Scubagen Mods

[bellemerlord]

OK, thank you for the photo with the Ego. The size is similar to the Genesis LV. So the main advantage of the G-tank for me over the GLV, the size, isn't there anymore. So I'm using me GLVs and waiting for a small alternative.

Sent from my MB525 using Tapatalk

 

[Led Hendriani]

Well I guess if I fry my ePower, then I will just gut the innards and run it direct with a different switch in the switch body (IF I can get it apart that is!)

 

[Led Hendriani]

I have another question:

Does the G-tank-US have a way to adjust the airflow to allow for various eliquids at various viscosities?

Thanks!

 

[UA72Riddle]

I have another question:

Does the G-Tank-US have a way to adjust the airflow to allow for various eLiquids at various viscosities?

Thanks!

Gtank doesn't, but the awesome DSUv6 does...

 

[ainako]

DSUv6? What is that? Sounds fancy

Sent from my DROIDX using Tapatalk

 

[otrem]

I have another question:

Does the G-Tank-US have a way to adjust the airflow to allow for various eLiquids at various viscosities?

Thanks!

use #400mesh for thinner liquid. and maybe #300mesh for thicker juice.

 

[Scubabatdan]

OK, thank you for the photo with the Ego. The size is similar to the Genesis LV. So the main advantage of the G-Tank for me over the GLV, the size, isn't there anymore. So I'm using me GLVs and waiting for a small alternative.

Sent from my MB525 using Tapatalk

No problem, Here is a size comparision of some different atties...
From the left...

DSUv6, G_Tank-US, G-Tank, Micro-G, BFG (In progress), and an EGO B T-Tank


The only differance between LV Genisis, and G-Tank-US is you have 3 different tank options, 3ml, 5ml, or T-Tank. and the 3 & 5ml tanks are SS not glass bottles.
Hope this helps,
Dan

BTW no questions on BFG, I am still working on it.

 

[raceengine]

No problem, Here is a size comparision of some different atties...
From the left...

DSUv6, G_Tank-US, G-Tank, Micro-G, BFG (In progress), and an EGO B T-Tank
View attachment 58072

The only differance between LV Genisis, and G-Tank-US is you have 3 different tank options, 3ml, 5ml, or T-Tank. and the 3 & 5ml tanks are SS not glass bottles.
Hope this helps,
Dan

BTW no questions on BFG, I am still working on it.

I just had to ask... what's the BFG?

 

[asdaq]

BFG, BFG... Bottom fed genisis? For those that like to squeeze?
sent from my HTC genisis using Tapatalk

 

[Scubabatdan]

I just had to ask... what's the BFG?

BFG, BFG... Bottom fed genisis? For those that like to squeeze?
sent from my HTC genisis using Tapatalk

Whistle Whistle.... hmmmm hmmm hmmmm

 

[raceengine]

Whistle Whistle.... hmmmm hmmm hmmmm

naughty naughty....

it does kinda look like a bottom feeder genisis...

 

[Darkreign]

Dan... I am starting to think you are off of your ADHD meds... G-Tank US, DSU6, and now a BFG before the first one even makes it into co-op...

 

[Scubabatdan]

Dan... I am starting to think you are off of your ADHD meds... G-Tank US, DSU6, and now a BFG before the first one even makes it into co-op...

LOL, I do not hav... ohhhh look a fly, I wonder how those tiny wings can sup..
ummm I see what you mean
I already have another atty visulized in my mind after BFG... I know sad....
Dan

 

[ainako]

Micro-G and BFG are looking NICE! Dan you are a saint!

 

[jmarkus]

not only is dan doing all this amazing atty work, but somehow finds time to help other less talented fellow modders out! i just wanna give a huge shout out to dan for being a super hero. literally.

 

[icgns]

Hi Dan,
From the list of parts for the G tank US I see you have a PTFE (Teflon) spacer that I assume is for the brass center pin, also nylon washer, spacer and screw. Should I understand that the insulation for one contact screw is made of Nylon? If so how resistant to high temperature is it? What is the nylon screw for? Also is the mesh going into the SS tank through a SS tube or insulated one. I apologize for all this questions but I am quite new to the forum and trying to catch up.
Thank you, Michael

 

[totaltechsvc]

Dan, very nice work. I want 2 of anything you send to co-op lol. Seriously though 2 of each.

 

[Scubabatdan]

Hi Dan,
From the list of parts for the G tank US I see you have a PTFE (Teflon) spacer that I assume is for the brass center pin, also nylon washer, spacer and screw. Should I understand that the insulation for one contact screw is made of Nylon? If so how resistant to high temperature is it? What is the nylon screw for? Also is the mesh going into the SS tank through a SS tube or insulated one. I apologize for all this questions but I am quite new to the forum and trying to catch up.
Thank you, Michael

The nylon spacer is for the brass electrical connection, as is the two washers. The nylon screw is for the pos post isolation that the pos post screws through to get to the tapped brass plate. The PTFE tubing is for the lower set hole the SS sits in and the upper hole where it enters the SS tank.

That help?
Dan

 

[icgns]

Thank you. So the pos post which is very hot goes through the nylon screw. How does the nylon withstand the high temperature? Also how do you fill the ss tanks? Is it any top access hole or one has to remove it and use the mesh hole for filling.
I know you do not have time for a full sketch or rendering, but from your explanations I hope to get a better image.
Michael

 

[bstedh]

Thank you. So the pos post which is very hot goes through the nylon screw. How does the nylon withstand the high temperature? Also how do you fill the ss tanks? Is it any top access hole or one has to remove it and use the mesh hole for filling.
I know you do not have time for a full sketch or rendering, but from your explanations I hope to get a better image.
Michael

The tank is held on with an O-ring. so you unscrew the cover then just turn the unit upside down and pull the tank off. fill the open end. press it back on and flip right side up... screw the cover back on.

Drawings and pictures are located further down in the thread that give good views of the setup.

http://www.e-cigarette-forum.com/forum/modding-forum/194934-scubagen-mods-2.html#post4368912