ProVari Variable Voltage Mod

[2legsshrt]

I can see I will have to use the 2.0 Cisco 306s my 1.5s give me an E2 code when they get a little dry at 3.6 to 3.8. They work great but I get about 5 puffs on 3 drops. Different juice varies a little. No big deal they are still awesome have to keep them juiced up is all. 3.8 seems to be my sweet spot with the tobacco flavors I use.

 

[VAPOINSANO]

How could I be mad at Jack Sparrow?

ahhhhh the sparrow,
thanks,i knew that would gethcha!
+you do know that jack here is only an avi right?
you provari owner you!
hope your havin the time of your life w/ that awesome vapin machine?
i am

I can see I will have to use the 2.0 Cisco 306s my 1.5s give me an E2 code when they get a little dry at 3.6 to 3.8. They work great but I get about 5 puffs on 3 drops. Different juice varies a little. No big deal they are still awesome have to keep them juiced up is all. 3.8 seems to be my sweet spot with the tobacco flavors I use.

i used a lr for 5 mins. when i got my provari!
went and got all my reg. attys/carts and let that bad boy run wild!!
i read the best is the 2-2.2ohm's are the beasts sweet spot,
but have used up to 3ohms +baby still sings!
i hav'nt gone below 2ohms since the lr's myself !

 

[Tasteles]

I can see I will have to use the 2.0 Cisco 306s my 1.5s give me an E2 code when they get a little dry at 3.6 to 3.8. They work great but I get about 5 puffs on 3 drops. Different juice varies a little. No big deal they are still awesome have to keep them juiced up is all. 3.8 seems to be my sweet spot with the tobacco flavors I use.

I've had a couple standard attys start getting the E2 error after using it a little. I also noticed that they dropped an ohm or two when they did that. A good cleaning and dry burn at low voltage has returned them to their original ohm reading and stopped the E2 errors. I don't use LR attys so I don't know if you can dry burn those or not. Just posting my experience with the E2.

 

[Laszlo]

.. my 1.5s give me an E2 code when they get a little dry at 3.6 to 3.8.

At 3.8V with 1.5 ohm resistance the current is 2.53 amps, exceeding current limit at 2.5 amps ProVari is set to --> E2 error code.

 

[MonsterKenny]

We are currently waiting on parts to arrive from a vendor scheduled for Monday. So in a couple of days lots more shipments going out and we can catch up with those who are at the three week wait. This next batch going out is a large one so we plan to put a sizeable dent in the pending orders. Once the parts arrive and they look good well let you know how far into the order numbers we get.

 

[darkmonk]

Im hanging here waiting for order 4505 to ship.......... so close LOL

 

[ukeman]

I too use mostly "regular" attys - prefer 901's (2.8 or so), and 510's at 2.2 to 3.5 do the trick.

No tank mods for me; but a Pyrex DT is a MUST HAVE... absolutely the most clog free, juice backflow free way to go for dripping.

Got my back-up Vari today! No need to fool around with anything else but the Vari ...

I have 7 AW IMR 18650's... the 18490's are sitting unused anymore; I don't bother with them either.

Just bragging and profess'n love for Provari.

 

[vaporjoey]

woo hoo!!!!! 4565!!! getting closer.....

 

[jimho]

I too use mostly "regular" attys - prefer 901's (2.8 or so), and 510's at 2.2 to 3.5 do the trick.

No tank mods for me; but a Pyrex DT is a MUST HAVE... absolutely the most clog free, juice backflow free way to go for dripping.

Got my back-up Vari today! No need to fool around with anything else but the Vari ...

I have 7 AW IMR 18650's... the 18490's are sitting unused anymore; I don't bother with them either.

Just bragging and profess'n love for Provari.

I've all but given up on my tank mods too- the MAP just doesn't do it for me- no matter what I do, it seems to give me burnt taste... and if you bang it the wrong way, it leaks.....
I occasionally use the vapemate in the car (when i remember), but around the house, it's more trouble than it's worth....

