I ordered mine from them on ebay. I do know they respond quickly to emails. That's cheap! I'm jealous. I ordered mine just a couple days ago, post pics and your thoughts when you get it! What color you order?
Sigelei 100 watt dual 18650 box mod
- Thread starter wallacecarey
- Start date
- th_trl_thread_readers 0
- Status
I have had mine pre-ordered from VapeNW for a few weeks now. I wish i would have been paying closer attention to the "sold" number myself. He got in 90 and apparently shipped them all friday. Im pretty sure that mine was 90 something! Dammit!
I also wondering on the boards ins and outs, as was mentioned earlier the walking vaper first look video shows 6.5 volts at .4 ohms, where as the slideshow says .3 or you run into the voltage limit. And in the other video the asian guy wraps a .17 and says he's getting 4.1 volts.
I was hoping that someone somewhere would post a more in depth video today and put it through some hoops for us.
I also wondering on the boards ins and outs, as was mentioned earlier the walking vaper first look video shows 6.5 volts at .4 ohms, where as the slideshow says .3 or you run into the voltage limit. And in the other video the asian guy wraps a .17 and says he's getting 4.1 volts.
I was hoping that someone somewhere would post a more in depth video today and put it through some hoops for us.
VapeNW also only has Silver ordered, which i also wish i would have noticed before pressing BIN, as the black was what i was wanting. But he also told me that 2 carbon fiber sheets will ship with the units that will break up on that silver on the sides of the mod. And as we now know, the magnets look to be good and strong eliminating the need to even have the screws installed. I prefer to have the easy access myself. I converted my Cana with magnets, and as you can see with a wrap placed on the door, it looks quite seamless.
Hey all, for those of you that were interested in the silicon cases from sigelei 100W mod. I went onto the chat app I use to talk with her and noticed she's was not available. I then remembered that they are on holiday. It's called the Mid-Autumn Day Festival. So it looks like it will be tomorrow before I can get an answer.
Please stay tuned
Please stay tuned
Well, word from the Reddit prebuy is that the first ten units will hit our guy today (Mon 9/8) and the first ten (which I'm lucky enough to be part of) will ship tomorrow. The other 90 will be in middle of next week.
If I get it early enough and there aren't any reviews up I'll mess around with it and post a first impression.
If I get it early enough and there aren't any reviews up I'll mess around with it and post a first impression.
I spoke with J-wraps via email and Amanda said they will have wraps for this mod as soon as it is released and to watch for the announcement on fb. I kindly let her know the first batches are in shipping, with a couple people already having them. I really want to go this route because of cost and all the designs they have. Unless anyone can add something I don't know.Hey all, for those of you that were interested in the silicon cases from Sigelei 100W mod. I went onto the chat app I use to talk with her and noticed she's was not available. I then remembered that they are on holiday. It's called the Mid-Autumn Day Festival. So it looks like it will be tomorrow before I can get an answer.
Please stay tuned
But please let us know what you hear back. Also, I can't find either products you posted on their site. If you have a link it would be appreciated.I have a friend who would be interested in the leather belt holder.
Is the sigelei 100w batterys in series or parallel? From one picture I saw, the batterys looked to be installed in series, (which is not good right?)
From my understanding batterys in series doubles the voltage but keeps the mAh's the same as one battery (BAD)
and batterys in parallel keeps the voltage the same as having one battery (4.2v) but dubles the mAh's or the life of the batterys (GOOD)
Im pretty sure the ipv3 and Coulpor T8 both are using batterys in series but was hopeful the Sigelei would be in parallel, but after seeing that picture I'm not so hopeful anymore.
Edit: here's the picture of the mod with the batterys installed, which seem to be in series.
From my understanding batterys in series doubles the voltage but keeps the mAh's the same as one battery (BAD)
and batterys in parallel keeps the voltage the same as having one battery (4.2v) but dubles the mAh's or the life of the batterys (GOOD)
Im pretty sure the ipv3 and Coulpor T8 both are using batterys in series but was hopeful the Sigelei would be in parallel, but after seeing that picture I'm not so hopeful anymore.
Edit: here's the picture of the mod with the batterys installed, which seem to be in series.
Last edited:
I wanna know too. I know that it has more to do with Amps and not mah. I think either way the mah's are added together and the chip is what makes the voltage increase or decrease in these type of mods. But amp limits add together in one way either series or parallel. Idk.
This is what I found on series and parallel
Serial connection of four cells
Adding cells in a string increases the voltage; the current remains the same.
Parallel connection of four cells
With parallel cells, the current handling and runtime increases while voltage stays the same.
Serial connection of four cells
Adding cells in a string increases the voltage; the current remains the same.
Parallel connection of four cells
With parallel cells, the current handling and runtime increases while voltage stays the same.
Last edited:
Hmm I wonder why people always act like dual 18650 will have a longer runtime then.
I ordered a black one and I just received email from vapercompany that it has shipped
I didn't think it was going to ship this week because their update on website from yesterday said they were getting ten units today and they'll go to the first ten orders with more units being shipped to them next week or something. I guess I was one of the first ten after all
Got mine today. I dig it even though you still have to sub ohm on it to get the full 100 watts. The back plate is magnetic, but can also use the screws. Just wish it had come with some kind of hole cover for the screw holes if you didn't want to use the screws. The adjustable pin is reverse threaded too so be careful not to jam it up. It does come with a spare set of cover screws and a spare center pin screw. There is no USB port on it and it is not firmware upgradeable. But all in all, it's a solid device. 10W to 100 W. 10 - 50 adjustable in 0.1 increments then going above fifty it adjusts in 1W increments. I'm enjoying it right now with a dual 0.4 ohm build.
I still haven's even received my 50 watt It's lame that the 100w was released later and people still haven't received their 50 watts >:O
It's lame that the 100w was released later and people still haven't received their 50 watts >:O
How's the battery life? And is the resistance pretty acurate?
I'm glad that you don't have to sub real low like .3 to reach 100 watts. Imma try and rig up screw hole plugs or something until I get it wrapped.
I'm glad your enjoying it. Sounds awesome to me. Is the max voltage output 7v?
I know, the duel battery life was what I really was looking forward to, not 100+ watts. I don't think I need that many watts but I do think I need 2 battery's.
Hopefully I'm wrong and we get a 5000+ mAh device, all day vape for sure, and night to.
- Status
