Reload Rta

Status
Not open for further replies.

ccwaters

Ultra Member
ECF Veteran
Verified Member
Aug 31, 2013
1,779
4,426
Minnesota USA
Think this is my new favorite dual coil tank, I really like it, great flavor, very thirsty little bugger! Only built one so far, but quality is quite nice.


IMGP0006 (Small).JPG
IMGP0011 (Small).JPG
IMGP0101 (Small).JPG
 

franck

Super Member
ECF Veteran
May 8, 2015
677
599
California,USA
You know how @BlackCRX & I said it whistles if you don't have your airflow at 3/4 or fully open? Mine was a SS.

On the Black one you can have airflow 1/2 open & no whistling!:thumbs:
Good to know,thanks for mentioning it,am going to wait til my ss comes in and if all is good I'll get a black and gold,don't really care for all black or all gold but I've seen some were they mix and match the two and they looked pretty sharp,,but I noticed 3fvape have removed that they're kindbright clones,now it just says reload like clone which as me a little concerned that they'll be of the same quality that you all have received,or as another company jumped on the money wagon and started pumping them out as well,I read about a few poor souls that had crooked posts,extra threads on they're decks YIKES,guess we shall find out:-x
 
  • Like
Reactions: Heartsdelight

Heartsdelight

Vaping Master
ECF Veteran
Nov 10, 2015
5,777
19,659
Good to know,thanks for mentioning it,am going to wait til my ss comes in and if all is good I'll get a black and gold,don't really care for all black or all gold but I've seen some were they mix and match the two and they looked pretty sharp,,but I noticed 3fvape have removed that they're kindbright clones,now it just says reload like clone which as me a little concerned that they'll be of the same quality that you all have received,or as another company jumped on the money wagon and started pumping them out as well,I read about a few poor souls that had crooked posts,extra threads on they're decks YIKES,guess we shall find out:-x
Wow these Reloads have caused whoever edits 3f's site a lot of work. You can always open a ticket & ask them if they are still Kindbright clones, they're pretty good at answering.

I saw the guy post on the TVP's vid with pics of his crooked posts :eek:
 
  • Like
Reactions: franck

Heartsdelight

Vaping Master
ECF Veteran
Nov 10, 2015
5,777
19,659
Hey hearts knowing you love single coil rtas have you looked at the govad rta from vandy vapes? It looks pretty nice,it's got that same knurled top cap like the reload;-)
I'm going to wait because of all the horrible seeping issues reported on their Facebook group on the Kylin. Some never had issues like @Gallant a lot received replacement decks & still seeped. Don't feel like going through the hassle.
 

franck

Super Member
ECF Veteran
May 8, 2015
677
599
California,USA
Hi all,so my reload showed up today and I've been having a few issues,one was filling it without it leaking on me,but hearts hooked me up with a remedy that fixed that issue(bless you hearts:thumb:) the other issues am having are o ring related I think,the top one holding the glass on doesn't do that great of a job therefor if I breath on it too hard my tank just pops off,the one on the base isn't any better either,I always have juice around the glass just above the base,I will try and change both out from the spare bag and see if that fixes those issues,any one else run into those issues? If so how did you fix it( if you have ) thanks guys
 
  • Like
Reactions: Heartsdelight

Heartsdelight

Vaping Master
ECF Veteran
Nov 10, 2015
5,777
19,659
Hi all,so my reload showed up today and I've been having a few issues,one was filling it without it leaking on me,but hearts hooked me up with a remedy that fixed that issue(bless you hearts:thumb:) the other issues am having are o ring related I think,the top one holding the glass on doesn't do that great of a job therefor if I breath on it too hard my tank just pops off,the one on the base isn't any better either,I always have juice around the glass just above the base,I will try and change both out from the spare bag and see if that fixes those issues,any one else run into those issues? If so how did you fix it( if you have ) thanks guys
Aww shucks, thanks @franck :wub:
I think if you replace both the o rings it'll be good :)
 
  • Like
Reactions: franck

BlackCRX

Senior Member
ECF Veteran
Feb 20, 2014
210
266
Vancouver Canada
You know how @BlackCRX & I said it whistles if you don't have your airflow at 3/4 or fully open? Mine was a SS.

On the Black one you can have airflow 1/2 open & no whistling!:thumbs:
Wish I got the black one now.
Any visual differences between the black and SS?
I was thinking of using my dremel to round some of the edges in the AFC to see if it makes a difference.
 

