Special Purchase, The Kiklet by Super-T!

Status
Not open for further replies.

snork

Vaping Master
ECF Veteran
Verified Member
May 30, 2011
6,181
11,235
CO
Here's how I feel about the Kiklet:
For the most part I love it! It has removed some of the irritations I had with the Kick, mainly the intermittent misfires I had on my PrecisePluses and having to doink around with it every time I changed batteries. Once you get the Kiklet set up the Kick might has well have been cast into a chunk of solid stainless steel it fits in there so securely.
I like my Kiklet best on my P+18650 oddly enough, the lightness of the Kiklet doesn't make it top-heavy in the least and the extra length doesn't bother me at all. Good battery life especially since I got those scratch 'n dent CGR18650CH batteries. That's a nice battery!
Putting the Kiklet on something smaller than an 18500 doesn't make much sense to me personally. If you're going small, keep it small.
The one thing I don't like about the Kiklet is the top cap. The weight-saving milling and the cross-slotting don't really apply to my needs - the deep deep well around the connection could hold a gallon of juice if I over dripped on a standard atomizer and I never use a tank which would require the slotting. So at times I have put a P+ flat top on it which works just fine (but the finish doesn't match).

And as soiuxsie said when setting up the Kiklet, liberally using Noalox means LIBERALLY. Slather it thick all over the place. Works best.

Come on, ShockWave! There's where I want my Kiklet!
 
Last edited:

vaptamist

Vaping Master
ECF Veteran
Verified Member
Oct 14, 2011
3,447
6,530
FL
I agree, I originally put my Kiklet on my P18 as an almost joke... But it hasn't left it except to test it out on other devices. I am loving this battery life, and while I wouldn't take something this large outside the house, it's become the perfect desk vape. I just leave it right next to my keyboard and it fires perfectly every time, and it's just consistently good. I can't wait for the shockwave to come out - my only complaint with the P18 is that I have to lay it on it's side, with the shockwave that wouldn't be an issue!
 

MikeK0416

Super Member
ECF Veteran
Verified Member
Jan 8, 2012
455
595
Mount Dora FL
I agree, I originally put my Kiklet on my P18 as an almost joke... But it hasn't left it except to test it out on other devices. I am loving this battery life, and while I wouldn't take something this large outside the house, it's become the perfect desk vape. I just leave it right next to my keyboard and it fires perfectly every time, and it's just consistently good. I can't wait for the shockwave to come out - my only complaint with the P18 is that I have to lay it on it's side, with the shockwave that wouldn't be an issue!

good news, sounds like a plan
 

siouxsie

Ultra Member
ECF Veteran
Verified Member
Aug 9, 2010
2,021
488
55
Minnesota
Here's how I feel about the Kiklet:
For the most part I love it! It has removed some of the irritations I had with the Kick, mainly the intermittent misfires I had on my PrecisePluses and having to doink around with it every time I changed batteries. Once you get the Kiklet set up the Kick might has well have been cast into a chunk of solid stainless steel it fits in there so securely.
I like my Kiklet best on my P+18650 oddly enough, the lightness of the Kiklet doesn't make it top-heavy in the least and the extra length doesn't bother me at all. Good battery life especially since I got those scratch 'n dent CGR18650CH batteries. That's a nice battery!
Putting the Kiklet on something smaller than an 18500 doesn't make much sense to me personally. If you're going small, keep it small.
The one thing I don't like about the Kiklet is the top cap. The weight-saving milling and the cross-slotting don't really apply to my needs - the deep deep well around the connection could hold a gallon of juice if I over dripped on a standard atomizer and I never use a tank which would require the slotting. So at times I have put a P+ flat top on it which works just fine (but the finish doesn't match).

And as soiuxsie said when setting up the Kiklet, liberally using Noalox means LIBERALLY. Slather it thick all over the place. Works best.

Come on, ShockWave! There's where I want my Kiklet!
Agree on all points. I would like a smaller cap and shorter body, maybe with minimal drip well and 510 connector only. I think the deep well is mostly a result of David's desire to make it eGo connector compatible, without adapter. As is, it would be hard to clean the juice out of the deep but narrow well. It does take an eGo atty or carto on it very nicely though, but I would rather have the height shortened.
 

CromsDog

Senior Member
ECF Veteran
Verified Member
Apr 6, 2012
143
88
47
Columbia, SC USA
I'm with you Siouxsie....the only thing keeping me from purchasing this awesome device is the length. I recently purchased a P+500 to replace my +650 as my all day carry. It was just a bit too long for my taste. 106mm leaves a good chunk of steel above my hand before my tank starts and I kind of feel like I'm wielding a wand. With that being said, I've looked long and hard at this Kiklet and decided that for now, in this iteration, its not for me. The idea is great and from what I read it performs like you'd expect from Super T. Unfortunately it will add about 42mm to your device. Even if I went down to a +350 I'd still be rocking a 116mm device BEFORE the tank. Holy crap that's a big ole stick. I'm hoping Dave gives us a similar device with threads that screw directly into the top of a P+ tube. I'd also prefer just the new style P+ top cap over the Kiklet style. Or, and I'm spit balling here, leave the top off all togethor cause we could use our existing to save money and production cost. This will hopefully bring it down to a respectable 20mm or so addition to your tube. So a 74mm P+350 will then end up around 94mm, just a tad larger than my current +500. That's my hope anyway.

CD
 
Last edited:

vaptamist

Vaping Master
ECF Veteran
Verified Member
Oct 14, 2011
3,447
6,530
FL
I use mine with the 18650 P+500 and the box mod. The 18650 is for at home on the couch use and the 18500 for home and car.
Get great looks in the car hehe. The box mod is just for eveywhere and I was suprised how much I like it on that. All in all I am very happywith the Kiklet.:)

If I see another guy with a super-t baton in traffic, we will have to do battle.

THERE CAN BE ONLY ONE

q4Vr9.jpg
 

aziffel

Vaping Master
ECF Veteran
Verified Member
Nov 10, 2010
4,692
3,326
nc
If I see another guy with a super-t baton in traffic, we will have to do battle.

THERE CAN BE ONLY ONE

q4Vr9.jpg
Baton?...I'll show you a baton,I don't know if my crappy skills as a photographer and my camera can back up far enough to get the whole thing in the shot.I'll try in a bit.
P+650,kiklet(gotta be a better name)G Tank US 5ml.I bet its dam near a foot long!

Will not happen anytime soon:)

<<<<<<<--------------------------------Most of the time I use the flying saucer:toast:

Hahahahaha
 

vaptamist

Vaping Master
ECF Veteran
Verified Member
Oct 14, 2011
3,447
6,530
FL
Baton?...I'll show you a baton,I don't know if my crappy skills as a photographer and my camera can back up far enough to get the whole thing in the shot.I'll try in a bit.
P+650,kiklet(gotta be a better name)G Tank US 5ml.I bet its dam near a foot long!



Hahahahaha

I can beat that! Just wait til I get home!
 

snork

Vaping Master
ECF Veteran
Verified Member
May 30, 2011
6,181
11,235
CO
Oy.
No.
I lost track.

Actually it's this:
P+, Kiklet, some strange 510 GG connector thing, top tube, top tube, AD/CT, Ody.
In all fairness the pictured unit doesn't vape, but I have assembled similar in the past which did. It involves running a piece of NR wire up through the toptubes connecting the 510 connector's positive with the positive of the AD/CT.

I hate it. It's gone already.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread