Insulated = non-conductive = no flow of electrons = not part of the circuit = no increase in resistance
SXmini M Class (TEMP CONTROL)
- Thread starter whitewidows
- Start date
- th_trl_thread_readers 0
- Status
Insulated = non-conductive = no flow of electrons = not part of the circuit = no increase in resistance
Anyway we're getting off the topic. Please go back to the instruction on the SX mini:
Does no one understand what this means? How can no one see the problems with this?
Does no one understand what this means? How can no one see the problems with this?
Of course. The bigger the circuit ... the more resistance, especially when you introduce less conductive materials into the circuit.
That's why resistance is measured in length ...
I would look up electricity 101 and read the resistance chapter paying especially attention to how to calculate the total resistance of a circuit with two differing resistors in parallel.
Regards
Tony
Sent from my keyboard through my phone or something like that.
Well my first nickel build is in, after a bit of annoyance. The stuff is so soft...waiting for some hard nickel from the UK but ordered some of the soft stuff from the states first.
So I did 12 spaced wraps, 28 gauge ni200 on a 3mm screw, reading 0.21ohms. Set the temp to 390F.
The vape is a LOT warmer then I'm used to, actually nice but gets a bit hot over time. If I press and hold the fire button, it doesn't seem to go over 200F, why is that? Running it at 13J.
Flavor is really, really nice, initially. Somehow I'm not positive the TC is really working, it gets really hot after holding it down. Any help appreciated!
My atomizer really hot to the touch, but screen still showing only 200f on fire..
So I did 12 spaced wraps, 28 gauge ni200 on a 3mm screw, reading 0.21ohms. Set the temp to 390F.
The vape is a LOT warmer then I'm used to, actually nice but gets a bit hot over time. If I press and hold the fire button, it doesn't seem to go over 200F, why is that? Running it at 13J.
Flavor is really, really nice, initially. Somehow I'm not positive the TC is really working, it gets really hot after holding it down. Any help appreciated!
My atomizer really hot to the touch, but screen still showing only 200f on fire..
Last edited:
You are a master of diplomacy Tony. I have a hard time maintaining my composure. You seem to do it with great ease. I'm envious!
I've just received mine today, is there a way to turn off the gyroscope? I think mine is faulty, if I go to change watts it goes up no matter what side I turn...... It never goes ddown... ... always rthe lucky one with faulty stuff
Then if "Gunk" has resistance (I am sure it does) and you place it in parallel with the coil the resistance would go down.
Yes it will... In series, not in parallel which you were implying with build up gunk.
So once again, get your facts straight first.
Regards
Tony
Sent from my keyboard through my phone or something like that.
Sptz,
You don't have a fault I am very sure it is the unusual way the unit works. if you are holding like you normally would when reading the screen you would think you could just tilt it down on the left or right but noooo you kind of have to stand on your head.
I am not going to tell you how to get the scroll to work correctly because I am too inexperienced myself. I will leave that for someone that has it down pat. But when I was first setting mine up I experienced what you are seeing. I got it to work correctly but as embarrassing as this may be I was so anxious to get it going I didn't pay attention to what I did.
I just want you to know your unit is OK and some expert will jump in here and tell you exactly how to do it.
Last edited:
Are you holding it vertical or horizontal when your trying to use the gravity sensor? It should be vertical.
I'm confused as to why you keep mentioning parallel resistors?
From what I understand gunk on a coil doesn't necessarily run in parallel due to coil oxidization? Which again, explains the increase in resistance.
From what I understand gunk on a coil doesn't necessarily run in parallel due to coil oxidization? Which again, explains the increase in resistance.
I am amazed with my first 24 hours with this SX Mini M class....I don't usually post more of a lurker on the forms but i have to include my 2 cents with this fantastic machine. I've been vaping since Jan 01 and started with a i stick 20/mini nati-mini to a smok m65 subtank mini/lemo drop to a Segieli mini 30 it seems like i have been chasing a vape. This SX mini is everything i have been looking for the past 90 days....this is my first TC mod and I received the SX last night from Varitube.com and 100ft 28ga Ni200 for $9 amazon prime and built my first NI200 coil on the Sub Tank Mini 10wraps 3.0mm read .154ohm wicked with some kgd and filed the tank with some 80 vg 20 pg Gush. Set the SX mini to Joules 33 420 degrees and let me tell you the best vape i have ever had! From the first puff untill the tank was completely empty( i dumped the tank over 0 liquid running out) every single puff was perfect!! Zero dry hits, zero popping of juice in the mouth nothing but flavor and clouds the whole tank! With my other vv mods when the liquid got low or you held at the wrong angle i would worry about dry hits and that nasty taste not with the SX Mini M Class this thing is so amazing to me every last drop is perfect....and the NI200 isnt too much harder to build with it just takes a little gentler touch thank the kanathal. If anyone is considering upgrading from any basic device what so ever i highly suggest you spend the extra money and buy the SX Mini M Class no matter how you vape or what tank you vape with i would buy this mod and not think twice! Worth every penny!
Last edited:
Hate to intrude in the middle of the whizzing contest but WHERE ARE ALL THE SEXY BLACK AND ROSE color ones!? No site has them in stock! Are they sold out or have they not released them yet??
I have been pushed over the edge to have one of these - and the color I want isn't in stock! sigh...
Guess I could buy the silver/rose one and throw a wrap on it when I give it to hubby after they get the black/rose in stock!
I have been pushed over the edge to have one of these - and the color I want isn't in stock! sigh...
Guess I could buy the silver/rose one and throw a wrap on it when I give it to hubby after they get the black/rose in stock!
Thank you Vlad1.
I sure didn't sptz to think his unit was malfunctioning. Please help him out there is nothing worse than a new toy that you think is belly-up.
- Status
