slightly confused.

Status
Not open for further replies.

Nazareth

Ultra Member
ECF Veteran
Jun 14, 2008
1,277
17
USA
Basically- they all get hteir products from same main manufacturer. I can tell you that the puresmoker atomizer that I got from puresmoker has outperformed my SmartFixx which is basically hte exact same hting as the njoy, and it's outlasted any SmartFixx atomizer that I have had. I'm not sure why puresmoker one is outperforming, but it's perhaps due ot fact that it's just a wee bit different than the SmartFixx, it's a little bigger around than hte SmartFixx atomizer, and perhaps holds more liquid plus has a slightly different inhale due ot hte design.
 

BigBuxNoWhammy

Senior Member
ECF Veteran
May 21, 2008
275
1
39
Canada.
Pretty much the same. My atomizer from puresmoker is a TINY bit harder to draw on but gets tons of vapor and works well. With njoy you're getting free replacements for a year, so that's basically what the extra money is for.

If you go with the njoy package, it is still much smarter to buy a spare or 2 from puresmoker or something for when you're waiting for your replacements from njoy, but esentially both ways of buying are good. One way you get the $50 pen package, with 4 or so spares, and that's going to be $100 or close. Or, you get the $100 from njoy, and over the year you will receive probably more than 4 atomizers as replacement as they go bad (I've already got 3 from them and its only been a few months), and also you can get replacement batteries, etc. So with njoy in the end I think you are getting MORE for the money over the year, but if you dont have spares waiting for your replacements will be tricky

Correct me if I'm wrong Darcy. I don't think it's stupid though :) I think both ways are ok.
 
Last edited:
well i got it and to me its lot different. the draw is easier and im getting alot more vapor. im getting throat hits that feel more like a real cig.

i tried my spare atomizer from puresmoker and it was the same as the original.

not that im downing puresmoker its a awesome product at a great price, but somthing is working better on the njoy so far at least
 

CaSHMeRe

Vaping Master
ECF Veteran
Jun 12, 2008
7,938
214
USA
well i got it and to me its lot different. the draw is easier and im getting alot more vapor. im getting throat hits that feel more like a real cig.

i tried my spare atomizer from puresmoker and it was the same as the original.

not that im downing puresmoker its a awesome product at a great price, but somthing is working better on the njoy so far at least

that's a new one ... hmmm ...

Remember, straight from the factory (supplier) is different then a day or two in to things. I would be interested to see how this plays out within the next couple of days... Factory priming may be at play :)

p.s. -- my ecig is the EXACT same ecig as NJOY. They come off the same manufacturing lines...the RN4072 is the Penstyle model # and its been rebranded about as many times as I have taken a puff of an ecig (lots) ... I just decided not to go with a fancy box or name ... that's the only difference ... lol

p.s.s -- If you're still not happy in a couple days, let me know, will take it back no questions asked :)
 

BigBuxNoWhammy

Senior Member
ECF Veteran
May 21, 2008
275
1
39
Canada.
LOL ... I actually advertise that Darcy. No 2 atomizers are exactly alike. Some are quiet, some bubble, some squeel or even whistle. Some have an easier draw than others, although they have the same amount of venting holes.


agreed. They're all dif, sometimes you gotta get used to a new one if it has a harder draw, but after 20min you get the hang of it. The squeeling noise is kinda annoying though! I had that on one of my atomizers but it went away after a day or 2 lol
 
Last edited:

phylo

Resting In Peace
ECF Veteran
Jul 25, 2008
729
7
54
Santa Cruz Ca.
In the process of testing out the atomizers before i send them out I have come accross a couple that just didnt perform how I wanted them to so I put them asside and found one that I was happy with and I knew the customer would be to.. Well today I decided to take those atomizers and give them a good cleaning, and low and behold they are perforiming way better! I think that one of the things that might be happening is that the atomizers are sitting in the factory with e-liquid in them for a little bit and then they sit on the shelf for a bit and this causes the liquid to gum up the atomizer. I am really amazed at the difference it made in them...

Here are the steps I used to clean them out.
If your atomizer starts to be difficult to draw on you might need to clean it out.
Atomizer Cleaning:
1. Soak the atomizer in a mixture of 50% warm water and 50% white distilled vinegar for approximately 1 hour. (you may want to swish the atomizer around in this solution a little to improve cleaning)
2. Rinse the Atomizer out, the best way to do that is to run warm (almost to warm to touch) tap water through the atomizer with the water entering the mouthpiece. Run water through the atomizer for a couple of minutes and then blow the atomizer out. When you blow the atomizer out plug the center hole on the bottom of the atomizer (at the battery end) with a pencil eraser and blow the water trapped in the atomizer out. (do not use any form of compressed air as this may damage the atomizer)
3. Repeat the rinsing and the blowing out of the atomizer several times.
4. Use a hair dryer set on low heat to dry out the atomizer the rest of the way.
5. Place a fresh cartridge in the atomizer and let it sit with the mouthpiece up for 20 minutes or more.(this allows some of the liquid nicotine to seep back into the atomizer so that you don’t burn it up) Or if you have e-liquid you can just add a few drops to the atomizer and let it sit for a bit.
6. Once the atomizer has been primed (there is liquid in the reservoir) you can start using it as usual.

Phil
 

katink

Ultra Member
ECF Veteran
Apr 24, 2008
1,210
4
the Netherlands
When you blow the atomizer out plug the center hole on the bottom of the atomizer (at the battery end) with a pencil eraser and blow the water trapped in the atomizer out. (do not use any form of compressed air as this may damage the atomizer)
Sorry Phylo, but this I don't understand. If you plug the hole (the only hole..) through which the water can escape, if you are blowing on the mouthpiece end yourself to get that water out... then where is the water supposed to go to, to get out of the atomizer?
 
Status
Not open for further replies.

Users who are viewing this thread