SXK Billet box...

[dwcraig1]

USPS says my Bantam will be here this coming Wednesday. Some of those little ceramic coils and bridge are in the order as well. I plan on trying some flat wire in the included Kanger style rba. My flat wire is Nichrome and the Bantam to my disappointment doesn't do TC.
It should be a bit of a challenge perhaps to mount the flat wire coils for me.

 

[Fredman1]

You'll need to unscrew the 510 key fire the mod and screw the key back down again to reset the resistance. Then do a very quick pulse in wattage mode to set the resistance, switch to a SS profile and try it again to see if it goes to OFF mode.

Fantastic. Well laid out. I'll play with that. Thanks mate

USPS says my Bantam will be here this coming Wednesday. Some of those little ceramic coils and bridge are in the order as well. I plan on trying some flat wire in the included Kanger style RBA. My flat wire is Nichrome and the Bantam to my disappointment doesn't do TC.
It should be a bit of a challenge perhaps to mount the flat wire coils for me.

That's good to hear. Plz let us know how you find the Bantam.
You'll be right with the flat wire. Pop em in and tighten them up. I sometimes get worried to, but every time so far it aligned itself when tightened.

 

[charlie1465]

If it's a connection problem between the positive and the bridge try a small washer around the key and see if that helps

Good explanation @TrollDragon

 

[Armor1]

I need help finding a link for ultem buttons for my sxk BB box...BB vapes sell the whole kit but not the buttons alone, and they're always out of stock...

Sent from my LGMS550 using Tapatalk

ProVapes in the UK has them

 

[dwcraig1]

My Bantam got delayed some how but will be here tomorrow, it's near by now.

 

[Armor1]

I wouldn't bet on it. All four of my SXK BB use the same threads as the OG. Although there are some OG that isn't the same. I've been trying to figure out which ones isn't. So far I had no luck figuring it out.

Wondering if the difference is between the SXK DNA 60 and their 70 which isn’t a dna.

 

[b.m.]

Been vaping on the Billet box for a few days now,and i'm pretty sure i'm hooked haha,Sorry @charlie1465 no dibs on this one haha,i think it's a keeper.
I started out with the EC-M coil in it,and wasn't sure at first if i liked it or not.Flavor was kinda meh,and the airflow wasn't near what i like.After the first tank full,then the flavor got better,so i took the condensation plug out and opened it up more,it was originally only a 3mm hole,so i made it much more open,and now i love this mod,and will definitely be getting another.
I have the Vape shell in it now with a SS flat wire coil at .37 ohms and it is fantastic.
I ordered a brass JMK busto+ this morning to match my brass button,should have the drip tip here in a few days.
Does anyone know if there are any flush mount keys that will fit the SXK?The ones i've seen are close to $40 and i don't want to spend that much to take a chance if it will fit.

 

[Fredman1]

so i took the condensation plug out and opened it up more,it was originally only a 3mm hole,so i made it much more open,

Condensation plug is a first for me. Where exactly is that?

 

[b.m.]

Condensation plug is a first for me. Where exactly is that?

It's a separate piece to buy,it goes under the tank to keep condensation and juice from running down onto the board.I've also seen them called dampness plugs.

 

[b.m.]

Here is what they look like.
Billet Box Anti-condensation AFC MTL - SnV Mods | Billet Box Access...

 

[charlie1465]

Been vaping on the Billet box for a few days now,and i'm pretty sure i'm hooked haha,Sorry @charlie1465 no dibs on this one haha,i think it's a keeper.
I started out with the EC-M coil in it,and wasn't sure at first if i liked it or not.Flavor was kinda meh,and the airflow wasn't near what i like.After the first tank full,then the flavor got better,so i took the condensation plug out and opened it up more,it was originally only a 3mm hole,so i made it much more open,and now i love this mod,and will definitely be getting another.
I have the Vape shell in it now with a SS flat wire coil at .37 ohms and it is fantastic.
I ordered a brass JMK busto+ this morning to match my brass button,should have the drip tip here in a few days.
Does anyone know if there are any flush mount keys that will fit the SXK?The ones i've seen are close to $40 and i don't want to spend that much to take a chance if it will fit.

Well the BB gets another one....they told me that the billet box was all i'd ever need. One's all you'll ever need they said and now I have 4 and a Bantam

The flush fits are only made for the OG. I can't tell you for sure about fit because there seems to be a confusing story about that. Originally, the first SXK threads were different so the Tips, flush fits etc didn't fit. Then they seem to have sorted that on the later runs. No one can give you a definitive yes that will be alright answer....it's why I haven't bought a flush fit yet too

I think you can get one a little cheaper than 40 though...

