Mine is bottom row 2 or 3 from left. They are the same. Looks like somebody copied me.
Red Sky Mods
- Thread starter Capt' Brian
- Start date
- th_trl_thread_readers 0
- Status
Mine is bottom row 2 or 3 from left. They are the same. Looks like somebody copied me.
Top row, third from the left. The purpleheart with redheart endcaps! She shall be dubbed "The Red Lady", in honor of the fearsome 16th century lady pirate.
Or perhaps you copied me
Looks like great minds think alike.
Where's my great mind twin? I think I saw another ebony with box elder caps at some point... or I could be imagining things.
The closest to my great mind twin would be whoever got the redheart panels...
I am off to my therapist and then friends for the evening. Everybody have fun!
Im very keen to order one of the cappys products but how does one go about getting the inlay done? There are two great examples on his website. Something dark with a cross on it and something light with inlaid turquoise.
Also out of the orders how do you know which ones are still available?
Also out of the orders how do you know which ones are still available?
No idea on the inlays but if there are any extras he will post them for sale on his website Red Sky Mods - Home
how is this batch optioned out? I looked at the website, and it didn't really mention options, models (other than the 5.1) or anything like that.
I am going to bring up some general info for people to look at and hopefully answer many of the questions getting thrown my way. The pre-order information is for example only, each new pre-order session gets a updated selection of woods.
Redsky videos; Redskymods on Youtube
Ahoy all, say, I've been getting alot of PM's & E-Mails asking for the same information.
My website is Redskymods.com. If I have any completed mods that have not been snapped up on this thread prior to finishing I will post them there for sale. Friends of the thread get first pick as a reward for frequenting the RSM thread and keeping things lively here
I post pictures of the current batch under construction here and anytime during that process people may 'Pick' one to call their own and decide when I post a picture of the completed mod if they still want it. I will then send an Invoice.
Some of the mods I am building are preorders. I will post a picture of main body wood and end cap woods I have available and the cost of them and you may select from those. There will also be choices for switch types and catch cup types. After you pick, PM me what you desire and we will discuss it and clear up any questions. Then your custom mod will be built during the next batch. Typical construction time is currently about 2 weeks once I get started depending on the size of the batch.
I am currently building the Mark-5.1 Cutlass as that is where the demand is. No use building a mod that just collects dust on my shelf, like most self employed mod makers I sail a fine course between success and disaster.
The Mark-5.1 Cutlass is described fully on the main page of the website. The website contains alot of information about the models I build and also features some video demonstrations and a gallery of past PV's sold to good homes.
The newest Cutlass has a base price of $179 with an added cost if I use an unusually expensive/rare wood.
Excerpt from the website;
Featuring dual operating modes. Direct battery mode to run unit at 3.7V using 18650 battery types and two battery combinations for 5V, 6V, 7.4V and variable volt mode using dual 18350 type batteries.
Standard features;
3 amp switching regulator
200 thousand cycle Stainless Steel switch
Large stainless steel catch cup
Sealed 6 ml feed system
Native 510 atomizer connector
Digital Voltage display
On/Off switch
Dual mode switch (Direct & variable voltage)
Voltage adjustment tool (mounted to inner door)
If you desire a VV mod without all the electronics (Dual mode/Switches/Voltage Display) to save money, It will run you $139.
As for juice feeding, all the Cutlass mods can be either Upright or Tilt & shoot. The only difference is if it has the 2" flex tube inside the feed bottle, with the tube is upright, without the tube it is T&S.
I have designed the Cutlass to use any make of two 18350 or single 18650 batteries that I know of and provide magnet spacers if your battery is significantly shorter and needs them.
All mods have a 7 day money back, 3 month warranty on parts and labor. If I can't fix it I will also either refund your money or build you a new one to replace it for warranty problems.
Hope that answered most general question
(Reposting with corrected pictures)
Ahoy, here are the available choices for Batch #6.
Once production begins I am estimating 12-14 days to completion if there are no delays.
Base price of the Mark 5.1 Cutlass is $179. Certain wood choices may add to that price and are indicated in the Main Body Wood picture if so.
When the build is complete and they have passed final testing I will post pics of the completed mod and if you approve I will send a Paypal invoice for payment.
Choose Main body wood, end cap wood, Hardware type and edge (round or octagon) and PM me your choices. I will confirm and put you on 'the list'.
Click on pics for expanded view
Main Body wood examples;
End Cap wood selection;
Hardware choices;
Edge Choices;
Rounded -Soft Octagon -
Follow the link for more information about the Cutlass Mark-5.1 - Red Sky Mods - Home
The Cutlass Mark-5.1
Featuring dual operating modes.
1: Direct battery mode to run unit at 3.7V using 18650 battery types and two battery combinations for 5V, 6V, 7.4V. This mode is also used to check the voltage level of AW IMR batteries. Remember to remove atomizer before using this mode as you will apply direct battery power (up to 8.4V) to an atomizer.
2: Variable volt mode using dual 18350 type batteries.
Standard features;
3 amp switching regulator
200 thousand cycle Stainless Steel switch
Choice of Small or Large catch cup
Sealed 6 ml feed system
Native 510 atomizer connector
Digital Voltage display
On/Off switch
Dual mode switch (Direct & variable voltage)
Voltage adjustment tool (mounted to inner door)
All mods come with 3 complete feed bottle assemblies
Redsky videos; Redskymods on Youtube
Last edited:
Thanks Cappy. That answered all but one of my questions. Once we get on the pre-order list, is it possible to discuss special options in the box itself? The website shows pictures of some of the mods with a strip of different wood or woods running down the body. Are you still offering that, or is it strictly two woods, one for the main body and one for the end cap?
Mine is the 3rd from the left on the bottom. I can see the E in Airborne on the paper beneath it. Majekh's is the second from left. I can see the H. I hope we can get Cappy to get a pic of the twins side by side before he ships them out.
- Status
Similar threads
