Red Sky Mods
- Thread starter Capt' Brian
- Start date
- th_trl_thread_readers 0
- Status
good morning all,
alldo the day is already over here across the ocean.
maybe a little week and then the awen RSM is home finally, cant wait !!!
alldo the day is already over here across the ocean.
maybe a little week and then the awen RSM is home finally, cant wait !!!
I hope the ship carrying your rsm avoids any typhoons, maelstroms and angry whales! Can you believe Haarun had to wait 81 days for Italian customs to clear his box? Wow ....
Quick question Cappy, can you direct me to the post regarding ordering info?
Ahoy! Here is a new FAQ to answer some of the usual questions I receive regarding RSM;
Website is Red Sky Mods - Home
Most of the mods I build are preorders. During the ordering process you will be shown a picture with all wood and hardware choices available for the batch.
Some very exotic wood choices will increase the base price of the mod. Additional costs are indicated in the selection pictures.
After making your choices, PM me what you desire and we will discuss it and clear up any questions.
Typical construction time is currently about 2-3 weeks once I get started depending on the size of the batch.
Custom engraving is available. The work area for engraving the Cutlass is 1.5" wide and 3" tall. Engravings are limited in detail to the level of a dull pencil drawing, I will reject any image too complex.
Engraving adds a flat-rate of $35 to the base price of the mod. I may require your mod to be prepaid if you request unusual or personalized engravings.
Notify me if you want a Desk Caddy fitted to your mod size included with your order. Sizes and prices will be posted on the website.
Available models are the Mark-5.1 Cutlass and the Mark-6 Wench.
Both models are described fully on the main page of the website. The website also features some video demonstrations and a gallery of past PV's sold to good homes.
The Wench has a base price of $140, the Cutlass $180.
All mods are shipped Priority mail and insured.
All mods have a 7 day money back, 3 month warranty on parts and labor. If I can't fix it I will also either refund your money or build you a new one to replace it for warranty problems.
After construction, if your ordered mod fails final testing for any reason, I will contact you explaining the difficulty and remake you another mod during the construction of the next batch.
Basic troubleshooting tips:
If your RSM suddenly fails to fire, things to check.
1. Did you recently adjust the voltage? The voltage display needs a minimum of 2.7v to light. Turn CW to increase the voltage.
2. Does the display work without an atomizer connected? The atomizer may be shorting out the regulator.
3. Are the batteries tight? You may need 1 or 2 magnet spacers. Place them on the positive (raised) end.
4. Is the battery tab clean? I have received several 'dead' mods where either wax, dried juice or other contaminations have caused it to fail. I simply scrape them clean and send them back.
5. Are the switches making good contact? Try switching them back and forth with the 'Fire' button pressed.
Website is Red Sky Mods - Home
Most of the mods I build are preorders. During the ordering process you will be shown a picture with all wood and hardware choices available for the batch.
Some very exotic wood choices will increase the base price of the mod. Additional costs are indicated in the selection pictures.
After making your choices, PM me what you desire and we will discuss it and clear up any questions.
Typical construction time is currently about 2-3 weeks once I get started depending on the size of the batch.
Custom engraving is available. The work area for engraving the Cutlass is 1.5" wide and 3" tall. Engravings are limited in detail to the level of a dull pencil drawing, I will reject any image too complex.
Engraving adds a flat-rate of $35 to the base price of the mod. I may require your mod to be prepaid if you request unusual or personalized engravings.
Notify me if you want a Desk Caddy fitted to your mod size included with your order. Sizes and prices will be posted on the website.
Available models are the Mark-5.1 Cutlass and the Mark-6 Wench.
Both models are described fully on the main page of the website. The website also features some video demonstrations and a gallery of past PV's sold to good homes.
The Wench has a base price of $140, the Cutlass $180.
All mods are shipped Priority mail and insured.
All mods have a 7 day money back, 3 month warranty on parts and labor. If I can't fix it I will also either refund your money or build you a new one to replace it for warranty problems.
