SXmini M Class (TEMP CONTROL)

[2legsshrt]

I guess I don't have 3 of the newest ones because I don't have a black or white one with the hole in the side of the rba but the only problems I have ever had with any of them as far as fluctuations in resistance were quickly fixed with a Qtip and some alcohol on the 510 pin. It's amazing how an almost invisible amount of dirt can change your resistance by .01 or more.

 

[2legsshrt]

Do you actually read this as being official anywhere?

Just jumped on the Ti bandwagon a few days ago. Even vaping it right now on the Sx, but actual support for it would be pretty sweet (kinda figured they'd sell us out and try to cash in again with a new mod. SX T Class or some crap).

Yeah it would be great if it came out as a firmware upgrade but I won't hold my breath. I'm pretty satisfied with nickel not going to put more money out. Unless they would sell you the upgrade and not have to put a new chip in.

 

[TheBloke]

The SX Mini M Ti firmware upgrade is coming. There was a photo of it just a page or two ago in this thread.

 

[footbag]

Yeah it would be great if it came out as a firmware upgrade but I won't hold my breath. I'm pretty satisfied with nickel not going to put more money out. Unless they would sell you the upgrade and not have to put a new chip in.

It's coming! Very soon!

 

[2legsshrt]

The SX Mini M Ti firmware upgrade is coming. There was a photo of it just a page or two ago in this thread.

Yes but it doesn't say it's going to be a firmware upgrade it is a new chip from my understanding. Will be interesting to see if it is. I have heard good and bad about Ti so not really sure about it never used it and it is kinda expensive. I'm getting really good results with NI200 so it's not a must have for me but it would be cool for all the Ti people.

 

[Marc411]

Yes but it doesn't say it's going to be a firmware upgrade it is a new chip from my understanding. Will be interesting to see if it is. I have heard good and bad about Ti so not really sure about it never used it and it is kinda expensive. I'm getting really good results with NI200 so it's not a must have for me but it would be cool for all the Ti people.

2legs, It's a free firmware upgrade like Yihi has been doing for over a year with their chips. It is not another chip. I have it currently running on my M class through an upgrade. Yihi will release it shortly they just want to complete testing and have clean firmware when it's released.

 

[2legsshrt]

Wow that is cool. How is it working. Do you still have all the nickel settings also?

 

[Marc411]

Yep, it's user selected in the menu.

I really liked the SXmini and with this upgrade I'm really enjoying even more. It's performing great and a very consistent vape with no glitches.

 

[roxynoodle]

I have the new ti firmware also, and agree with Marc that its running fantastic.

 

[2legsshrt]

Yep, it's user selected in the menu.

I really liked the SXmini and with this upgrade I'm really enjoying even more. It's performing great and a very consistent vape with no glitches.

Yep me too. I only have an occasional glitch when I set the resistance sometimes it changes modes on me and I don't notice it until I try it and it's not right and sometimes comes off the memory spot I was on. But nothing major that's why I have 3.

 

[HolmanGT]

Yep me too. I only have an occasional glitch when I set the resistance sometimes it changes modes on me and I don't notice it until I try it and it's not right and sometimes comes off the memory spot I was on. But nothing major that's why I have 3.

You have the Beta Ti upgrade?

 

[m00shie]

I'm unsure but I've been having the memory location issue (not really sure if it's an issue or an intended feature) since the latest v2.2. Whenever I go into the main menu and exit, the memory location will revert to m1 (eg: 15J) although the Joules is showing the figure I set on m3 (eg: 25J). However, when vaping, it feels more like 15J than 25J (I'm unsure if my mind is playing tricks on me or if this is a bug). So, I normally set the memory location back to the correct location after I exit from the menu.

It's not really a big deal to me. Not sure about others.

 

[Taowulf]

Ni200 build 28ga .1ohm on the newer Subtank RBA head, currently in the Subtank Plus and working fine.

I am not using it on the SX Mini right now, my Lemo won't leave the SX, they go so well together.

Similar build on the Lemo though, had to get creative as my phone was not wanting to focus on the coil of the Lemo after I rebuilt it the other day.

 

[Firecrow]

I second that. I have a Lemo Drop and a Lemo 2 and carry my VS rDNA40 as a backup. I prefer the footprint and battery life of the VS product, but I prefer the performance of the SX Mini M.

 

[JimScotty0]

I'm unsure but I've been having the memory location issue (not really sure if it's an issue or an intended feature) since the latest v2.2. Whenever I go into the main menu and exit, the memory location will revert to m1 (eg: 15J) although the Joules is showing the figure I set on m3 (eg: 25J). However, when vaping, it feels more like 15J than 25J (I'm unsure if my mind is playing tricks on me or if this is a bug). So, I normally set the memory location back to the correct location after I exit from the menu.

It's not really a big deal to me. Not sure about others.

Yep, that is a minor bug with the v2.2 firmware. it pops out into M1 but it really is using whatever you had it set to before and it is using what is on the display. Hopefully the next update will fix that.

 

[Quantum Mech]

Been using Ti for weeks on the M class

Those without the Beta Titanium upgrade, just set TP to 260f

Would never use Ni200 again and will take some convincing to get me to try anything else at it works a treat and with no metal taste, juice flavour is

 

[Lemwise]

The leather guy I talked to about making a skin for the Mini didn't work out. He just didn't understand what I wanted so I ended up doing business with Valentino anyway and I'm glad I did. His skin is beautifully made and fits the Mini like a glove.

 

[Subohmies]

For leather check out handicraftleatherco.com
They are making the m class now, I have their vaporshark leather skin and they are awesome

 

[footbag]

Yep, that is a minor bug with the v2.2 firmware. it pops out into M1 but it really is using whatever you had it set to before and it is using what is on the display. Hopefully the next update will fix that.

Thanks for that info. I thought I was doing something wrong.

 

[Marc411]

So far it looks like that problem has been resolved in V2.23, I haven't had that happen to me yet