Svoë Mesto Kayfun III ES Discussion/Questions

[hippieben]

This is very easily the best atomizer I've owned. I just wish I didn't drop my provari with a heavy ... terminator on it and bent the connection Hopefully the arrival of a provari ring will straighten things out .

 

[emonty]

that ring you should get any day now, hopefully Eastern will not interfere

 

[tricci]

BTW,diff. parts for the battery packs to complement the 3.1 ES are being made as we speak

Stay on your toes,something tells me that you all need a complete kit to really enjoy your Kayfuns and laughing at all the crap you bought previously

Ooh??? Do you have any guesses on when and where they'll be released?

 

[speedemon]

Anyone here when they might put more up for sale on sight?I have a add in the wanted but another one sold come on all read the want adds before you put 4sale thats what i like to do helps out others with wants plus easier to sell and get a deal done.

 

[tim_man]

If anyone is interested in the Ithaka, it is available at Cloudsofvapor.com. Better hurry before it's sold out

Looking forward to comparing the kayfun 3.1, if I ever get it in lol

 

[emonty]

not interested, it will be buggy for sure!

 

[tim_man]

not interested, it will be buggy for sure!

Lol, hope it's not. Supposed to be an improved Odysseus

 

[emonty]

I know it is....what and see

 

[hippieben]

Lol, hope it's not. Supposed to be an improved Odysseus

If I remember correctly it's actually supposed to go back to the iAtty principles but without all the stupid plastic bits. Nope, I lied.

Also, I think I may have gotten the wick and coil method down and will probably throw up a video this weekend if things hold well for anyone having issues. She's a very particular lady on the inside.

And, what the hell....

I've also managed to drop the damn thing already. Went to class wearing sweat pants, got up, and plunk went rolling down the lecture room floor. Not a mark on her tho, just some very very slight scuffing that's no more noticeable than the slight damage that was done in shipping.

 

[martinc]

well,I prefer the look of the IIIES better,and the coveniency of the 2.0 over the IIIES (knurling at all manipulation points) but the decorative ring willd efinitely help there,reinforcing the whole thing

 

[Neofolis]

Got my first Kayfun on Tuesday, it's a 3.1ES and I'm running a 0.8ohm ribbon kanthal coil, just because that's how I like my gennies. After filling I found it wasn't wicking well, so I was having to unscrew the top a little to let some air in at which point it became slightly flooded for a drag or two, then vaped fine for a bit until it ran dry again. I figured I didn't have the wicks poked down far enough, but after the first quarter of a tank had gone it started wicking fine, maybe the weight of the juice in the wicks helped them move a little lower in the chamber, either way, it's been wicking fine since. I'm not getting the awesome flavour that most people have mentioned, but it's in no way bad and it's my first build, so there's bound to be room for improvement. Overall I'm quite impressed and it's nice to be enjoying something that doesn't leak when it's not upright.

 

[tim_man]

It takes some time to get the build correct, but when it's right, the flavor is outstanding.

Got my first Kayfun on Tuesday, it's a 3.1ES and I'm running a 0.8ohm ribbon kanthal coil, just because that's how I like my gennies. After filling I found it wasn't wicking well, so I was having to unscrew the top a little to let some air in at which point it became slightly flooded for a drag or two, then vaped fine for a bit until it ran dry again. I figured I didn't have the wicks poked down far enough, but after the first quarter of a tank had gone it started wicking fine, maybe the weight of the juice in the wicks helped them move a little lower in the chamber, either way, it's been wicking fine since. I'm not getting the awesome flavour that most people have mentioned, but it's in no way bad and it's my first build, so there's bound to be room for improvement. Overall I'm quite impressed and it's nice to be enjoying something that doesn't leak when it's not upright.

 

[hippieben]

Tim, or someone else who has this working perfectly, can you post a picture of your wick? I'm looking to see what angle you have the coil running over the air hole. I moved it to about 45° and it seems to be working better.

 

[tim_man]

I'll post something later tonight. Still learning like everyone else, but this latest build seems to be working well in the mini

 

[martinc]

My coils are directly over the hole right across the 2 screws...its the right way.

Adjust your draw,it gets more or less juice in,this will change vapor prod and taste like you wont believe.

 

[tim_man]

setup in mini. This setup seems to work pretty good. A little gunk build up after about 6 ml of juice, but has given excellent flavor. Dry burn cleaned it up just right.

3mm standard silica wick, 30 gauge kanthal 1.5 ohms vaping at 4/3.9 volts or 10.-10.7 watts---wick fits in the side area next to juice channels.

 

[dakrido]

muted issue sorted out, this unit rocks!!!!!

Hi emonty,
What was the problem?


Envoyé de mon iPad à l'aide de Tapatalk

 

[martinc]

I used to dry burn 2-3x my wicks but not anymore...at the price it cost,I just build a dozen at a time and flip them on after 2 tanks

 

[hippieben]

Seems to work better filling by the "classic" method, much quicker too. Just fill it, leave a little gap, then flip it up side down when putting the top cap on. Might end up with a little juice in the collector tank, but only when you've put too much in or wait too long before capping it. Fill valve seems to cause strange pressure.

 

[emonty]

Hi emonty,
What was the problem?


Envoyé de mon iPad à l'aide de Tapatalk

Adjustments of wick, amount, coils and air intake did the trick. Watched numerous video's and applied all the tips and tricks.