After construction, if your ordered mod fails final testing for any reason, I will contact you explaining the difficulty and remake you another mod during the construction of the next batch.
Basic troubleshooting tips:
If your RSM suddenly fails to fire, things to check.
1. Did you recently adjust the voltage? The voltage display needs a minimum of 2.7v to light. Turn CW to increase the voltage.
2. Does the display work without an atomizer connected? The atomizer may be shorting out the regulator.
3. Are the batteries tight? You may need 1 or 2 magnet spacers. Place them on the positive (raised) end.
4. Is the battery tab clean? I have received several 'dead' mods where either wax, dried juice or other contaminations have caused it to fail. I simply scrape them clean and send them back.
5. Are the switches making good contact? Try switching them back and forth with the 'Fire' button pressed.
Last edited:
Bumping up by request, this is only an EXAMPLE
(Reposting with corrected pictures)
Ahoy, here are the available choices for Batch #6.
Once production begins I am estimating 12-14 days to completion if there are no delays.
Base price of the Mark 5.1 Cutlass is $179. Certain wood choices may add to that price and are indicated in the Main Body Wood picture if so.
When the build is complete and they have passed final testing I will post pics of the completed mod and if you approve I will send a Paypal invoice for payment.
Choose Main body wood, end cap wood, Hardware type and edge (round or octagon) and PM me your choices. I will confirm and put you on 'the list'.
Click on pics for expanded view
Main Body wood examples;
End Cap wood selection;
Hardware choices;
Edge Choices;
Rounded -Soft Octagon -
Follow the link for more information about the Cutlass Mark-5.1 - Red Sky Mods - Home
The Cutlass Mark-5.1
Featuring dual operating modes.
1: Direct battery mode to run unit at 3.7V using 18650 battery types and two battery combinations for 5V, 6V, 7.4V. This mode is also used to check the voltage level of AW IMR batteries. Remember to remove atomizer before using this mode as you will apply direct battery power (up to 8.4V) to an atomizer.
2: Variable volt mode using dual 18350 type batteries.
Standard features;
3 amp switching regulator
200 thousand cycle Stainless Steel switch
Choice of Small or Large catch cup
Sealed 6 ml feed system
Native 510 atomizer connector
Digital Voltage display
On/Off switch
Dual mode switch (Direct & variable voltage)
Voltage adjustment tool (mounted to inner door)
All mods come with 3 complete feed bottle assemblies
Ah well. No Grogg for me. I don't like cinnamon vapes. I am glad you all enjoy it though!
FYI;
Basic troubleshooting tips:
If your RSM suddenly fails to fire, things to check.
1. Did you recently adjust the voltage? The voltage display needs a minimum of 2.7v to light. Turn CW to increase the voltage.
2. Does the display work without an atomizer connected? The atomizer may be shorting out the regulator.
3. Are the batteries tight? You may need 1 or 2 magnet spacers. Place them on the positive (raised) end.
4. Is the battery tab clean? I have received several 'dead' mods where either wax, dried juice or other contaminations have caused it to fail. I simply scrape them clean and send them back.
5. Are the switches making good contact? Try switching them back and forth with the 'Fire' button pressed.
Basic troubleshooting tips:
If your RSM suddenly fails to fire, things to check.
1. Did you recently adjust the voltage? The voltage display needs a minimum of 2.7v to light. Turn CW to increase the voltage.
2. Does the display work without an atomizer connected? The atomizer may be shorting out the regulator.
3. Are the batteries tight? You may need 1 or 2 magnet spacers. Place them on the positive (raised) end.
4. Is the battery tab clean? I have received several 'dead' mods where either wax, dried juice or other contaminations have caused it to fail. I simply scrape them clean and send them back.
5. Are the switches making good contact? Try switching them back and forth with the 'Fire' button pressed.
I managed to pick up a Cutlass Capt, and I have to say it's awesome!!! With a build quality like this, I can't wait for my Wench! 
And let's not forget the juice named after you. 
Have you seen those dos equis commercials? That's me.
- Status
Similar threads
