Provape Provari is not just Hype it's Unbelievable.!

[kabonk]

wow that was quick I ordered it Sat it shipped Mon and it's at the post office and will be here tomorrow, woohoo can't wait

ok you guys where right this is pretty darn awsome its really well made and a lot smaller then it looks in the pictures I'm glad I listen to you

 

[SCORPIUS]

Got my Black chrome Provari a couple of weeks back. Been using it with the bulli A2 & A2-T and I must say its the best thing I've spent my money on. Perfect vape every single time I hit the button. Amazing features and great quality. I love my ProVari and the A2.

 

[lunchbox0]

wow that was quick I ordered it Sat it shipped Mon and it's at the post office and will be here tomorrow, woohoo can't wait

ok you guys where right this is pretty darn awsome its really well made and a lot smaller then it looks in the pictures I'm glad I listen to you

Welcome to the ProVari world of vaping, doesn't it look huge in pictures? Did you get the 2500mAh batteries?

 

[kabonk]

I didn't because it looked so big but I will be ordering an end cap and a couple 2500mAh batteries. my Reos are jealous I haven't put the provari down since it got here 12 hours ago

 

[Shaitaan]

Grats to all that just ordered or recieved theirs....I've had my provari about 3 or 4 weeks now and not regretting a thing, with all the safety features, consistant vape each draw...the adjustability, checking all your settings, your atty....I'm ready for a 2nd one...

 

[Dalton63841]

Waaaaa! Ordered mine on August 31st, and still hasn't shipped. Why must I love chrome so much?! I knew what I was getting in to ordering that model...

 

[ukeman]

it;s going to last you a lifetime (more or less ... get what you really want... and just hang in there...

Waaaaa! Ordered mine on August 31st, and still hasn't shipped. Why must I love chrome so much?! I knew what I was getting in to ordering that model...

 

[Dalton63841]

it;s going to last you a lifetime (more or less ... get what you really want... and just hang in there...

Haha! Yea I know it will last me a lifetime. In fact, once I have it in hands, I am going to post a thread showing off my bad*** shell case I made for it for when I am out and around. Patterned high strength grade carbon fiber tube, 1" OD, .93 ID, lined with silk velvet. Just gotta get the Provari in hand to measure where to put the cutouts for the button and window.

They mentioned that Chromes will start going out early next week, which is still inside of the 3 week window claimed on their website, so I'm not freaking out too much LOL.

 

[cw007]

Hi Everyone I have had my Provari allmost a month now. had ego ts and other ones before my Provari and when I got this bad boy never picked up anything else since then. Also considering getting another one soon. Does anyone know where to get High Resistance Cartos never drip before?

 

[ukeman]

cartos are not for dripping... but i guess you mean since you don't drip yet.... yes; you can get LR Boge 2.0 cartos (most preferred especially since the Vari is amp limiting -safety feature ; for LR below 1.8 Ohms)...from quite a few places.. i think SmartVapes has them now, and if you get sliver, you can use them in tanks.

 

[ukeman]

Dalton, i do know they want to get it to you asap... if CS is any reflection; i just sent a new Vari in for service, and turnaround was less than a week. !

 

[cw007]

cartos are not for dripping... but i guess you mean since you don't drip yet.... yes; you can get LR Boge 2.0 cartos (most preferred especially since the Vari is amp limiting -safety feature ; for LR below 1.8 Ohms)...from quite a few places.. i think SmartVapes has them now, and if you get sliver, you can use them in tanks.

Ukeman yea I am using a liquinator rite with the boge 3.0 been liking it at 5volts no problem. What voltage can I take the LRs too.
Which do you prefer cartos or attys?
Thanks

 

[Dalton63841]

Dalton, i do know they want to get it to you asap... if CS is any reflection; i just sent a new Vari in for service, and turnaround was less than a week. !

LOL Oh my waiting should be NO reflection of customer service. I should make that clear to other readers. I am still well inside of the stated lead time shown on the website. This will actually be my second Provari, and have never had an issue in function or customer service.

This is just me being antsy LOL! Watching all the other color Provari's ship before mine is kinda like 8-o, but I knew what I was getting in to when I chose that model.

 

[ukeman]

Some Vari's report up to low 4.+ with Dual Coil LR's. I get up to 4.1v with no probs on a 1.8 i06, and i haven't pushed it higher.... no need.i usually stay a 3.7 with it for best flavor.
2.0 lets you go even higher.
I never got more than 3.9 with the LR 1.5 DC's myself, but not really necessary if that's your vape.
I mainly drip SR 901 attys 3.0 at 3.8 to 4.6v, but use others like i06, Iken 1.8's lately. I have 3 different tanks now that i have never set up yet lol... sold my iatty because the draw was airy and have a couple genesis rebuildables on the way.
I bought 50 dse SR 901 from Vaporkings because i have been going through one or two a week (on 2 PV's).
I hate carto's! But want to try them in tanks because they stay filled that way supposedly.
Iken Fusion carto's are said to be the best btw, by many, next to Boge.

Ukeman yea I am using a liquinator rite with the boge 3.0 been liking it at 5volts no problem. What voltage can I take the LRs too.
Which do you prefer cartos or attys?
Thanks

 

[Dalton63841]

What voltage can I take the LRs too.

Using a 1.5ohm 306 atty right now at 4.2v, which is where I also use LR 510's. Wouldn't dream of going higher than that, but it's been performing well at that voltage for a couple weeks now.

 

[Shaitaan]

when I ordered my black chrome, the other 2 were shipping first because the lead time for the black chrome was held back at the plater....and it doesn't matter, it was worth the wait, and yes, I was antsy to recieve mine too....the satin finish you would think shall always have a quicker turn around time, they don't need to be plated or anodized....

I vape my boge and smoktech 2.5's, and my smoktech 1.5 dc 510's at 3.8v, for me all a satisfying vape.... my 2ohm dc's and 3ohm boge 510's from 4.2 to 4.8v with no problems...

 

[cw007]

Ok great thanks for all the info gettin great taste and flavor with the carto/tank setup. But I do want to try the LRs. Where do you guys recommend getting attys from to drip and whats the difference between bridged or not bridged attys. Anyone try the high voltage cartos or attys?

 

[Dalton63841]

Ok great thanks for all the info gettin great taste and flavor with the carto/tank setup. But I do want to try the LRs. Where do you guys recommend getting attys from to drip and whats the difference between bridged or not bridged attys. Anyone try the high voltage cartos or attys?

I use HV atties. My personal sweet spot is 5.7v with a 2.8-3ohm atomizer. The thing about LR atties with the Provari is that you only have a VERY limited range of voltage. 4.2v is about the max.

I personally don't find that much difference between a bridged or de-bridged atty. In fact I got a couple de-bridged atties that were significantly worse performers.

I generally get my atomizers from Ikenvape. They are extremely good performers, and for the most part they seem to last forever.

 

[cw007]

ok how many drops do u drip when you start a new atty sorry for so many questions I am a newbie still to all this lol.

 

[Dalton63841]

ok how many drops do u drip when you start a new atty sorry for so many questions I am a newbie still to all this lol.

With a brand new 510 atty I usually put 6 drips in(although it may flood some atties) and then 3 drips at a time after that.

Also if you don't get ikenvape atties, most come with a primer fluid. For those I blow through the drip tip end, expelling the fluid out through the threaded end into a paper towel. Then I put 6 drops in it and blow it out again to get the remaining primer out. Then 3 drops at a time as normal.