I've been lurking here for a while. Just ordered one to see how it compares to a DNA40.
SXmini M Class (TEMP CONTROL)
- Thread starter whitewidows
- Start date
- th_trl_thread_readers 0
- Status
I've been lurking here for a while. Just ordered one to see how it compares to a DNA40.
Has anyone else had problems getting in touch with Varitube? I have tried to contact them three times over the past few weeks and have gotten no response. I would really like to get in touch with them...my M-Class isn't working properly...
I've been lurking here for a while. Just ordered one to see how it compares to a DNA40.
Look forward to your comparison KTM
I can guess the ending though
Not owning a dna40 mod as was hanging on for a trouble free one .... I ended up waiting so long the M class came out
Am one happy bunny though
Works so well I bought a second & likely wont be getting anything else until Yihi release the SX350 V250 with colour TFT screen
Kenho,
What kind of problems are you having? Maybe we can fix the problem faster than you can get ahold of the vendor.
Sunday satisfaction
I have 6 DNA40 mods. 3 I built (2 Cloupor boxes, 1 Hana mini clone box with 18650) and 3 I bought (VS rDNA40, VS DNA40, Hana V4). I've had my rDNA40 the longest (Nov '14) and the only issue I've had with a DNA40 is my Hana V4 where the screen glitches while firing. It resets when you release the fire button and it has no affect on the vape so it's really not an issue. No other issues on any of my DNA40 mods.Look forward to your comparison KTM
I can guess the ending though
Not owning a dna40 mod as was hanging on for a trouble free one .... I ended up waiting so long the M class came out
Am one happy bunny though
Works so well I bought a second & likely wont be getting anything else until Yihi release the SX350 V250 with colour TFT screen
I'm definitely getting a DNA200 when it's released (most likely the Vaporshark version) but I know the wait will kill me
lol and Breazy.com has a 30% off site wide sale (code: 30off) so I bought one on impulse. I guess Breazy is in NJ so I got dinged with tax but $150 is still way better than $200. I still don't like Yihi's draconian retail rules (free market and all) so I was hesitant to buy. I've watched tons of review videos and read up on the mod so I'm well prepared when it shows up. I look forward to playing with it.
I have 6 DNA40 mods. 3 I built (2 Cloupor boxes, 1 Hana mini clone box with 18650) and 3 I bought (VS rDNA40, VS DNA40, Hana V4). I've had my rDNA40 the longest (Nov '14) and the only issue I've had with a DNA40 is my Hana V4 where the screen glitches while firing. It resets when you release the fire button and it has no affect on the vape so it's really not an issue. No other issues on any of my DNA40 mods.
I'm definitely getting a DNA200 when it's released (most likely the Vaporshark version) but I know the wait will kill me
I've watched tons of review videos and read up on the mod so I'm well prepared when it shows up. I look forward to playing with it.
Was reading earlier about the 200w vaporshark on their facebook page
The bit that stood out in VS replys to questions was its a little taller than current VS but narrower too
Comments where then being made that a 22mm atty will overhang the sides of the mod
Worth checking out if this would be an issue to a buyer
Meh. Doesn't bother me
.I'm more into function over form. What bothers me and why I was building my own was because I couldn't find a mod with a reliable spring loaded 510 in a small form factor and 18650 battery. That's why I got the rDNA40 and recently the DNA40. The Hana V4 is cool but boxy and kinda weird to hold. The fire button is a huge improvement though as is the battery door on the bottom.
A sharkskin will make up the difference on the sides. Same issue with the DNA30 where 22mm atomizers overhang just a bit but perfect when using a sharkskin. Looking at my DNA40 just now, it also has a very slight overhang but looks fine with a sharkskin.
No problems here. I used their Contact Us form and got very quick responses. If you used that form, and if you have an account there, you can log into your account to see if they responded - just in case you missed the email reply.
I posted this yesterday, but it disappeared. If you have the silicone sleeve and are noticing that it likes to creep up the SX Mini here and there, use double sided tape like the kind the ladies use to prevent wardrobe malfunctions. After you put the sleeve on the SX Mini, roll the bottom up over itself like your turning it inside out, and then place one strip of tape on either side of the mod. When you roll the latex back down, you will have that little extra bit of friction you need to hold it nicely in place.
Sent from my iPhablet using Tapatalk
Sent from my iPhablet using Tapatalk
And I've also found my preferred setup finally (at least until my Goblin Mini and Goliath 2 show up and I try them out).
I'm currently running a hybrid Atlantis (V2 base with A-Mod 7ml extension) with the Vapor Shark Nickel Coils at 40J and 450F.
Produced a nice warm voluminous cloud. I'm seriously impressed by the Vapor Shark coils and how well they wick.
Sent from my iPhablet using Tapatalk
I'm currently running a hybrid Atlantis (V2 base with A-Mod 7ml extension) with the Vapor Shark Nickel Coils at 40J and 450F.
Produced a nice warm voluminous cloud. I'm seriously impressed by the Vapor Shark coils and how well they wick.
Sent from my iPhablet using Tapatalk
Guys, this Valentino (who makes the leather cases) speak english, or just don't want to answer? I ask him about the shipping price for the eu.
I ask him about the shipping price for the eu. 
thats a second vote for the VS atlantis heads!
I feel like i just lost some weight (even with an extra battery). That and I don't need a belt anymore to hold up my pants!
60,000 joules....and she's still going...
Disregard the previous. Tried to reply to another post and that one came up.
It's pretty common for most plastics to be less in weight than most metals. That should be expected.
But how could I carry it without it feeling like I had two mods in my pocket?
Keep going your almost to catch me. I'm a little over 80k joules right now on my single but I have the option to top off the battery utilizing the built in USB charger while I vape on my other SXmini m. Works out well since I get vapors tongue and switch flavors / devices regularly anyway. And no need in going off into the primary purpose of the USB I'm fully aware of the warranty of the USB as well as the the risks I'm comfortable in taking with that.
But you cant use the USB charger since it doesn't have a built in balance charger for your series configured batteries, same as with the battery tube extension on the SXmini m.
- Status
