Getting the tips is not much of a problem, it's the cap that's tough, just about have to buy with the bottle and all. Cloud 9
Svoë Mesto Kayfun III ES Discussion/Questions
- Thread starter BoyNamedStacy
- Start date
- th_trl_thread_readers 0
- Status
I'm still having wicking issues. My wick is roughly 1 inch long, and gently poked down into the base, and I've switched from 30g to 34g wire, which helps, but it's still not quite what I think it should be.
I'm surprised your having wicking issues this thing wicks new efficiently than any atty I've owned
Are you perhaps wrapping the wire too tightly on the wick?
And if your using the supplied wick try another type of silica.
Last edited:
I get very hatsh hits outta my kayfun. Using 32 gauge 4 wrap with 3.5 mm any tips?
Sent from my GT-P7310 using Tapatalk 2
Sent from my GT-P7310 using Tapatalk 2
Anyone know of a spot in the US that has various sizes of ekowool? or just a vendor that is open for business that I can buy some lol
Now i just need to know when will more of the 3.1 be on sale?Or if your not happy with 1 give me a pm i have the $
This worked. I don't think I was using enough wick or something. Thanks.
EDIT: still not consistent
Last edited:
I've been purchasing my ekowool from Europe. I don't know that anyone in the US is carrying it yet.
Here's what I worked the problem out to be. If you tuck the wick down and put too sharp a bend in the silica by the terminal it won't wick. Tuck the wick from the loose end and avoid kinking the wick. Started with a dry wick, filled the tank, and after a few light silica tasting vapes, I'm getting nice vapor so I think that means it's wicking...
This method will also give you wick ends that sort of arch up and have the ends dipping into the side pockets next to the channels.
This method will also give you wick ends that sort of arch up and have the ends dipping into the side pockets next to the channels.
Last edited:
It is a different vape then gennies for sure, longer drags and higher ohm seems to work better for me now. Need to tinker some more to see if I can go in the lower ohm range. Variables have to all match. For now I use 2 mm ekowool, tripple folded, 30 AWG, 4 wraps and it is 1.5 ohm. No dry hits what so ever. Will use this setup for a little while and then dive into the lower ohm range to find a good setup that can keep up with the heat.
I'm running a 3mm regular silica tripled over with 30 gauge kanthal for 1.5 ohms. The loops on the wick are just long enough to dip into the side chambers where the juice channels are---working fantasitc in my mini right now after some initial priming by covering the air hole and sucking. seems to be working even better after having sit overnight. Looking forward to getting some ekowool in from cloud nine to try out.
I'm getting dry hitsThere doesn't seem to be any pressure equalization. If I unscrew the cap a little and let bubbles come up it will work as expected for a little, then back to dry hits.
Stiffen the draw with the adjuster screw...you must be too airy.
Remember the adjustment screw doesnt retain its setting if you carry it around,got to readjust from time-to-time
Best is to triple it in fact...piece of wick is 5 inches long...dont even attempt to skimp on this,its required.
Last edited:
BTW,diff. parts for the battery packs to complement the 3.1 ES are being made as we speak
Stay on your toes,something tells me that you all need a complete kit to really enjoy your Kayfuns and laughing at all the crap you bought previously
Stay on your toes,something tells me that you all need a complete kit to really enjoy your Kayfuns and laughing at all the crap you bought previously
- Status
Similar threads
