TAE (Tilemahos Armed Eagle)
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
Got mine Juhu
What I love:
No more steel<->plastic threading ruining the mostly sold out tanks if not screwed VERY carefully.
What I like:
The look - design (eagle engraving
The size
The new drip tip form.
Glas, not plastic
What I don't know:
What are these parts for?
Sorry, I'm too stupid to upload a picture.
It's a big white plastic ring (app 1cm high,2cm diameter , a small white plastic cylinder and a round metal stick App 5cm Long 6 or 7mm diameter.
What I need:
Practice in refilling as on the first try I had a massive leaking overflowing my trousers, me, and my table.
What I'd like:
Small riffles on the top cap to grab it more easy for opening/ closing.
What I do not like:
No airflow control ring (like on Springomizer and even better on Armed.)
What I love:
No more steel<->plastic threading ruining the mostly sold out tanks if not screwed VERY carefully.
What I like:
The look - design (eagle engraving
The size
The new drip tip form.
Glas, not plastic
What I don't know:
What are these parts for?
Sorry, I'm too stupid to upload a picture.
It's a big white plastic ring (app 1cm high,2cm diameter , a small white plastic cylinder and a round metal stick App 5cm Long 6 or 7mm diameter.
What I need:
Practice in refilling as on the first try I had a massive leaking overflowing my trousers, me, and my table.
What I'd like:
Small riffles on the top cap to grab it more easy for opening/ closing.
What I do not like:
No airflow control ring (like on Springomizer and even better on Armed.)
Last edited:
I don't think an airflow control is necessary but I would love a more open DL
Enviado desde mi SM-N950F mediante Tapatalk
Well, I'm opposite: for my mouth2lung preference there's too much air, even with the smaller center pin.
I'm missing the airflow control of Springomizer and Armed.
I'm missing the airflow control of Springomizer and Armed.
Hi, the white plastic bits are just packing materials to ensure no damage during shipping. The brass ‘stick’ is a tool to help if you want to dismantle your TAE to component parts. Hope this helps a little.
Imeo will for sure know better, but I guess the white ring is for TPD2 alibi purposes only. Reduces the tank to 2 ml. And the other white threading is for wicking on a testing device (without the possibility of metering of course, what is a pitty).
Last edited:
Solved my personal "too much air problem". Reduced the air slots with adhesive tape on the inside.
Very primitiv but for my habits effective.
Nevertheless, Imeo why did you leave away this feature, after you improved it so much between the V2 and the armed?
Very primitiv but for my habits effective.
Nevertheless, Imeo why did you leave away this feature, after you improved it so much between the V2 and the armed?
Last edited:
the reasons that I didnt made air ring were two marst:
solid construction. No moving parts that dont let you unscrew well the atomizer from the mod
ad ring reduce air but reduce vape and hit too. Pins are exactly what we need to have a perfect vape
solid construction. No moving parts that dont let you unscrew well the atomizer from the mod
ad ring reduce air but reduce vape and hit too. Pins are exactly what we need to have a perfect vape
Yes, air pressure directly on the coil is what makes a good dense vape. If air pressure releases on the ring and the coil gets a weak air stream you get a harsh throat hit and difuse vapor. You just need the correct tube for your liking to get a perfect vape. For me the smallest one included is perfect for mtl but if you're not satisfied I'm sure we will have more options in the future.the reasons that I didnt made air ring were two marst:
solid construction. No moving parts that dont let you unscrew well the atomizer from the mod
ad ring reduce air but reduce vape and hit too. Pins are exactly what we need to have a perfect vape
The problem for me comes with the direct lung. It's ok but a little tight for me.
Imeo, will you make a negative connector with bigger or more air holes for direct lung vaping in the future? Tightening the airflow is always possible with eagle but opening it more is not. Better have the biggest airflow possible and reduce from there.
Also, will you release more build decks? For super coil users would be awesome a postless deck or something like that.
By the way, congratulations. It is a beautiful versatile and very satisfying atomizer for all kind of vapes, which makes it the only atomizer in the market suitable for any vaper, as far as I know.
Enviado desde mi SM-N950F mediante Tapatalk
thank you cyber for liking eagle and it seems that you are right on everything.
As for the direct to lung hole, the biggest that can made is 5mm as it is right now. Bigger hole requires fatter Eagle
You got me with the deck. Yes, I am thinking of releasing new decks in future
As for the direct to lung hole, the biggest that can made is 5mm as it is right now. Bigger hole requires fatter Eagle
You got me with the deck. Yes, I am thinking of releasing new decks in future
Awesome news!thank you cyber for liking eagle and it seems that you are right on everything.
As for the direct to lung hole, the biggest that can made is 5mm as it is right now. Bigger hole requires fatter Eagle
You got me with the deck. Yes, I am thinking of releasing new decks in future
About the air hole, I don't know why but it doesn't feel like a 5mm drag. I thought it might be the 4 holes in the negative pole not being enough or maybe it is the build deck once the wick is in place that is restricting the air too much...
Nevermind. I am so happy with the product. Looking forward to having all its future accessories. The changing abilities is one of the main reasons why I've been collecting all your tanks since Odysseus. Keep up the great work!
Enviado desde mi SM-N950F mediante Tapatalk
Hmmm, yeah! Perhaps a deck that would take two springs. Would be interesting. And thank you Imeo for you know what.
In the meantime you can also try this set up that is very easy if not easier than the single coil yaya. Christina from german forum found it
christin1 — Postimage.org
christin1 — Postimage.org
Each time better. Thanks to Fabvape and Imeo.
Sent from my iPhone using Tapatalk
Very, very cool. I was just thinking out loud about dual springomiser TAE. But very nice work Christina.In the meantime you can also try this set up that is very easy if not easier than the single coil yaya. Christina from german forum found it
christin1 — Postimage.org
plus I am very pleased with my TAE 
- Status
