I haven't seen the Pene V4 Mini in stock anywhere! Must be sold out already, boo
Proteus official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
(quote from thread: Penelope V4 Mini)
Sooooooo, the perfect atomizer for Proteus is P3, right?
BTW, I'm wondering: what about an alternate Proteus cap without AD, for sealed atomizers?
I mean: does it make sense, or it'd be ephemeral, as there'd be no advantage in size?
sounds like right to me too ... if only P3 could be sealed ...
(quote from thread: Penelope V4 Mini)
Sooooooo, the perfect atomizer for Proteus is P3, right?
BTW, I'm wondering: what about an alternate Proteus cap without AD, for sealed atomizers?
I mean: does it make sense, or it'd be ephemeral, as there'd be no advantage in size?
no advantage in size Otello. I made the air control in a way that doesnt spend even 1 mm on total length
if its sealed then we cant control it monk
mmmmh yeah right ... that was a silly remark
I'm just getting addicted to sealed tilemahos ... it's really a big advantage for me !
no advantage in size Otello. I made the air control in a way that doesnt spend even 1 mm on total length
Yes, I suspected it.
So I must go direct to next step: What about a hybrid base for P4?
Yes, I suspected it.
So I must go direct to next step: What about a hybrid base for P4?
If we can't use the Tilemahos hybrid base on Esterigon with VIR, I don't think it's usable an hybrid connection on Proteus with VIR ...
... but I still hope that Imeo changes something ... especially on the Esterigon
Why Frillo?
I don't know what is the problem with Esterigon, but I cant see a reason why a new part including the head of Proteus and the bottom of P4 cannot be made.
You'd even have back the air control...
Imeoooooooo!!! Please, speak!
I don't know what is the problem with Esterigon, but I cant see a reason why a new part including the head of Proteus and the bottom of P4 cannot be made.
You'd even have back the air control...
Imeoooooooo!!! Please, speak!
Yes, I suspected it.
So I must go direct to next step: What about a hybrid base for P4?
maybe impossible Otello. Electronics of Proteus need protection that a hybrid base cant really give
Ah!
I'm curious:
Do you mean mechanical protection when the PV is without atomizer?
Or protection from fluid flood?
Or...?
I'm curious:
Do you mean mechanical protection when the PV is without atomizer?
Or protection from fluid flood?
Or...?
protection from fluid Otello. If liquid goes inside VIR, it will be damaged.
A sealed atomizer may offer a protection but we are not sure if a customer didnt clean the pole of the atomizer before put it on Proteus and we also are not sure how good sealing modders do on their constructions
A sealed atomizer may offer a protection but we are not sure if a customer didnt clean the pole of the atomizer before put it on Proteus and we also are not sure how good sealing modders do on their constructions
I appreciate the advice on the Penelope and where to get it folks. Found it with your help, and placed an order for two.
Why Frillo?
I don't know what is the problem with Esterigon, but I cant see a reason why a new part including the head of Proteus and the bottom of P4 cannot be made.
You'd even have back the air control...
Imeoooooooo!!! Please, speak!
The better way to have the air control is to use a Penelope v3 ... as I would like to do
... but I'm not sure, because tomorrow I will go at Bitfumo store
... oh! poor my wallet 
Last edited:
Will .5mm (24 gauge) Grade 1 Titanium wire work on a Penelope v4 + Proteus combo? Or is .5mm still slightly too thick?
yes, you can use it heat. Penelope and Tilemahos can keep with their bolts a 0,5 wire and Proteus can handle this wire at lower temps because of its smaller battery.
But a 0,5 wire is very very thick. A 0,4 is very thick too, so I cant see a reason for a 0,5 wire
But a 0,5 wire is very very thick. A 0,4 is very thick too, so I cant see a reason for a 0,5 wire
yes, you can use it heat. Penelope and Tilemahos can keep with their bolts a 0,5 wire and Proteus can handle this wire at lower temps because of its smaller battery.
But a 0,5 wire is very very thick. A 0,4 is very thick too, so I cant see a reason for a 0,5 wire
Thanks, Imeo. I was asking because you can find .5mm Grade 1 Titanium wire online pretty easily at very nice prices. It's about $12 (US) for 15 meters.
I see Heat.
I would avoid a so fat wire because we ruin batteries very easy on mechs and electronics too
I would avoid a so fat wire because we ruin batteries very easy on mechs and electronics too
What about .32mm Titanium Grade 1? Would that be about perfect? I've sourced it (in massive quantities, too).
- Status
Similar threads
