Ahoy and good morning me 'earties! Exciting day here today. Final shaping is one of the most fun parts of making these but also high stress. One slip while routing or sanding may send a lady to a premature meeting with Davy Jones! Arrrrr....
Red Sky Mods
- Thread starter Capt' Brian
- Start date
- th_trl_thread_readers 0
- Status
I didn't know if I should like that or not, cappy. A premature meeting with Davie Jones would be tragic!
Just a note, new requests to be put on the waiting list are going on the batch #9 list. I am currently working on batch #6 so it will probably be 6-8 weeks before I need order info.
Bringing up FAQ and Pre-order post to answer some PM questions I've gotten recently;
Ahoy all, say, I've been getting alot of PM's & E-Mails asking for the same information.
My website is Redskymods.com. If I have any completed mods that have not been snapped up on this thread prior to finishing I will post them there for sale. Friends of the thread get first pick as a reward for frequenting the RSM thread and keeping things lively here
I post pictures of the current batch under construction here and anytime during that process people may 'Pick' one to call their own and decide when I post a picture of the completed mod if they still want it. I will then send an Invoice.
Some of the mods I am building are preorders. I will post a picture of main body wood and end cap woods I have available and the cost of them and you may select from those. There will also be choices for switch types and catch cup types. After you pick, PM me what you desire and we will discuss it and clear up any questions. Then your custom mod will be built during the next batch. Typical construction time is currently about 12 -14 days once I get started depending on the size of the batch.
I am currently building the Mark-5.1 Cutlass as that is where the demand is. No use building a mod that just collects dust on my shelf, like most self employed mod makers I sail a fine course between success and disaster.
The Mark-5.1 Cutlass is described fully on the main page of the website. The website contains alot of information about the models I build and also features some video demonstrations and a gallery of past PV's sold to good homes.
The newest Cutlass has a base price of $179 with an added cost if I use an unusually expensive/rare wood.
Excerpt from the website;
Featuring dual operating modes. Direct battery mode to run unit at 3.7V using 18650 battery types and two battery combinations for 5V, 6V, 7.4V and variable volt mode using dual 18350 type batteries.
Standard features;
3 amp switching regulator
200 thousand cycle Stainless Steel switch
Large stainless steel catch cup
Sealed 6 ml feed system
Native 510 atomizer connector
Digital Voltage display
On/Off switch
Dual mode switch (Direct & variable voltage)
Voltage adjustment tool (mounted to inner door)
If you desire a VV mod without all the electronics (Dual mode/Switches/Voltage Display) to save money, It will run you $139.
As for juice feeding, all the Cutlass mods can be either Upright or Tilt & shoot. The only difference is if it has the 2" flex tube inside the feed bottle, with the tube is upright, without the tube it is T&S.
I have designed the Cutlass to use any make of two 18350 or single 18650 batteries that I know of and provide magnet spacers if your battery is significantly shorter and needs them.
All mods have a 7 day money back, 3 month warranty on parts and labor. If I can't fix it I will also either refund your money or build you a new one to replace it for warranty problems.
Hope that answered most general question
(Reposting with corrected pictures)
Ahoy, here are the available choices for Batch #6.
Once production begins I am estimating 12-14 days to completion if there are no delays.
Base price of the Mark 5.1 Cutlass is $179. Certain wood choices may add to that price and are indicated in the Main Body Wood picture if so.
When the build is complete and they have passed final testing I will post pics of the completed mod and if you approve I will send a Paypal invoice for payment.
Choose Main body wood, end cap wood, Hardware type and edge (round or octagon) and PM me your choices. I will confirm and put you on 'the list'.
Click on pics for expanded view
Main Body wood examples;
End Cap wood selection;
Hardware choices;
Edge Choices;
Rounded -Soft Octagon -
Follow the link for more information about the Cutlass Mark-5.1 - Red Sky Mods - Home
The Cutlass Mark-5.1
Featuring dual operating modes.
1: Direct battery mode to run unit at 3.7V using 18650 battery types and two battery combinations for 5V, 6V, 7.4V. This mode is also used to check the voltage level of AW IMR batteries. Remember to remove atomizer before using this mode as you will apply direct battery power (up to 8.4V) to an atomizer.
2: Variable volt mode using dual 18350 type batteries.
