Does anyone have the Step By Step instructions (PDF File) for building the scubagen mod. Also the list of what you need... (Ie. The type of Mesh, Wick, Wire)
Scubagen Mods
- Thread starter UA72Riddle
- Start date
- th_trl_thread_readers 0
- Status
Here is some info
http://www.e-cigarette-forum.com/forum/modding-forum/206672-fender0942-bstedhs-scubagenv3-co-op-discussion-7.html#post3881723
Also go to the very first post of this thread.
The Integrated SGV3 PV is now the ZVCGPV-1 (Zen Vertical Coil Genesis PV)
I decided to try a single sided wick without the curve in this new PV. It works exceptionally well and wicks fine with SS400 and 30% VG juice. The negative screw is threaded right into the head, and the positive connection is a CE2 center post on top of a 12ga copper rod. I poked a small nail from the SGV3 co-op into the carto center tube for the positive connector. 2.1 ohm Kanthal 32 coil.
I decided to try a single sided wick without the curve in this new PV. It works exceptionally well and wicks fine with SS400 and 30% VG juice. The negative screw is threaded right into the head, and the positive connection is a CE2 center post on top of a 12ga copper rod. I poked a small nail from the SGV3 co-op into the carto center tube for the positive connector. 2.1 ohm Kanthal 32 coil.
Last edited:
Zen, real nice, was hoping to see where the switch was. To manage that glow from the positive terminal, push the wick closer to it with your finger as you insert the nail, and it will keep it closer. A little bend is fine. 
still nothing on either email address. I wonder if it is the two dots in a standard roadrunner address.
Nice work 'zen'! Reminds me of the Hybrid I had to sell recently.... miss it already.
For the petition; I had no trouble signing up for an account but did validating it; won't let me.
For the petition; I had no trouble signing up for an account but did validating it; won't let me.
I ignored the top backward letters and crap and typed in the bottom one and it went through.
Robert
I got through all that and get a message that said I would soon get an email to complete the process,,, but no email none, natta, zip, zilch.
Just keep refreshing that stupid captcha until it gives you one a human can read.
Get yourself a disposable gmail address Gummy, they are great for giving to people you don't want to bother with!
There once was a modder from Trent
Who would get his mail before it was sent.
Who would get his mail before it was sent.
Last edited:
GB i do believe you need to start getting out of the house just a bit lololol.
But maybe its the cooler weather making you like this. just kidding man
But maybe its the cooler weather making you like this. just kidding man
Ok last piece made...
Got the connector piece made for G-Tank-US and it is time to thread, only one problem, I have the lathe setup for 32tpi but I only have an external threading bit, I have two of another type of bit (duplicated same bit in order), but no internal bit sooooo I am stuck waiting for the tap and die to arrive, needed to chase the threads anyway. So I am off looking for an internal thread bit. But here is the stackup with the tank, and with the t-tank adapter. With all the pieces just setting on each other until I can get them threaded.
Anyway here is what it looks like on my provari, so you can see how big it will be.
Dan
Got the connector piece made for G-Tank-US and it is time to thread, only one problem, I have the lathe setup for 32tpi but I only have an external threading bit, I have two of another type of bit (duplicated same bit in order), but no internal bit
sooooo I am stuck waiting for the tap and die to arrive, needed to chase the threads anyway. So I am off looking for an internal thread bit. But here is the stackup with the tank, and with the t-tank adapter. With all the pieces just setting on each other until I can get them threaded.Anyway here is what it looks like on my provari, so you can see how big it will be.
Dan
Last edited:
Dan, an internal threading bit is pretty easy to make if you have some tool steel around...
Tutorial: http://firearmsdesigner.com/?p=85
Here's a pic of one:
Tutorial: http://firearmsdesigner.com/?p=85
Here's a pic of one:
Last edited:
This is going to be awesome! Can't wait to get my hands on this set up!
Hey Dan....any suggestions on making a coil for 5v vaping? Asking you since you use a provari all the time...
Hey Dan....any suggestions on making a coil for 5v vaping? Asking you since you use a provari all the time...
Cool design will give it a shot
Dan
It's a really easy build... 15-20 minutes and you'll have the tool, and it will work as well or better than the higher priced index-able tools they sell.
- Status
Similar threads