BlackCRX

Senior Member
ECF Veteran
Feb 20, 2014
210
266
Vancouver Canada
I'm going to wait because of all the horrible seeping issues reported on their Facebook group on the Kylin. Some never had issues like @Gallant a lot received replacement decks & still seeped. Don't feel like going through the hassle.

I'm a big single coil fan also. Might want to look in to the ammit 25. I have one on pre-order. Reviews so far are pretty good for flavor. Couple of YouTube reviewers actually said the ammit 25 is better for flavor than the Govad. But the Govad has a bigger AFC and better for clouds.

Hi all,so my reload showed up today and I've been having a few issues,one was filling it without it leaking on me,but hearts hooked me up with a remedy that fixed that issue(bless you hearts:thumb:) the other issues am having are o ring related I think,the top one holding the glass on doesn't do that great of a job therefor if I breath on it too hard my tank just pops off,the one on the base isn't any better either,I always have juice around the glass just above the base,I will try and change both out from the spare bag and see if that fixes those issues,any one else run into those issues? If so how did you fix it( if you have ) thanks guys

No issues with O rings on my SS tank. But an OG trick or fix is remove the O ring from the top barrel chimney and wrap some dental floss around were the O rings sits. Install the O ring again and glass, it should give it a tighter and more snug fit.
 

Heartsdelight

Vaping Master
ECF Veteran
Nov 10, 2015
5,777
19,659
I'm a big single coil fan also. Might want to look in to the ammit 25. I have one on pre-order. Reviews so far are pretty good for flavor. Couple of YouTube reviewers actually said the ammit 25 is better for flavor than the Govad. But the Govad has a bigger AFC and better for clouds.



No issues with O rings on my SS tank. But an OG trick or fix is remove the O ring from the top barrel chimney and wrap some dental floss around were the O rings sits. Install the O ring again and glass, it should give it a tighter and more snug fit.
I was looking at the Ammit 25 djlsb vapes thinks the flavor is better than the Govad.

It's a great idea trying the dental floss. Yeah poor @franck is having a terrible time with it leaking from where the base & glass meet.
 
  • Like
Reactions: franck

BlackCRX

Senior Member
ECF Veteran
Feb 20, 2014
210
266
Vancouver Canada
I was looking at the Ammit 25 djlsb vapes thinks the flavor is better than the Govad.

It's a great idea trying the dental floss. Yeah poor @franck is having a terrible time with it leaking from where the base & glass meet.
If that's the case, maybe try this. The glass sits inside the base as opposed to the glass sitting on the outside of the top chimney.

So, when assembling the tank. Install the glass in to the base making sure it is in center and flat. Then screw on the top chimney. This will ensure that the bottom of the glass is perfectly seated in to the base.

As opposed to having the glass in the top chimney and screwing it down to the base. If the glass is not perfectly straight in the top chimney it will not mate flat or straight to the base.

Hope that makes sense.
 

franck

Super Member
ECF Veteran
May 8, 2015
677
599
California,USA
I'm a big single coil fan also. Might want to look in to the ammit 25. I have one on pre-order. Reviews so far are pretty good for flavor. Couple of YouTube reviewers actually said the ammit 25 is better for flavor than the Govad. But the Govad has a bigger AFC and better for clouds.



No issues with O rings on my SS tank. But an OG trick or fix is remove the O ring from the top barrel chimney and wrap some dental floss around were the O rings sits. Install the O ring again and glass, it should give it a tighter and more snug fit.
Thanks blacks I'll get it a shot
 
  • Like
Reactions: Heartsdelight

franck

Super Member
ECF Veteran
May 8, 2015
677
599
California,USA
If that's the case, maybe try this. The glass sits inside the base as opposed to the glass sitting on the outside of the top chimney.

So, when assembling the tank. Install the glass in to the base making sure it is in center and flat. Then screw on the top chimney. This will ensure that the bottom of the glass is perfectly seated in to the base.

As opposed to having the glass in the top chimney and screwing it down to the base. If the glass is not perfectly straight in the top chimney it will not mate flat or straight to the base.

Hope that makes sense.
Roger that :thumb:
 
  • Like
Reactions: Heartsdelight
Status
Not open for further replies.

Users who are viewing this thread