probably nothing wrong with sanding the edges down.
I've dropped mine a few times already and it's dulling the sharp corners by itself.
Thanks, Jules.
SXmini mod ... Yihi
- Thread starter bonmatos
- Start date
- th_trl_thread_readers 0
- Status
Thanks, Jules.
I'm not so sure about that. I don't have one (yet) but it looks like the body is powder coated. I'd find out first.
No cig
No cig
As I posted before in regards to the silicone case being developed by Yihi. I'd wait and see if it really materializes. If so , slip that puppy on and you'll have a new looking/ feeling SXmini in your hand !
Is the lip where the atomizer sits sealed? I know that was one of my fears with the vaporshark and using my kayfun on it, as the kayfun seems to leak a little fluid due to the poor air flow when on the shark - never happens on my provari 2.5 which doesn't seat the kayfun perfectly and leave a small gap(which happens to be a good thing in this case).
Or is the airflow good enough where condensation or whatever occurs doesn't happen? Anyone use theirs with a kayfun that could chime in?
Thanks!
Sent from my iPhone using Tapatalk
Or is the airflow good enough where condensation or whatever occurs doesn't happen? Anyone use theirs with a kayfun that could chime in?
Thanks!
Sent from my iPhone using Tapatalk
I would have gone for an all black if that was an option, but I'm happy with the grey/silver now that I have it in hand. It wasn't my first choice in color, had the gold pre-ordered, but that ended up not being a thing, so I'm glad I switched it to grey when I did. Really like this m class thus far.
grey was what i was going to get with the S class. Glad i got it in the M class even though i wanted the black face
Just ordered an m class from Vape NW & some 28ga ni200 from eBay. Can't wait to try out this temperature control stuff!
I received the battery extension tube today for my S class SXmini. First let me say I am NOT a fan of the look, but I do like the improvements it offers such as longer battery run times and increased wattage output. I like how it feels in my large hands.
The SXmini's maximum output wattage range increases to 120 watts automatically when two batteries are used. The wattage adjustment is in tens of a watt up to 100 watts and after 100 watts it adjusts in 1 watt steps.
This battery extension tube will also work on the new M class.
The SXmini's maximum output wattage range increases to 120 watts automatically when two batteries are used. The wattage adjustment is in tens of a watt up to 100 watts and after 100 watts it adjusts in 1 watt steps.
This battery extension tube will also work on the new M class.
i was told it won't work with the new one- different threads. per angelina @yihi FYI
She must be mistaken... I am able to interchange caps between both the M, and S Class..The S Class cap is slightly taller, but the threads are the same..
I guess I misunderstood? there is not actually a problem but people don't like the warranty terms? if that is the case give me a break. no one "owes" us any warranty! that is a tool to increase perceived value and increase sales. I honestly do not ever base a purchase on the warranty. If you like it enjoy it while it works. if you can afford it get another one when it busts. different story if a product is just a defective design. like, ahem dna40. anyways so far nothing wrong with mine. every dna40 device busted on me within 48 hours. honestly I do not love the design of the sx mini but the chip is really what it's about.
if you like something and it is metal do not go at it! unless you are skilled with metal working. I am a bit but I have access to a fully stocked metal shop.
one question. does the tube work on the m? 120 on ni200 .1 build would be crazy.
if you like something and it is metal do not go at it! unless you are skilled with metal working. I am a bit but I have access to a fully stocked metal shop.
one question. does the tube work on the m? 120 on ni200 .1 build would be crazy.
That's not how it works. There are two different modes, power (watts) and joules. With the batteries in series (extension tube), in power mode you will be able to go up to 120w. Joules mode remains the same, 5-50J.
Do you need a firmware upgrade to get the 120w?
Are both batteries supposed to face the same way? + end up?
When I jury-rigged a tube from another mod to try, it was able to go up to 120 watts using the v1.3 firmware. Both batteries face the same way, with the + up..
Lol, I was trying to do the same thing using my SMY Stingray as the threads are the same. I just don't have enough of the extensions tubes to make it fit right and I'm not keen on spending $30 on a tube that'll make it look like I'm holding a big popsicle. Hoping someone will do a 3d cad and make something more ergo on the front of the unit that keeps to the original design.
I did not have to do anything other than screw the extension tube on and insert two batteries on my S class.
I got to admit my SXmini with the extension tube is not the best looking thing. But I am loving the battery life. I put two freshly charged batteries in 24 hours ago and I am still vaping away with still 25% battery level. Another plus is the cap on the bottom of the tube just screws off with your hand so easy when it is time to change batteries.
I paid $19.99 for mine, but see the seller has raised the price to $29.99 now. No sure what happened with that.
The SXmini really shines with two batteries, so I am in the process of building a box mod now with the new J chip and two batteries along with an onboard balance charger.
Last edited:
Cool! Thanks y'all! I rarely go above 60 even on my ipv but I ordered it for the few times I want to use the power. The mod is so good looking with the 1 battery but battleaxe mode for 20bucks with that chip is worth it not to have to buy another mod. Haha
Although, should a dual batter sx350 become publicly available im all about it.
Although, should a dual batter sx350 become publicly available im all about it.
- Status
Similar threads
