They seem exactly the same. In fact, I get a little tube wobble on the V5 with 18500, just like I did on the V3s without Noalox. That situation will be cured when I put Noalox on the V5.
Last edited:
I spent yesterday at the marina doing maintenance on the boat. One of the berthers walked by while I was using the Sigelei and told me "Those things aren't good for you". He was upwind six feet from me and stunk of cigarettes. What can I say? He's new to the marina and bait fishes for catfish.
Believe it or not, a lot people still don't know squat about vaping.
Slight update, after talking with Sweet Vapes, they are sending me a replacement. They were very interested in it's crazy behavior, and after discussion and trying a few things, it seems that the boosting circuit just isn't working. The Zmax is behaving just like a mech. I'm getting what the battery has, no more and no less. Can't wait for the new one!
Big round of thanks to Tunggua! My 6 month old Zmax V3 suddenly wouldn't fire tonight. GRRRR! Because of this thread, I knew to try Noalox on the threads. (a tip that REALLY truly works---usually) Anyway, tonight after changing to a fresh battery, I couldn't 5 click it on. I tried Yzer's technique of 100 clicks...no go. I furious searched this thread, and lo and behold...Tunggua Technique to the rescue. So far, so good, my V3 is back to form.And talking about buttons, both my V5 and SVD exhibit the non-firing issue occasionally. What worked for me so far is to depress the button and turn it left and right a couple of times.
The batteries are not good for pushing power.
Look at the chart at 5 amps in the description. That battery hits 3.2 zmax cut off in 100mah ! The imr lasts 5 times longer at 5 amps!!! You have to use high drain imrs because the zmax regularly pulls 6 amps from the battery for the boost circuitry, I've heard it can hit up to 8amps draw. That is why you need high drain imrs.
With what you have if you put a 3 ohm coil on it you will get equal readings. Because a 3ohm coil at 6v is 2 amps. 12 watts of power. That is the highest you can go if your batter only alows the sig to do 2 amps.... 3 ohms will perform better with more vapor than the 2 ohms your using now. Your actually losing power by over coiling for you amp limit available.
I regularly use 3 ohms. Put a 3 on it and you will get 12w @ 3ohms instead of 7.6w at 1.9ohms. More power with higher ohms due to amp limitations. You can only fully power coils 2.4 ohms or higher with a single battery. Below 2.4 you get loss due to amp load/limit
Look at shadows chart https://docs.google.com/spreadsheet...xZLVd5aDkwUEJEZXc&f=true&noheader=false&gid=1
You'll see it in black and white. Watts is heat/power. Don't short yourself. That's the power of ohms to amp limit.
Oh and welcome to the group! You'll find everything you need to know to make your sigelie work for you.
Reporting back after using my V5 for about 4 months if I'm reading the order invoice correctly.
It's still in working condition but the board has shifted up and the button is misfiring very often on a light click. This causes it to bounce into the menu and slightly pissing me off as well. One thing I noticed is that it sometimes goes into some sort of system crash. Sometimes when firing it simply stops doing so and continuously displays the sigelei logo for a good while (maybe 30 seconds?). After booting it up again after 5 clicks it operates a little differently: on button press, the resistance is briefly shown on screen in full and then it starts firing with the normal screen on display.?
Hi yzer and Jeremy.This quote was from our discussion between pages 245 to 248 where you recommended better batteries. Just an update really that I think you might be interested in. I've just bought these. Some 18650's and 18350's to replace my only batteries, my underpowered to]
PMs sent to all Sigelei users who posted on this thread during the last 8 weeks informing them of the change. I may go back further, maybe not. Whew!
Excellent. That's pretty slick.Cool yzer! It still showed right up in my subscriptions. So any past posters should see it in theirs.
We officially have a group.![]()