My first bf modding - actually my first modding of any kind. The Igo-F - fits perfectly on the standard Reo and works very well.
Thanks for posting this, I may try one myself!
Reo compatible RBAs
- Thread starter hildicat
- Start date
- th_trl_thread_readers 0
-
- Tags
- evic fasttech mt baker myvaporstore
- Status
Thanks for posting this, I may try one myself!
Very nice, smooth notch in the center pin. What did you use to make the notch?
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Fantastic Paul!
I have put mine through the test the last couple weeks with no issues at all. Seems the o-rings have a spectacular tolerance for fit. Thinking about it, most atomizers with small combustion chambers seem to have the best flavor.
I expected to have to modify my feeder hole a bit lower but, as I mentioned on another thread am glad I vaped it as is. I suspect the change on the Cyclone came when someone @ Vicious Ant thought a higher hole may soak the wick more efficiently? without affecting the drainage
I am quite impressed with the construction and performance. Looking for #2 here shortly.
I hope you get much enjoyment!
Thanks Idaho,
I am still enjoying it. It is a great little atti.
The only downside is that I keep looking at it thinking its not straight but I am sure it's because of the curved sides.
Compared to the results some folks have shown, your cut is very smooth
The important thing is that it's working well for you.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
I just placed an order for the Enigma v2 RDA. It is 22 mm and made in the USA. The coolest part is that it comes with an extra gold plated positive post with an isulator. It is perfect for us in case we mess up drilling/dremeling the first time! My buddy has one and it is really nice, vapes pretty much inline with most basic 22mm atomizers like the Patriot (but hits harder due to the gold plated positive. Only con is that it does not come with adjustable airflow or a reduced chamber. Its a steal for an American made RDA around 50 + bucks. When they first came out they were a lot pricier but the price has dropped drastically. Maybe they are clearing inventory or going out of business.
Last edited:
Where did you order from? would like to check it out.
I just placed an order for the Enigma v2 RDA. It is 22 mm and made in the USA. The coolest part is that it comes with an extra gold plated positive post with an isulator. It is perfect for us in case we mess up drilling/dremeling the first time! My buddy has one and it is really nice, vapes pretty much inline with most basic 22mm atomizers like the Patriot (but hits harder due to the gold plated positive. Only con is that it does not come with adjustable airflow or a reduced chamber. Its a steal for an American made RDA around 50 + bucks. When they first came out they were a lot pricier but the price has dropped drastically. Maybe they are clearing inventory or going out of business.
Will a 22mm RDA fit? Perhaps on the LP model?
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
i use a Origen 2 b/f... Rob set the LP to fit so I don't know if it was different than a normal LP... works fabulous!
I like how easy to fire without depressing the spring all the way; just a slight push on the button to make contact with top button of my AW IMR 1600's.
Using .4 ohms the dualie does go through juice and batts though.
1st mod trident rda dual feeding slots for dual coils. works perfectly
Sent from my GT-I9500 using Tapatalk HD
Sent from my GT-I9500 using Tapatalk HD
Threw the brass cap onto the Brass Monkey, drilled out to 5/64" (x2), and put it on the Reo. This things hits like a million bucks! Get a bunch of hits before having to redrip. Love the look of it too. I really wish I could find someone to make this a bf atty. Any ideas? I think the center block on this one would make it tough, if not impossible.
Using dual 26ga parallel coils, coming in at .35ohms, with Koh Gen Do cotton. This thing is a monster
[/URL][/IMG]
Using dual 26ga parallel coils, coming in at .35ohms, with Koh Gen Do cotton. This thing is a monster
Origen BF Kit arrived. I am not crazy about the vape yet but it can double a weapon. Need to play with this a bit to get it right for me.
View attachment 336215
View attachment 336215
Last edited:
The origen is a clone I got off ebay before I found ECF and new the difference. The BF kit was from Vaping Craze.
Back on the sub $20 reviews - I have used a Mini A6 from FT for the past month, it needed modding for bottom feed (and is easy to do so).
It is now my favorite sub $20 due to easy cap removal, yet the cap will not come off in your pocket, no external leakage, just overall really easy to live with, short in height, nice shiny finish and well made, and a great vape. I prefer it to my Cyclone, but not by much, and personal preferences can be all over the place and vary with coil power/gauge/placement and juices vaped etc. Maybe should have just said YMMV
ETA - the Divo look-a-likes from FT arrived and are quite tall but look quite OK. Haven't fired one up yet. They have the usual tight fit black o-rings but the only way to judge them is to use the atty...
It is now my favorite sub $20 due to easy cap removal, yet the cap will not come off in your pocket, no external leakage, just overall really easy to live with, short in height, nice shiny finish and well made, and a great vape. I prefer it to my Cyclone, but not by much, and personal preferences can be all over the place and vary with coil power/gauge/placement and juices vaped etc. Maybe should have just said YMMV
ETA - the Divo look-a-likes from FT arrived and are quite tall but look quite OK. Haven't fired one up yet. They have the usual tight fit black o-rings but the only way to judge them is to use the atty...
Last edited:
With the Cyclone AFC top cap (Cyclops) fit on my original bf Cyclone?
ETA: Got my answer, and it was the one I wanted to hear. Thanks!
ETA: Got my answer, and it was the one I wanted to hear. Thanks!
Last edited:
I was about to jump on it. They are in stock. Just expensive and crazy shipping price to the US. Anyone use one is it worth that much?
Patrao this one https://www.fasttech.com/products/1677400
Haven't coiled it up yet.
Haven't coiled it up yet.
- Status
Similar threads
