Powerful the bar still drops to empty when firing, but the lowest voltage I saw on the battery was around 3.1v.
SXmini M Class (TEMP CONTROL)
- Thread starter whitewidows
- Start date
- th_trl_thread_readers 0
- Status
Its really pushing the limits of a single 18650 battery. I wouldn't recommend people using 75W on Powerful+ with a single 18650 24/7, unless you hate your 18650s and want to replace them every month.
Any other changes with the new software?
My SX now loses the wattage setting I had, when I change batteries... I have the previous update installed.(2.2?)
Does this update fix that issue?
I am using a Silo Beast, with Atlantis .5 ohm coils. I set it to 40 watts, and vape away.
However, when I remove the battery and replace it, the wattage has now gone down to 25w (I believe... maybe 21 watts) and I have to reset it. This isn't how it worked previously... anyone else notice this? Does the new software version fix this?
Thanks
My SX now loses the wattage setting I had, when I change batteries... I have the previous update installed.(2.2?)
Does this update fix that issue?
I am using a Silo Beast, with Atlantis .5 ohm coils. I set it to 40 watts, and vape away.
However, when I remove the battery and replace it, the wattage has now gone down to 25w (I believe... maybe 21 watts) and I have to reset it. This isn't how it worked previously... anyone else notice this? Does the new software version fix this?
Thanks
That doesn't happen to me. Are you setting the wattage in the menu or something?
Yeah... I set the wattage in the menu, not one of the memory settings, and it's in Power mode, not temp.
However, I used it the same way before the update, and it would keep the same wattage after a battery swap as it was prior to swapping out the battery.
Not a big deal, but kind of a hassle to always have to reset my wattage when I insert a fresh battery.
Well as has been said the upgrade is out. It is available at the yihisxmini.com site. Now as for getting the best titanium have gotten one site but they are out of the 26awg which I want to use. How many sites are there that have the grade 1 titanium wire and who has the best quality.
Ahh, gotcha, yeah, I've never set the wattage in the menu, that must be the difference, always just used the presets.
I just tried it on the test firmware, set wattage to 46W, swapped battery, turned back on and it was on the M1 setting, which is 15W on mine.
If I'm understanding you correctly, in your going into the sub menu and setting your power or joules then when exiting you default to M1 with whatever you set but lose that setting when changing batteries? I believe you will also lose that setting when hitting the up button or running through the different Mx locations.
If so that has not been fixed with this release and is a bug that was introduced with 2.1 if I recall correctly.
I'd suggest setting your output as follows to work around this.
Hit Up button to select Mx location you want to set
Hit Down button to Adj
Hit either Up button or Down button to adjust to your preference
Hit fire button when your done Adj
Last edited:
Thanks, Vlad...
That's what I'll do, simply use one of the memory settings.
Just upgraded, and see that in Power mode, I can now set it as high as 75w!!!
Wow!
That's what I'll do, simply use one of the memory settings.
Just upgraded, and see that in Power mode, I can now set it as high as 75w!!!
Wow!
I just installed the latest update, and I can now change my watts in Power mode to as high as 75w!
Only with Ti or Power mode not in Ni200. Really not sure why Ni200 is limited to 50j????
Yeah, I noticed that after I installed it earlier as well. Try 75W on Powerful+ and watch your battery cry for mercy.
Probably due to the ultra-low ohm capability of the SXM with respect to Nickel, which means the voltage required is beyond the capability of the buck-boost circuitry for 75J.
When you upgrade to 2.23 are you ok with the SXI app you used for the 2.2 upgrade?
Probably right, that makes sense. Dumb question now that I think about it.
I need to wake up, still on my first cup of coffee and up til 4:00 last night.
With the upgrade are you able to set your temp like with nickel, I use 390 and 12J on a .07ohm coil with nickel. Also I am using 28awg 5 wraps with nickel.
I'm really not seeing any difference with Ni200 selection 2legs. From what I can see all previous bugs that I'm aware of are still present and there's no observable difference when running under Ni200. Have not done any measurements with DMM or scope but operationally it's basically the same. Gotta run around town to see if any vape shops have Ti so I can play around with it a bit.
The guys that are using Ti are you using the type that has that flat grey finish and not shiny or what. I see stealth vapes carries it also.No I guess they don't.
- Status