I've been collecting data for a while- looks like over time, the 18650's seem to be running longer- I'm also rotating through 6 18650's (my 18490's are also collecting dust) ...I'm wondering if resting the batterys after you charge has something to do with it- , or if maybe switching over to the Pila charger may have done something, or just breaking them in for a few months did the trick. Are you seeing similar results?... I'm now getting 5-6 ml running HV attys between 5 and 5.5V (usually 8.5Watts)

 

[ukeman]

I got a 306 Pyrex jug top D/T, that works really good... Iken 3.5 Ohm 306 on one Vari, and a 2.8 - 3.1 Ohm 901 SLB on the other...Blue Pyrex is sweet looking. Both at 4.6 average volts.

I go through 2 18650's a day pretty easily... vape all the time though... a real fiend.

I gotta remember to put it down versus making it a pastime... it's like eating and reading or watching media... a compulsion.

I've all but given up on my tank mods too- the MAP just doesn't do it for me- no matter what I do, it seems to give me burnt taste... and if you bang it the wrong way, it leaks.....
I occasionally use the vapemate in the car (when i remember), but around the house, it's more trouble than it's worth....

I've been collecting data for a while- looks like over time, the 18650's seem to be running longer- I'm also rotating through 6 18650's (my 18490's are also collecting dust) ...I'm wondering if resting the batterys after you charge has something to do with it- , or if maybe switching over to the Pila charger may have done something, or just breaking them in for a few months did the trick. Are you seeing similar results?... I'm now getting 5-6 ml running HV attys between 5 and 5.5V (usually 8.5Watts)

 

[ukeman]

wow, Provape sent along a sample of Fruit Smoothie juice.... wow; tastes just like the real thing! Creamy and fruity... no weirdness at all.

Smart business plan on their part... build the best PV, and have great juice too... this will inaugurate my second Vari.

Creamy Peanut Butter and breakfast and dessert vapes on #1, and lighter vapes on the #2; fruits, and variables.

 

[Vaporologist]

Hey everyone,

It looks like I'm coming to join your badass VV world! Please don't ask what took me so long, I really don't have a good answer for ya...

Just a quick question. Is there a way to customize or rearrange the sequence of the menu? For example, if I would like the Power On/Off option to be the first option on the menu, is there a way to get that done? Thanks.

Btw, order #4971, the original Satin finish...

 

[misterD]

idea???
I wish that there was an adapter that we could slide down into the atty connector so that the juice well wouldn't be too deep allowing the excess juice to be sucked back into the atty and vaped like reo does.

 

[cliffy1]

idea???
I wish that there was an adapter that we could slide down into the atty connector so that the juice well wouldn't be too deep allowing the excess juice to be sucked back into the atty and vaped like reo does.

You dont need it , give this a try put some liquid in the well and see it vanish into the atty........I didn't believe it until I tried it, it all goes

 

[John Edwards]

Im hanging here waiting for order 4505 to ship.......... so close LOL

4689 here... oh the suspense is killing me! LOL ill make it tho, what did u end up going with, darkmonk?

 

[ukeman]

nno thanks; i got too much flooding with those bottom feeders...

i am very picky about my vape... i'd rather drip than anything, and if the deep well prevents flooding in any way, then all the better.

idea???
I wish that there was an adapter that we could slide down into the atty connector so that the juice well wouldn't be too deep allowing the excess juice to be sucked back into the atty and vaped like reo does.

 

[MonsterKenny]

more units went out over night, we are in the #4550+ range, and more will go out during next week! It's going to be a good week for getting orders out for those of you waiting!

 

[Firechief2]

Thanks for the up-date
(#4776 here)

 

[thedeserttortoise]

more units went out over night, we are in the #4550+ range, and more will go out during next week! It's going to be a good week for getting orders out for those of you waiting!

Cool! Almost 2 weeks down.... #4764....yea! Knock them babies out!

 

[thedeserttortoise]

nno thanks; i got too much flooding with those bottom feeders...

i am very picky about my vape... i'd rather drip than anything, and if the deep well prevents flooding in any way, then all the better.

Ditto! Can't beat the drip..... while driving I've been using Clearomisers or 801 Cartos on my 510 Buzz... Clearomisers are a bit hot... the 801 carto's are the next best thing to a drip..