Well thats good to hear.... Darn it mines not here yet, that will teach me for waiting until Monday to order......
Special Purchase, The Kiklet by Super-T!
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
Well thats good to hear.... Darn it mines not here yet, that will teach me for waiting until Monday to order......
Don't Miss out on the special intrpductory offer on the Kiklet and Kick! These are in stock and ship in 1-2 business days.
It's a variable wattage screw on module that utilizes the Kick by Evolv.
Advantages and features:
- Allows use of the Kick on devices that don't have a sleeve or don't have room for the Kick (like many 18350 and 18500 battery equipped mods)
- Allows use on 18650 mods while retaining the 18650 battery
- Fits most any 510 threaded PV
-No removing the Kick for each battery change (and tearing the protective plastic) and then having to fiddle with it again to get it in and make a good ground. Set it and forget it!
- Almost instantaneous transfer from device to device.
- Rodium Plated contacts
- Cap accepts most any 510 atomizer, rebuildable, tank and also Ego C and Ego tank style atomizer
- Cross slotted for airflow
- Stainless steel contstruction
-All excess material milled out for maximum weight savings
Bottom view (not visible when screwed onto a PV): All Excess material milled out for maximum weight savings:[/SIZE]
Top view: Fits most all 510 atomizers, tanks, rebuildables and Ego C and Ego tanks:
Inside view:
On the PrecisePLus 18350:
Kiklet next to an IMR 18350 battery:
Kiklet on the Omega, Roller and P+18350:
Kilet on the ShockWave 26650 Mod. A FULL day of High Wattage Vaping Bliss!!
Two-Tone Kiklet on the PrecisePlus 18350:
[/QUOTE]
It's a variable wattage screw on module that utilizes the Kick by Evolv.
Advantages and features:
- Allows use of the Kick on devices that don't have a sleeve or don't have room for the Kick (like many 18350 and 18500 battery equipped mods)
- Allows use on 18650 mods while retaining the 18650 battery
- Fits most any 510 threaded PV
-No removing the Kick for each battery change (and tearing the protective plastic) and then having to fiddle with it again to get it in and make a good ground. Set it and forget it!
- Almost instantaneous transfer from device to device.
- Rodium Plated contacts
- Cap accepts most any 510 atomizer, rebuildable, tank and also Ego C and Ego tank style atomizer
- Cross slotted for airflow
- Stainless steel contstruction
-All excess material milled out for maximum weight savings
Bottom view (not visible when screwed onto a PV): All Excess material milled out for maximum weight savings:[/SIZE]
Top view: Fits most all 510 atomizers, tanks, rebuildables and Ego C and Ego tanks:
Inside view:
On the PrecisePLus 18350:
Kiklet next to an IMR 18350 battery:
Kiklet on the Omega, Roller and P+18350:
Kilet on the ShockWave 26650 Mod. A FULL day of High Wattage Vaping Bliss!!
Two-Tone Kiklet on the PrecisePlus 18350:
1 question David.. I know its not a correct fit but can I run the Kiklet on my P+16 with the AW 16340 IMR battery. Or is the 550 mah rating to low? It will go on my P+18 for the most part... I have a P+18350 waiting in my cart, seems to be a good fit for the Kiklet... Ive said it before the P+ works so well (especially with LR HH attys) that a Kick is not even needed except for the fact when the battery gets low, thats when the Kick comes into play....
Last edited:
Yes, the IMR 16340 will support the Kick amperage wise (i've load tested them over 5amps) I'm not sure about battery life though. I wouldn't expect too much battery life with that little battery.
Do you think its the battery or just not making contact? I'll try to retest one again on Monday at 4-5amps on my load tester. You may have to remind me though?! We'll see how long before it dips down to 3.3volts (the kick cutoff)
[/QUOTE]Don't Miss out on the special intrpductory offer on the Kiklet and Kick! These are in stock and ship in 1-2 business days.
It's a variable wattage screw on module that utilizes the Kick by Evolv.
Advantages and features:
- Allows use of the Kick on devices that don't have a sleeve or don't have room for the Kick (like many 18350 and 18500 battery equipped mods)
- Allows use on 18650 mods while retaining the 18650 battery
- Fits most any 510 threaded PV
-No removing the Kick for each battery change (and tearing the protective plastic) and then having to fiddle with it again to get it in and make a good ground. Set it and forget it!
- Almost instantaneous transfer from device to device.
- Rodium Plated contacts
- Cap accepts most any 510 atomizer, rebuildable, tank and also Ego C and Ego Tank style atomizer
- Cross slotted for airflow
- Stainless steel contstruction
-All excess material milled out for maximum weight savings
Bottom view (not visible when screwed onto a PV): All Excess material milled out for maximum weight savings:[/SIZE]
Top view: Fits most all 510 atomizers, tanks, rebuildables and Ego C and Ego tanks:
Inside view:
On the PrecisePLus 18350:
Kiklet next to an IMR 18350 battery:
Kiklet on the Omega, Roller and P+18350:
Kilet on the ShockWave 26650 Mod. A FULL day of High Wattage Vaping Bliss!!
Two-Tone Kiklet on the PrecisePlus 18350:
I ordered this Kick and Kicklet combo (ORder 13655 ) the day it became available and it arrived yesterday WITHOUT the Kick. It was the ultimate buzzkill... eagerly waited for a stainless steel tube that I now can't use.
I've used the contact form yesterday on the Super-T site but haven't heard anything back. Is there any other method of contacting anyone over there?
I'm not sure - it may not be making contact. I'll mess around with it some more when I get home
I ordered this Kick and Kicklet combo (ORder 13655 ) the day it became available and it arrived yesterday WITHOUT the Kick. It was the ultimate buzzkill... eagerly waited for a stainless steel tube that I now can't use.
I've used the contact form yesterday on the Super-T site but haven't heard anything back. Is there any other method of contacting anyone over there?[/QUOTE]
Buzzkill is right. I'll shoot you an email. My apologies on that.
OK - I tried this out again, making sure that the AW IMR 16340 was charged fully (it meters at 4.18 volts). When I screw the kiklet in, with the atomizer (1.4 ohm atomizer), it doesn't seem to fire. After a few more tries, I heard a rhythmic sound and held it a little closer to my ear, and it was VERY faintly "stuttering". I put a higher resisted cartomizer on it (2.7 ohms) and it still stuttered, but it was much louder.
This is the same sound I hear when I use an 18350 or 18490 and battery voltage has dropped too low.
Maybe my memory doesn't serve me well and the AW IMR 16340 can't hold above 3.3volts at 4amps. I'll retest and let you know.
My Kiklet fires fine on my brass flat top 16340. It does not fire on my slant SS 16340 with the same battery.
I've always noticed that my slant top is a little finicky at the atomizer connection; the center post must be a tad lower.
I've always noticed that my slant top is a little finicky at the atomizer connection; the center post must be a tad lower.
- Status
Similar threads
- Locked
- Locked