Standard features;
3 amp switching regulator
200 thousand cycle Stainless Steel switch
Choice of Small or Large catch cup
Sealed 6 ml feed system
Native 510 atomizer connector
Digital Voltage display
On/Off switch
Dual mode switch (Direct & variable voltage)
Voltage adjustment tool (mounted to inner door)
All mods come with 3 complete feed bottle assemblies
No need for nerves! Cappy will be gentle... I think.
Ohhh... I like the fancy new "sold" tag but I kinda miss the ol' skull and crossbones.
Ohhh... I like the fancy new "sold" tag but I kinda miss the ol' skull and crossbones.
Last edited:
Yeah, I thought it was kinda cool. Hopefully nobody leaves any inappropriate messages!
Wow that is a while. Ahh well can we PM you to be on batch 9?
Yup, just shoot me a PM or just mention here on the thread and I will put you down for notification when I am ready to post the pre-order information. I will send you a PM with a link to the new wood and hardware selections when your name comes up on the pre-order wait list.
Put me on the wait list Cappy. I want to get one of those non-feeder ones for my tanks.
Bumping it up!
[originally quoted by Capt' Brian]
Ahoy all, say, I've been getting alot of PM's & E-Mails asking for the same information.
My website is Redskymods.com. If I have any completed mods that have not been snapped up on this thread prior to finishing I will post them there for sale. Friends of the thread get first pick as a reward for frequenting the RSM thread and keeping things lively here
I post pictures of the current batch under construction here and anytime during that process people may 'Pick' one to call their own and decide when I post a picture of the completed mod if they still want it. I will then send an Invoice.
Some of the mods I am building are preorders. I will post a picture of main body wood and end cap woods I have available and the cost of them and you may select from those. There will also be choices for switch types and catch cup types. After you pick, PM me what you desire and we will discuss it and clear up any questions. Then your custom mod will be built during the next batch. Typical construction time is currently about 2 weeks once I get started depending on the size of the batch.
I am currently building the Mark-5.1 Cutlass as that is where the demand is. No use building a mod that just collects dust on my shelf, like most self employed mod makers I sail a fine course between success and disaster.
The Mark-5.1 Cutlass is described fully on the main page of the website. The website contains alot of information about the models I build and also features some video demonstrations and a gallery of past PV's sold to good homes.
The newest Cutlass has a base price of $179 with an added cost if I use an unusually expensive/rare wood.
Excerpt from the website;
Featuring dual operating modes. Direct battery mode to run unit at 3.7V using 18650 battery types and two battery combinations for 5V, 6V, 7.4V and variable volt mode using dual 18350 type batteries.
Standard features;
3 amp switching regulator
200 thousand cycle Stainless Steel switch
Large stainless steel catch cup
Sealed 6 ml feed system
Native 510 atomizer connector
Digital Voltage display
On/Off switch
Dual mode switch (Direct & variable voltage)
Voltage adjustment tool (mounted to inner door)
If you desire a VV mod without all the electronics (Dual mode/Switches/Voltage Display) to save money, It will run you $139.
As for juice feeding, all the Cutlass mods can be either Upright or Tilt & shoot. The only difference is if it has the 2" flex tube inside the feed bottle, with the tube is upright, without the tube it is T&S.
I have designed the Cutlass to use any make of two 18350 or single 18650 batteries that I know of and provide magnet spacers if your battery is significantly shorter and needs them.
All mods have a 7 day money back, 3 month warranty on parts and labor. If I can't fix it I will also either refund your money or build you a new one to replace it for warranty problems.
Hope that answered most general questions.
[originally quoted by Capt' Brian]
Ahoy all, say, I've been getting alot of PM's & E-Mails asking for the same information.
My website is Redskymods.com. If I have any completed mods that have not been snapped up on this thread prior to finishing I will post them there for sale. Friends of the thread get first pick as a reward for frequenting the RSM thread and keeping things lively here
I post pictures of the current batch under construction here and anytime during that process people may 'Pick' one to call their own and decide when I post a picture of the completed mod if they still want it. I will then send an Invoice.
Some of the mods I am building are preorders. I will post a picture of main body wood and end cap woods I have available and the cost of them and you may select from those. There will also be choices for switch types and catch cup types. After you pick, PM me what you desire and we will discuss it and clear up any questions. Then your custom mod will be built during the next batch. Typical construction time is currently about 2 weeks once I get started depending on the size of the batch.
