SXK Billet box...

[badinfluence357]

As you guys can see the orange one is my favorite.. It kind of looks like a window case. The glass and see-through orange borrow blend in really well...Im digging that lil bulb driptip too, works really well with the Atom rda. It's funny because fasttech sent me the Atom instead of Bridge'D by mistake..The Bridge'D has flooded out a couple times from over filling, thank god I seald my BBs from the outside.

Sent from my SM-A526U using Tapatalk

 

[Pigs]

As you guys can see the orange one is my favorite.. It kind of looks like a window case. The glass and see-through orange borrow blend in really well...Im digging that lil bulb driptip too, works really well with the Atom rda. It's funny because fasttech sent me the Atom instead of Bridge'D by mistake..The Bridge'D has flooded out a couple times from over filling, thank god I seald my BBs from the outside.View attachment 970424View attachment 970425

Sent from my SM-A526U using Tapatalk

How do you like the Atom?

 

[Fredman1]

How do you like the Atom?

Taking the words right out my mouth. After a bit of a lay off, i'm on the bridge hunt lately...bit behind the ball

 

[Fredman1]

Just bought me the SXK Ceo bridge. Smoother than the Orbit and awesome flavor according to Grimm....we'll see.
Not sure what to make of the side airflow though. I'm of the opinion you can't beat bottom airflow.

 

[badinfluence357]

Im liking the Atom so far. I'm digging the flavor Im getting from it and its wicking nicely in dl mode....

Sent from my SM-A526U using Tapatalk

 

[Fredman1]

The game is changing

 

[Pigs]

I just got the 5Avape clone of the Dope rba. The machining is flawless. I've had the SXK version for a while now - it's also a good quality clone but maybe not as pristine as the 5A.

I've been running a 3mmID fused clapton in the SXK and a 2.5mm in the 5A.
I'd recommend the 2.5. With the largest bore (3mm) af pin in both, the draw is smoother and noticeably more open with the smaller coil. Flavour great both ways.

One thing I dont like about the very flat layout of the deck is that the coil legs hover extremely close to the deck. I haven't had a short but it must be a possibility.

 

[borno]

I just got the 5Avape clone of the Dope rba. The machining is flawless. I've had the SXK version for a while now - it's also a good quality clone but maybe not as pristine as the 5A.

I've been running a 3mmID fused clapton in the SXK and a 2.5mm in the 5A.
I'd recommend the 2.5. With the largest bore (3mm) af pin in both, the draw is smoother and noticeably more open with the smaller coil. Flavour great both ways.

One thing I dont like about the very flat layout of the deck is that the coil legs hover extremely close to the deck. I haven't had a short but it must be a possibility.

I've been bending up the coil legs with a little screwdriver, as I thought the same thing about shorting.

 

[Pigs]

I've been bending up the coil legs with a little screwdriver, as I thought the same thing about shorting.

Goodi idea.

 

[Pigs]

I might try my next build with legs up too.

 

[b.m.]

I just got the 5Avape clone of the Dope rba. The machining is flawless. I've had the SXK version for a while now - it's also a good quality clone but maybe not as pristine as the 5A.

I've been running a 3mmID fused clapton in the SXK and a 2.5mm in the 5A.
I'd recommend the 2.5. With the largest bore (3mm) af pin in both, the draw is smoother and noticeably more open with the smaller coil. Flavour great both ways.

One thing I dont like about the very flat layout of the deck is that the coil legs hover extremely close to the deck. I haven't had a short but it must be a possibility.

I got the 5A one too,right after it came out,SXK hadn't released one at that time yet.I was honestly disappointed because I had never heard of 5A and almost didn't buy it haha.After getting it,I was surprised by how nicely done it was,after using it a few days,I seen SXK had released one,but bought another 5A anyway, they are very well made.

 

[AtmoMarios]

Hello everybody, I've been following this thread for some time and after all the advice I bought a BB dna60 last year, I just got a Bantam Box revision from FT and I wanted to ask if anybody knows what kind of coils is the one that comes with it? It comes with 2 one of which is a nautilus the other one just says MTL 1ohm and also if you guys know if I can use any bridge like the Exocet V2 that I already have in any of these 2 tanks
Thank you

 

[borno]

Hello everybody, I've been following this thread for some time and after all the advice I bought a BB dna60 last year, I just got a Bantam Box revision from FT and I wanted to ask if anybody knows what kind of coils is the one that comes with it? It comes with 2 one of which is a nautilus the other one just says MTL 1ohm and also if you guys know if I can use any bridge like the Exocet V2 that I already have in any of these 2 tanks
Thank you

The other coil is the same as a smok rpm coil and the tank for the nautilus bridge I have a dope rba in mine.

 

[AtmoMarios]

The other coil is the same as a smok rpm coil and the tank for the nautilus bridge I have a dope rba in mine.

Thank you! I guess that tank is only for stock coils? also good to know you can use the dope rba with the other tank as I'm planning to get one, I vape mtl and i hear good things for the dope
Thanks again

 

[ShowMeTwice]

The game is changing

FWIW... the Atmizoo SnailTank has been receiving excellent reviews from users in the Atmizoo FB group. For a while it was only being sold via the group.

The SnailTank went on sale to the public yesterday (Friday, March 18th 2022). Some of the colors have been selling out quickly as well as the set. Atmizoo will "replenish stock at various times each day".

€19.84 for one and €79.36 for the set (all five colors).

 

[dwcraig1]

I watched this yesterday and it drove me nuts.
Is there a good reason why he didn't use an ohm meter on the boro set up?
Why not show folks how to find problems like this?

Perhaps I'm just expecting too much.

 

[Fredman1]

I watched this yesterday and it drove me nuts.
Is there a good reason why he didn't use an ohm meter on the boro set up?
Why not show folks how to find problems like this?

Perhaps I'm just expecting too much.

Its got to that stage now that I just can't watch this creep anymore. I really spent to much of my time giving him the benefit of my doubt....

 

[b.m.]

I watched this yesterday and it drove me nuts.
Is there a good reason why he didn't use an ohm meter on the boro set up?
Why not show folks how to find problems like this?

Perhaps I'm just expecting too much.

Because he's all about drama.If he actually tried to figure out the issue,he wouldn't have a reason to act like a fool.It has already been acknowledged by the owner of Voltrove that some of them may have issues,and he is working to solve it.I have 5 of them,and no issues with any of them.

 

[badinfluence357]

I just lightly scratch the bottom of positive pin with some sandpaper and it fixes that check atty error.. I have gotten that check atty error with multiple new bridges...

I honestly think It might have something to do with the finish and polishing.. I get it, when you buy an item it should work right out the box. The buyers shouldn't have to mod hop and troubleshoot to try and figure out why it dosnt work on five different mods.

These are QC issues that should be addressed and taken care of before the products are distributed and sold.

Sent from my SM-A526U using Tapatalk

 

[Pigs]

Its got to that stage now that I just can't watch this creep anymore. I really spent to much of my time giving him the benefit of my doubt....

You're more forgiving than me. I've never given him the benefit of the doubt. He's a jerk.