Billet Box Flush Fit 510 Adapter - K&R Vapour | Billet Box Accessor...

Really happy you're enjoying the vapeshell it is good isn't it? There's something about the BB it's form factor the quality of the vape...it all comes together in one fantastic little package..

Welcome to the BB addiction

 

[charlie1465]

Condensation plug is a first for me. Where exactly is that?

Here's another option too...

Billet Box Anti-condensation AFC MTL - SnV Mods | Billet Box Access...

 

[Nailz]

Here's another option too...

Billet Box Anti-condensation AFC MTL - SnV Mods | Billet Box Access...

I ordered some from ebay this week - Billet Box Rev4 SKD Condensation Plug PLUGZ Set (3) MTL DL Hybrid ports | eBay

They was meant to be here today, but USPS couldn't get to my door today, even though they arrived in my city yesterday

I already have these ones - https://www.amazon.com/gp/product/B074GP8X9G/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 but not a fan of them, as sometimes fall out when take cover off to fill, and then have to find them on the floor.

 

[Armor1]

I wouldn't bet on it. All four of my SXK BB use the same threads as the OG. Although there are some OG that isn't the same. I've been trying to figure out which ones isn't. So far I had no luck figuring it out.

It would be cool if you could measure threads of each. It could give a guide of what people have.

 

[chanelvaps]

Someone on here posted a link for some Vaporesso's with sleeve. It was 2-3 weeks ago. I bought some and I'll be darned if they did not come with the sleeve.
Any idea who that was or where it was from. I have the envelope it cam in but all it says is a bunch of Chinese addy's and such. No such name as I know I ordered from and I cannot, for the life of me, remember where it was.

 

[Armor1]

Someone on here posted a link for some Vaporesso's with sleeve. It was 2-3 weeks ago. I bought some and I'll be darned if they did not come with the sleeve.
Any idea who that was or where it was from. I have the envelope it cam in but all it says is a bunch of Chinese addy's and such. No such name as I know I ordered from and I cannot, for the life of me, remember where it was.

I’ve been looking also. Don’t have my BB yet but getting prepared. Always liked the vape from the Vaporesso coils.

 

[b.m.]

Someone on here posted a link for some Vaporesso's with sleeve. It was 2-3 weeks ago. I bought some and I'll be darned if they did not come with the sleeve.
Any idea who that was or where it was from. I have the envelope it cam in but all it says is a bunch of Chinese addy's and such. No such name as I know I ordered from and I cannot, for the life of me, remember where it was.

I posted it a few weeks back,the site i got mine from and posted the link to is Urvapin.Definitely contact them,as the listing says with sleeve,and mine had it with them.

 

[b.m.]

I ordered some from ebay this week - Billet Box Rev4 SKD Condensation Plug PLUGZ Set (3) MTL DL Hybrid ports | eBay

They was meant to be here today, but USPS couldn't get to my door today, even though they arrived in my city yesterday

That's the ones i got,they are nice,they fit good and snug to the bottom of the tank and don't fall off if you take the tank out.

 

[dwcraig1]

chanelvaps' post reminded me of this. These coils look like they might work with the SXK coils/bridge for the Bantam but according to a poster over on the FT forum they don't. Here's pics of both. (Drizzle coils vs SXK Bantam coils)

 

[charlie1465]

chanelvaps' post reminded me of this. These coils look like they might work with the SXK coils/bridge for the Bantam but according to a poster over on the FT forum they don't. Here's pics of both. (Drizzle coils vs SXK Bantam coils)

No Craig...the bridge you've got there takes the drizzle coils or the new sxk coils made for it. It takes a few other types as well but I'd have to look through some stuff to be more informative.

The vaporesso EUC coils fit in the A-tank if you've got the special sleeve with the standard bridge kit which come with the SXK one. To fit them in the standard boro you need the Mod Factory bridge....there are other bridges too but this is the original.

Most BB users swear by the MF bridge with the EUC ceramic coils in 0.5/0.6. They give a really good flavour.

The new SXK coils which came out for the Bantam look interesting although probably MTL the resistance at 1.2 ohm is certainly where you'll need to be with an 18350 battery.

Hope this clarifies and let me know if I can get you further details