I am currently building the Mark-5.1 Cutlass as that is where the demand is. No use building a mod that just collects dust on my shelf, like most self employed mod makers I sail a fine course between success and disaster.
The Mark-5.1 Cutlass is described fully on the main page of the website. The website contains alot of information about the models I build and also features some video demonstrations and a gallery of past PV's sold to good homes.
The newest Cutlass has a base price of $179 with an added cost if I use an unusually expensive/rare wood.
Excerpt from the website;
Featuring dual operating modes. Direct battery mode to run unit at 3.7V using 18650 battery types and two battery combinations for 5V, 6V, 7.4V and variable volt mode using dual 18350 type batteries.
Standard features;
3 amp switching regulator
200 thousand cycle Stainless Steel switch
Large stainless steel catch cup
Sealed 6 ml feed system
Native 510 atomizer connector
Digital Voltage display
On/Off switch
Dual mode switch (Direct & variable voltage)
Voltage adjustment tool (mounted to inner door)
If you desire a VV mod without all the electronics (Dual mode/Switches/Voltage Display) to save money, It will run you $139.
As for juice feeding, all the Cutlass mods can be either Upright or Tilt & shoot. The only difference is if it has the 2" flex tube inside the feed bottle, with the tube is upright, without the tube it is T&S.
I have designed the Cutlass to use any make of two 18350 or single 18650 batteries that I know of and provide magnet spacers if your battery is significantly shorter and needs them.
All mods have a 7 day money back, 3 month warranty on parts and labor. If I can't fix it I will also either refund your money or build you a new one to replace it for warranty problems.
Hope that answered most general questions.
Ahoy, here are the available choices for Batch #6.
Once production begins I am estimating 12-14 days to completion if there are no delays.
Base price of the Mark 5.1 Cutlass is $179. Certain wood choices may add to that price and are indicated in the Main Body Wood picture if so.
When the build is complete and they have passed final testing I will post pics of the completed mod and if you approve I will send a Paypal invoice for payment.
Choose Main body wood, end cap wood, Hardware type and edge (round or octagon) and PM me your choices. I will confirm and put you on 'the list'.
Click on pics for expanded view
Main Body wood examples;
End Cap wood selection;
Hardware choices;
Edge Choices;
Rounded -
Follow the link for more information about the Cutlass Mark-5.1 - Red Sky Mods - Home
The Cutlass Mark-5.1
Featuring dual operating modes.
1: Direct battery mode to run unit at 3.7V using 18650 battery types and two battery combinations for 5V, 6V, 7.4V. This mode is also used to check the voltage level of AW IMR batteries. Remember to remove atomizer before using this mode as you will apply direct battery power (up to 8.4V) to an atomizer.
2: Variable volt mode using dual 18350 type batteries.
Standard features;
3 amp switching regulator
200 thousand cycle Stainless Steel switch
Choice of Small or Large catch cup
Sealed 6 ml feed system
Native 510 atomizer connector
Digital Voltage display
On/Off switch
Dual mode switch (Direct & variable voltage)
Voltage adjustment tool (mounted to inner door)
All mods come with 3 complete feed bottle assemblies
Will do, your now on 'the list'
Cappy, am I on the list for batch #8?
I've gotten a few questions seeing if I got names taken down, so here is the current list by batch order. Batch size is usually 12, but I like to make a few for general/website sales and also I contact more than 9 as occasionally I never hear back from people wanting to be notified. The extra 3 gives me room for extras on the list.
Batch #7
1 michael69
2 E-mail order
3 shire
4 golferman
5 HolaAmigos
6 rubin12
7 E-mail order
8 MustangSallie
9 TheStalker
Batch #8
1 cba191
2 E-mail order
3 E-mail order
4 bluenj
5 Summerdawn
6 Capt.Louisville
7 Slot-Tech
8 tybin
9 Pharein
Batch #9
1 mergryphon
2 ksmith
3 fright88
4 Airborn3
Batch #7
1 michael69
2 E-mail order
3 shire
4 golferman
5 HolaAmigos
6 rubin12
7 E-mail order
8 MustangSallie
9 TheStalker
Batch #8
1 cba191
2 E-mail order
3 E-mail order
4 bluenj
5 Summerdawn
6 Capt.Louisville
7 Slot-Tech
8 tybin
9 Pharein
Batch #9
1 mergryphon
2 ksmith
3 fright88
4 Airborn3
- Status
Similar threads
