .
Solid silver positive and negative contacts.
Front button soft with smooth edges .
Lock- unlock system simple, safe and one forth turn action .
Not thicker then 22mm.
Lightest possible .
Signed : By Imeo ( laser )
Last edited:
Pic simulation example :
Esterigon simulating front button mod with 18350 mod with penelope v3 short
Esterigon simulating front button mod with 18350 mod with penelope v3 short
Ok Imeo , here's mine:
SS mat sand blasted with GG wings ( laser engraving ) Titanium would be great as well ( light weight )
Smalest possible mech mod , 18350 and 18500 ( 18500 my favorite )
AFC like Esterigon , auto adjust positive pin as well .
Best conductivity possible .
Solid silver positive and negative contacts.
Front button soft with smooth edges .
Lock- unlock system simple, safe and one forth turn action .
Not thicker then 22mm.
Lightest possible .
Signed : By Imeo ( laser )
* SS Mat & SS Polished combined, with discrete GG wings. Maybe with a touch of brass / brass accent.
* Smalest possible mech mod for 18350, 18500, 18650 batteries.
* AFC like Esterigon.
* Auto adjustable positive & negative pins.
* Solid silver positive and negative contacts.
* Lock- unlock system simple, safe and one forth turn action.
* Lightest possible.
* 22mm diameter (Personally I don't care much about the diameter (21 mm, 22 mm, 23 mm), but I know the world would be happy with a 22 mm GG mod).
* Signed : "by Golden Greek" (small and discrete).
* Front button soft with smooth edges, and that can be pressed at any place (center, sides).
* Compatible with VIR module (VIR upgradeable).
* Best conductivity possible:
All front button mods I have seen, the circuit is closed (when the button is pressed):
Negative pin contacts with the negative battery pole &
current travels through the spring (or magnets) inside the button and / or the axis of the button, both parts are in contact with the body of the mod, the problem I see is that the good conductivity depends on how well the spring is making contact with the button and at the same time with the body of the mod, and/or the contact between the axis post and the body of the mod.
What if the button could be in constant contact with the body of the mod, so when the button is pressed the current will tavel through the button negative pin and through this permantent contact, instead the spring and / or the button axis?
As an illustration: imagine that the button's negative pin has a wire (silver or copper) that connects it with the body of the mod, that way the good conductivity will not depend of the spring or the button's axis.
* Or a totally new front button system, with a mechanism simillar to Esterigon, in which the button pin acts as a bridge (I do not see how it can be implemented in a front button mod).
Ok what I would like
AFC I don't need this time but air grooves on connector cap for just in case.
Adjustable positive post of course and something to avoid batt rattle
If its a 22 mod and I think it is
It would be great to have those 20x1 threading like most mods of that diameter so we can screw those attys with hybrid connectors.Good contact points and as few as possible...
Switch should get most atention in my opinion and must work every time and easy to use...
Ok this is something I would like to have on a mod but I know you will make it much better and different.
I use mainly 18500 but you should offer all three tubes...
Polish is my first choice but that and engraving I leave to you couse that's just not that important to me
* Or a totally new front button system, with a mechanism simillar to Esterigon, in which the button pin acts as a bridge (I do not see how it can be implemented in a front button mod).[/QUOTE]
Ariel , In simulation pic I posted before , that mount works ! With no current drop I could measure .Off course not usable , because you have tu turn esterigon lock button till it contacts , then turn back to disconnect just did it to see how it looks like as a front button mod . Positive pin I just changed the flat pole that goes to bat. instead of the one rounded . As you mentioned no spring , all solid to body . Wonder if Imeo figures out something like this but really easy to use ...
Ariel , In simulation pic I posted before , that mount works ! With no current drop I could measure .Off course not usable , because you have tu turn esterigon lock button till it contacts , then turn back to disconnect just did it to see how it looks like as a front button mod . Positive pin I just changed the flat pole that goes to bat. instead of the one rounded . As you mentioned no spring , all solid to body . Wonder if Imeo figures out something like this but really easy to use ...
I have been thinking. If i could take parts of all GG and build one hmmm
18350,18500,18650 tubes for sure. Must have a choice on bat size. I prefer 18650.
Air flow Control like Esterigon but more air flow if its to much you can just close it a bit.
Native connection that can use VIR so we get the best connectivity.
A button like Esterigon but do away with the spring magnets are the way to go.
Self adjusting pins why last just common sense.
A RTA like tilemahos but i must admit mine always is leeking down the air hole or those two holes inside and the way i cut the wick it really doesnt draw the juice back up maybe and complete overhaul on this and of course a little ceramic and chimmy shape and size more like iatty. These are just my thoughts for now let me really think and try again.
18350,18500,18650 tubes for sure. Must have a choice on bat size. I prefer 18650.
Air flow Control like Esterigon but more air flow if its to much you can just close it a bit.
Native connection that can use VIR so we get the best connectivity.
A button like Esterigon but do away with the spring magnets are the way to go.
Self adjusting pins why last just common sense.
A RTA like tilemahos but i must admit mine always is leeking down the air hole or those two holes inside and the way i cut the wick it really doesnt draw the juice back up maybe and complete overhaul on this and of course a little ceramic and chimmy shape and size more like iatty. These are just my thoughts for now let me really think and try again.
I want to be shorter than any other GG with all kind of batteries.
I want to put it beside my stealth and be surprised because it'll have 18650 battery and will be only a little taller.
A locking mechanism and an air control are enough for me.
Can you do that?
That's what I want
I want to put it beside my stealth and be surprised because it'll have 18650 battery and will be only a little taller.
A locking mechanism and an air control are enough for me.
Can you do that?
That's what I want
I´ll take two of those
I want to be shorter than any other GG with all kind of batteries.
I want to put it beside my stealth and be surprised because it'll have 18650 battery and will be only a little taller.
A locking mechanism and an air control are enough for me.
Can you do that?
That's what I want
Imeo gave us already some numbers few days ago .. Like ... 76mm total length with 18650 bat . !!!!!!!!!! Just wondering how is the firing button and locking system...
Ok round two i totally agree as small compact as possible. What was thinking while i was infront of the bbq. The RTA like i said above but with a clear or stainless steel tank but here is the difference the juice flow control is controlled by the top cap instead of the mouth piece allowing you to use a kick as gg drip tip with logos of course and a series of small dots on the tank top section letting you know that the juice control 1/4 1/2 3/4 open i hope this is clear enough to understand. Still thinking
- Status
Similar threads
