Rigmod Hotcig Squonk RSQ 80W Box Mod

[zoiDman]

I like the modification. I am kinda OCD about the looks of my mods. A cheesy picture of an oil rig taking up one side of my mod is something that would bother me quite a bit, possibly stop me from buying the mod honestly. If it is going to have a picture covering an entire side of the mod, it has got to be a picture I like.

Yeah... I'm Not really into Big Logos. I would have spent an Extra 5 Bucks to get one without the Oil Rig on it.

And to make things Worse, it was ever so slightly Laser Etched off center.

I knew there was a Good Chance that I would break thru to the Copper when I sanded it. So when I did, I wasn't all that Upset.

 

[Dropmyload]

I enjoy my RSQ...using it with a Hadeon clone right now in TC mode and works perfectly. Was thinking of getting another one, maybe black or gunmetal.

 

[t8kiteasy]

Actually with the rig logo sanded off it does not look at all like I thought it would,looks like a sticker removed.

 

[Kickingthesticks]

Is the 510 pin on the rsq adjustable? Some of my sqounk rdas have a bit longer pins and doesn't sit flush.

 

[t8kiteasy]

Is the 510 pin on the rsq adjustable? Some of my sqounk rdas have a bit longer pins and doesn't sit flush.

No,it is spring loaded with a very stiff spring. When you screw down your RDA once it stops spinning down freely STOP. Do not keep going down you will break the 510.

 

[zoiDman]

Is the 510 pin on the rsq adjustable? Some of my sqounk rdas have a bit longer pins and doesn't sit flush.

These work Very Well for taking up the Gap between a RDA and the Mod.

$4.01 Replacement PC Heat Insulation Gasket for Atomizers (10-Pack) 10-pack - for 22mm diameter atomizer at FastTech - Worldwide Free Shipping

$1.58 AOLVAPE Replacement Heat Insulation Gasket for Atomizer (5-Pack) 5-pack - for 24mm diameter atomizer at FastTech - Worldwide Free Shipping

 

[Jet Knight]

Just ordered one for around $50 shipped. Was looking for a quality small sized regulated mod I can use when I go outdoors or at work. Hope it compares well with my Pico Squeeze 2

 

[b.m.]

Just ordered one for around $50 shipped. Was looking for a quality small sized regulated mod I can use when I go outdoors or at work. Hope it compares well with my Pico Squeeze 2

I haven't used the squeeze 2,so can't compare there,but my 3 Rsq's have pretty much shelved all of my other regulated mods,including a few Dna 75 mods.

 

[t8kiteasy]

As posted above my RSQ has been my go to over every device I have and use. I have also ordered two more just in case,chit happens?

I thnk you will be pleased with the device. If memory is correct the squeeze 2 has that battery cap on top too? The RSQ does not have that and will seem even smaller than that device.

 

[Nick N]

But where those panels at? I wish they would release them somewhere.

Sent from my PH-1 using Tapatalk

 

[b.m.]

But where those panels at? I wish they would release them somewhere.

Sent from my PH-1 using Tapatalk

Have you seen the stab wood panels for these?Very cool looking,but quite expensive too haha.
Zapwraps has panels for these now.
Hotcig RSQ Squonker wraps
And here is the stab wood panels.
TRVPPED OUT STABILIZED WOOD VENEER / PANEL FOR HOTCIG RSQ SQUONK MOD BY CANADIAN CUSTOM VAPES

 

[Nick N]

Those look great but I put my $ toward a Recurve RDA, the 22mm black frosted conversion cap, and some extra Recurve resin drip tips.

Sent from my PH-1 using Tapatalk

 

[t8kiteasy]

Anyone see the new RSQ NS Kit coming out??

Saw DJLSB video earlier today and I don't get why they did this??? Scratching my head?

 

[flavourchaser]

Yeah i saw the review. Probably it's to compete with the Pulse X. About DJLSB's review, the wattage is a bit under powered, also the temp control on single coil is a bit low temp. Would of like to see more firmware updates come out on this mod, but continuous firmware support seems very low.

 

[score69]

Anyone see the new RSQ NS Kit coming out??

Saw DJLSB video earlier today and I don't get why they did this??? Scratching my head?

Here's the link:



I'm guessing somebody in marketing thought this was a good idea? Maybe they are trying to market the kit to nic salt users who don't realize the mod doesn't really matter. Or that any MTL RDA could be used depending on the build?

I'm not familiar with the RDA, is it a new RDA? Maybe they are using a new RDA to market it as a kit with the original mod.

I kind of like the new sticker on the panels compared to the original stickers they used though. Not enough to make me buy another though, lol.

Are there even any real differences in the mod? One thing I like is it doesn't appear the oil rig logo is on the side? That's one thing that annoy me about the RSQ.

 

[t8kiteasy]

Only differences I saw in mod was the color of the wrap .
Never heard of the RDA they could have made it for the kit??

Why not just use the RSQ mod all ready out ?? It does not look like much of anything apart from color of wrap,changed on the mod. Unless the color of the mod was darker too still guessing and wondering???

 

[flavourchaser]

Here's the link:

One thing I like is it doesn't appear the oil rig logo is on the side? That's one thing that annoy me about the RSQ.

Yeah that was the reason I never bought one, the logo was a bit too much

 

[zoiDman]

They Listened!

LOL

Yeah... I'm Not really into Big Logos. I would have spent an Extra 5 Bucks to get one without the Oil Rig on it.

And to make things Worse, it was ever so slightly Laser Etched off center.

I knew there was a Good Chance that I would break thru to the Copper when I sanded it. So when I did, I wasn't all that Upset.

 

[zoiDman]

...

Saw DJLSB video earlier today and I don't get why they did this??? Scratching my head?

So they Didn't have to Pay RigMod a portion of the Sales?

 

[t8kiteasy]

I watched the video closer this time and finally caught that rigmod is taken off. I know some did not like the rig logo or the black carbon fiber wrap. It still boggles my mind hotcig did this with rig mod RSQ devices still being sold. Oh well.