Squape Reloaded Clone
- Thread starter yungstu
- Start date
- th_trl_thread_readers 0
- Status
Here's one person's opinion on the V3: http://www.e-cigarette-forum.com/fo...focalecig-new-fasttech-1230.html#post14425940
Probably be better off getting a proper stumpy kit: $14.55 Stumpy Kit for Rose Atomizer by Pallas
This item is stocked in their US warehouse, so you'd get it pretty quickly.
Probably be better off getting a proper stumpy kit: $14.55 Stumpy Kit for Rose Atomizer by Pallas
This item is stocked in their US warehouse, so you'd get it pretty quickly.
Last edited:
I have the Rose Stumpy kit by Pallas and it fits the original Rose2 as well as the Pallas Rose2 clone from focalecig (silver box). Reduces atty height by 14mm but they say juice capacity is only cut by 0.2 ml. The kit comes with a metal and a plastic tank midsection. Works good and makes the big Rose2 less top-heavy on a mod.
I admit I wasn't interested in the v3 Rose. The v2 is my favorite atty. No fancy builds on mine, but great vapes.
One has the single, diagonal build and the other has duals.
One has the single, diagonal build and the other has duals.
Returned my "Satin" POS/SR with PMMA to FT yesterday. They use a USA "drop box". Sent them a pic of my shipping receipt in my ticket and this AM they had already credited my PayPal account for my shipping charges. I figure about 3 or 4 weeks until the balance of the funds are credited to my PayPal account.
Next Victim!!!!!!! A Squape R by Kingtu ordered from our NBF @poolprousa which I should have the end of this week. Will report to my beloved "tribe" /lol Anyone have one yet and can report?
Next Victim!!!!!!! A Squape R by Kingtu ordered from our NBF @poolprousa
which I should have the end of this week. Will report to my beloved "tribe" /lol Anyone have one yet and can report?
Returned my "Satin" POS/SR with PMMA to FT yesterday. They use a USA "drop box". Sent them a pic of my shipping receipt in my ticket and this AM they had already credited my PayPal account for my shipping charges. I figure about 3 or 4 weeks until the balance of the funds are credited to my PayPal account.
Next Victim!!!!!!! A Squape R by Kingtu ordered from our NBF @poolprousa
I received mine yesterday. No problems with the 510 pin, but mine did leak at the windows. Tried to reseat the glass but it cracked on me. Also came with a spare glass tube. Also cracked when trying to install it. I think the o-rings that are used are a touch too big. Hopefully you will have better luck.
O brother....sorry to hear this. I would send @poolprousa an email. I could certainly be wrong but I thought the Ebay listing guaranteed no leaks?? Again, I'm not trying to start a war but your experience concerns me. Certainly could have been a one of incidence. I pray to the Gods I do not return to H E L L /lol First test I'm going to run after a very very thorough cleaning is fill with water upside down and pray and see what happens. Mark???
Oops! I didn't order one with him, but a different seller. Still a kingtu clone with o-rings for the glass. If I remember correctly he is the seller who was testing them before shipping.....I'm sure yours will be fine.
OK that's VERY helpful. Yea, I saw his post on "the dark side" forum where he DID test rather extensively with his batch/order and THAT is a good thing. So I'm no longer that worried about a trip back to H E L L BUT I'm still going to test. Who was the seller for your SR?
A seller from Ebay. Its actually really nice. No wobbly deck, posts were tight, 510 connection is just fine. Trying to adjust the glass however was just impossible for me.
Just got my SQr clone from the Kingtu factory and right away, I didn't like what I saw. One pole was unscrewed and just laying on the subdeck. The other pole was screwed on but in the wrong hole. There were some deep scratches on the surface of the subdeck. Hope you can see the scratches in the pic. Seems whoever was supposed to assemble the base couldn't press the subdeck in and tried to hammer it in with a screwdriver. I really don't think the people at Kingtu know what they are doing. Look at the deck screws. No way is a wire going to stay screwed on with those post screws. The parts are nearly dry now but I don't even feel like putting it together until I find some flat bottomed post screws. Right now I'm too ...... that I wasted my time and money dealing with those clowns at Kingtu.
edit: those screws aren't even the right size! too small
edit: those screws aren't even the right size! too small
Last edited:
I'll have to double check but I'm sure that my post screws are flat at the base. Why so many differences with the same manufacture? You would think they use the same parts for each one they assemble.
@Pete - What an absolute POS!!! I don't blame you! This site will be your friend at SHOP - FatDaddyVapes.com - Home of the best vape tweaks and replacement hardware.
I'm not even a friggin Modder but I continue to collect his stuff. Reliable and fast shipping!
Good luck!
I'm not even a friggin Modder but I continue to collect his stuff. Reliable and fast shipping!
Good luck!
My Ivogo takes M3 screws. I don't think FDV has them.
Well, so much for the Kingtu Chuckie is finally chucking out good flavor so if I could find a good clone I would buy it.
Well, so much for the Kingtu
Chuckie is finally chucking out good flavor so if I could find a good clone I would buy it.
Finally got the SQr working with a 1.2 ohm coil and rayon wick. Luckily I had some spare deck screws from my original SQr. But something is wrong with the 510 pin. Any pressure on the pin and resistance jumps all over the place. Ohms are stable now but I have to handle this atty very gingerly or it's liable to go nuts again. Just leaving the air adjustment alone because I'm scared to disturb this delicate balance if I unscrew to adjust.
Just got my SQr clone from the Kingtu factory and right away, I didn't like what I saw. One pole was unscrewed and just laying on the subdeck. The other pole was screwed on but in the wrong hole. There were some deep scratches on the surface of the subdeck. Hope you can see the scratches in the pic. Seems whoever was supposed to assemble the base couldn't press the subdeck in and tried to hammer it in with a screwdriver. I really don't think the people at Kingtu know what they are doing. Look at the deck screws. No way is a wire going to stay screwed on with those post screws. The parts are nearly dry now but I don't even feel like putting it together until I find some flat bottomed post screws. Right now I'm too ...... that I wasted my time and money dealing with those clowns at Kingtu.
edit: those screws aren't even the right size! too small
With my crappy run of luck I didn't want to say anything but I got mine last night and guess what, ME TOO!
I told myself I'd wait to get one until I was confident all the issues were ironed out. I held out for pretty long considering how much I've been wanting one of these. If Statt Qualm was able to actually produce units I'd buy an authentic without hesitation. I heard the Kingtu version might be the one to get. So I decide to gamble and jump on one before they become hard to find (with all the trademark infringement going on with this clone). And then I find this out 
Great. Knew I should have just waited patiently either for an authentic or until the clones were smooth sailing. Lol. Oh well, here's to hoping that the one coming to me isn't another dud. Whats with the SqR that makes it so difficult to get right? Its definitely more elaborate than a typical RTA, but no more elaborate in my opinion than a Rose v2, and the cloners did an excellent job with that.
Great. Knew I should have just waited patiently either for an authentic or until the clones were smooth sailing. Lol. Oh well, here's to hoping that the one coming to me isn't another dud. Whats with the SqR that makes it so difficult to get right? Its definitely more elaborate than a typical RTA, but no more elaborate in my opinion than a Rose v2, and the cloners did an excellent job with that.
Last edited:
The EHPRO SR is good right? No issues, just only one deck but they will be releasing the other 2 soon from my understanding.
- Status
Similar threads
