SXmini M Class (TEMP CONTROL)

[JRizCR2]

took a qtip to my battery cap threads. surprised at the amount of stuff i was able to get off with just a qtip. but the cap threads on much easier now. i dont need a coin to get the cap on and off anymore.

 

[derogg]

Is the only thing stored in the memory bank the power setting? No way to save of temperature or mode settings?
Thanks -Dirk

 

[a tez]

Pbusardo's initial impression of the mini... ya only need to listen to the first 1 minute.... LOL ... 100 comedians out of work and......LOL

Wow that hurt my head lol. Looks like he said it was excellent though.

 

[Fir3b1rd]

Wow that hurt my head lol. Looks like he said it was excellent though.

I tried doing some lip reading, and I thought he said "the devil eats cheese whiz"
Lmao!!!!

 

[Vlad1]

Is the only thing stored in the memory bank the power setting? No way to save of temperature or mode settings?
Thanks -Dirk

To the best of my knowledge the only thing stored in the memory is watts and joules for each mode of operation.

 

[retird]

Wow that hurt my head lol. Looks like he said it was excellent though.

I tried doing some lip reading, and I thought he said "the devil eats cheese whiz"
Lmao!!!!

LOL... beats me.... I can't read lips.... he did say a bit more right at the end of the Goblin video but we will await his review ....

 

[derogg]

To the best of my knowledge the only thing stored in the memory is watts and joules for each mode of operation.

That's what I thought and could not find anything different. Just wanted to make sure I wasn't missing anything. Maybe in a future firmware update they will make the memory settings more useful.
-Dirk

 

[Braddahbill]

I really like it.. It's a well made tank, and yes, I would purchase one again. Great value for the $$ IMO.. I also had the VCT, and it pales in comparison.

EDIT: I should add that I find the flavor good, it's easy to grip the base to remove when filling, and the AFC can be set for most any vaping style.. I can close it up enough for a mouth-to-lung, or wide-open for direct lung inhales (which I don't really enjoy).

Thanks, Smok is coming out with the VCT Pro and this site says you can use the Gimlet Nickel coils. I am leaning more toward the VCT Pro as I don't like the gold accents on the Gimlet, but will wait for the reviews to come out.

SMOK VCT Pro + Coils $33.97 | Vaping Cheap

 

[retird]

I really like it.. It's a well made tank, and yes, I would purchase one again. Great value for the $$ IMO.. I also had the VCT, and it pales in comparison.

EDIT: I should add that I find the flavor good, it's easy to grip the base to remove when filling, and the AFC can be set for most any vaping style.. I can close it up enough for a mouth-to-lung, or wide-open for direct lung inhales (which I don't really enjoy).

How does the flavor compare to the Kanger OCC nickel coils? if ya know.... thx..... oh... did they fix the "wobble" at the drip tip yet? thx

 

[Vlad1]

That's what I thought and could not find anything different. Just wanted to make sure I wasn't missing anything. Maybe in a future firmware update they will make the memory settings more useful.
-Dirk

There 5 spots for Joule mode and 5 for watts for a total of 10. I find those adequate and extremely useful. When switching attys I simply change memory locations and done. If I switch to a juice that needs a different temperature it only takes a sec to change that as well. I've had an SX350 v2 for quite a while now so I'm pretty familiar with the memory slots. I know it's something new to a lot of folks.

 

[Fir3b1rd]

About a month before I got this I had gotten an ipv4, before that nothing but dnas and proovaris.
Any sort of memory setting is extremely useful and welcomed convenience

 

[ThunderDan]

Thanks, Smok is coming out with the VCT Pro and this site says you can use the Gimlet Nickel coils. I am leaning more toward the VCT Pro as I don't like the gold accents on the Gimlet, but will wait for the reviews to come out.

SMOK VCT Pro + Coils $33.97 | Vaping Cheap

It has been confirmed that you CANNOT use the Gimlet nickel coils on the VCT pro.

That site just put a rumor up based upon somebody that thought they might work.

Sent from my Nexus 6 using Tapatalk

 

[derogg]

There 5 spots for Joule mode and 5 for watts for a total of 10. I find those adequate and extremely useful. When switching attys I simply change memory locations and done. If I switch to a juice that needs a different temperature it only takes a sec to change that as well. I've had an SX350 v2 for quite a while now so I'm pretty familiar with the memory slots. I know it's something new to a lot of folks.

I agree thats it doesn't take long to do. It would be nice to be able to set all the parameters to a memory slot and be done with it. No big deal.

 

[Technonut]

How does the flavor compare to the Kanger OCC nickel coils? if ya know.... thx..... oh... did they fix the "wobble" at the drip tip yet? thx

Couldn't say about the Kangers.. I'm used to RTAs like the Rose V2, Taifun GT, etc.. It's not as good as those, but still good nonetheless. The included DT does wobble.. I Immediately swapped it out with one of my others which does not..

 

[derogg]

I really enjoying the SXmini after only a day with it. It is my first "high end" device. I have tried out TC with my Marquis 30 gauge nickel around the 3.5mm mandrel single coil. 0.15 ohms running at 25 J and 425F. Also my Kayfun 3.1 30g Nickel 2.5mm ID 17J at 425F. Its a different vape then I am used to. Smoother. I need to play with the settings and see how it changes the experience.
Building nickel coils was a breeze. I had no issues at all. I think if you can coil kanthal nickel is just as easy. I built the coils, juiced them and set the resistance. They came out to what SteamEngine calculated.

 

[Braddahbill]

I really enjoying the SXmini after only a day with it. It is my first "high end" device. I have tried out TC with my Marquis 30 gauge nickel around the 3.5mm mandrel single coil. 0.15 ohms running at 25 J and 425F. Also my Kayfun 3.1 30g Nickel 2.5mm ID 17J at 425F. Its a different vape then I am used to. Smoother. I need to play with the settings and see how it changes the experience.
Building nickel coils was a breeze. I had no issues at all. I think if you can coil kanthal nickel is just as easy. I built the coils, juiced them and set the resistance. They came out to what SteamEngine calculated.

Yes I agree 100%, I was following another TC Facebook group where the users stated that the Lemo was really inconsistent on their mods and also the nickel coils were hard to work with. I built my FIRST nickel build on my Lemo and it was rock solid with an awesome vape experience that was better than any Kanthal build in my tank.

 

[a tez]

I really must say this Lemo 2 is incredible. I've put 4 tanks worth of liquid through it today and it's great. Got a .19ohm build in it and the flavor and vapor production is awesome. 40J 400F.

 

[retird]

Couldn't say about the Kangers.. I'm used to RTAs like the Rose V2, Taifun GT, etc.. It's not as good as those, but still good nonetheless. The included DT does wobble.. I Immediately swapped it out with one of my others which does not..

Good to know regular drip tips fit properly.... thx...

 

[dr g]

Yes I agree 100%, I was following another TC Facebook group where the users stated that the Lemo was really inconsistent on their mods and also the nickel coils were hard to work with. I built my FIRST nickel build on my Lemo and it was rock solid with an awesome vape experience that was better than any Kanthal build in my tank.

The lemo has proven inconsistent across units mostly, not so much across builds. Has to do with the construction.

 

[Ray J Neal]

I rock an authentic origenny on the SX mini. In fact, I rock one on this, and five DNA40 devices. It is a MUST have, IMO.