Thanks Isaac. That's what I suspected but wanted to make sure. Are these the same length as the original Mini? Thanks.
- Status
Isaac, I had to ask.
I just received my order of (IKV LR 801 Full-sized 2.0Ω Atomizer)
And it is the same lenth as the 801's I ordered back in the summer. Silver band with IKVLR on the side?
is this the new ones? If it is I'm more than happy. Just suprized it was the shorter one.
After a closer look at the web site it looks like I got the (IKV LR 801 2.0Ω Mini Atomizer)
No complants this is the one I wanted in the first place but it said sold out.
I just received my order of (IKV LR 801 Full-sized 2.0Ω Atomizer)
And it is the same lenth as the 801's I ordered back in the summer. Silver band with IKVLR on the side?
is this the new ones? If it is I'm more than happy. Just suprized it was the shorter one.
After a closer look at the web site it looks like I got the (IKV LR 801 2.0Ω Mini Atomizer)
No complants this is the one I wanted in the first place but it said sold out.
Last edited:
Not even one.Haha I seen you Vaporo,
Just didn't answer because it was addressed to Mwa, probably out xmas shopping
The difference is that since the barrel is cut shorter, this gives the vapor less travel room, taking away the cool down period providing a notch more actual feel (throat hit) and warmth.
Now that sounds like a plan 5card! LOL
Totally nailed the evil laugh. So how many PM's did ya get in the past 12 minutes?
OK guys I'm back I was out chasing Santa clause with my wallet trying to bribe him for all the best gifts, my daughter is going to have a blast on Christmas morning when she walks downstairs and sees all the gifts piled to the ceiling, but she's going to have to see them all THROUGH THE PLUMES OF VAPOR FROM MY MINI 801's hahahah The "I" man has absolutely brought us a winner of an Atty here. I had left the 6v world for a while but I have to say I'm back to 6v vaping with these Minis again.
I have been running these on a bottom feeder with VV but I ran my unit so hard it broke down and I'm waiting for it to hit my mailbox any day again, had a brand new Reo Grand delivered today and melted my spring from the test Atty being bad "omg" can you say bad day?,,,, so I have been dripping with another VV mod and OH MY GAWD are these Mini 801's tasty, there is no other Atty that brings out the taste like these Minis do. I have a ton of Regular sized HV 801 Attys and as soon as I have the time I am breaking out my Dremmle and tube cutter and cutting them down or just going to sell them, I have enough of the Iken Minis to last me 2 yrs now so I should be good, I scarfed up a good bit of them from Issac because I cant be without of these babies, running them anywhere from 5.5v-6.3v is FANTASTIC there just is no better Atty to vape from in my honest opinion, be it the 2ohm Mini or the HV Mini,,, you all can have your 306/510/901 i'll take all the Mini 801's OK...!!! The "I" MAN is unbelievable, I'm voting for him for president of the United States next election, Obama Who ? Issac your running the ship now so keep doing whatever it is your doing buddy, if you wake up at 5am have your coffee and vape and just think until 7am don't change a thing buddy, if your wearing your baseball cap on Saturdays and Sundays DONT TAKE IT OFF Brutha, Just don't change one thing because everything you touch is turning to gold my man, I have to tip my hat to you for bringing us this new winner of an Atty along with your dripping cartos I love those as well and need a few thousand, hahahahah Bless you Issac your the best, ya know, the more I think about it I have never heard not one bad thing about this guy, EVER !!,, has anyone ???? Issac you simply ROCK my man keep up the great job you do in the vaping community for all of us, you have definitely found your calling.!!!
I have been running these on a bottom feeder with VV but I ran my unit so hard it broke down and I'm waiting for it to hit my mailbox any day again, had a brand new Reo Grand delivered today and melted my spring from the test Atty being bad "omg" can you say bad day?,,,, so I have been dripping with another VV mod and OH MY GAWD are these Mini 801's tasty, there is no other Atty that brings out the taste like these Minis do. I have a ton of Regular sized HV 801 Attys and as soon as I have the time I am breaking out my Dremmle and tube cutter and cutting them down or just going to sell them, I have enough of the Iken Minis to last me 2 yrs now so I should be good, I scarfed up a good bit of them from Issac because I cant be without of these babies, running them anywhere from 5.5v-6.3v is FANTASTIC there just is no better Atty to vape from in my honest opinion, be it the 2ohm Mini or the HV Mini,,, you all can have your 306/510/901 i'll take all the Mini 801's OK...!!! The "I" MAN is unbelievable, I'm voting for him for president of the United States next election, Obama Who ? Issac your running the ship now so keep doing whatever it is your doing buddy, if you wake up at 5am have your coffee and vape and just think until 7am don't change a thing buddy, if your wearing your baseball cap on Saturdays and Sundays DONT TAKE IT OFF Brutha, Just don't change one thing because everything you touch is turning to gold my man, I have to tip my hat to you for bringing us this new winner of an Atty along with your dripping cartos I love those as well and need a few thousand, hahahahah Bless you Issac your the best, ya know, the more I think about it I have never heard not one bad thing about this guy, EVER !!,, has anyone ???? Issac you simply ROCK my man keep up the great job you do in the vaping community for all of us, you have definitely found your calling.!!!
I have to agree with that 110%. His atty's and carto's are the best ones I've ever used. Then when you think he's done I'll be darned if he doesn't come out with another one. I now have a whole bunch of obsolete cartomizers.
I have a quick question. Do drip tips such as the Super T tips work on these mini 801s? I thought I read somewhere in here that drip tips insert a bit too far into the mini 801s to let them seat properly.
I'm looking forward to trying a few LR mini 801s and just thought I'd ask.
I'm looking forward to trying a few LR mini 801s and just thought I'd ask.
No they don't. But they work beautifully with the Semi 801 which is just a little bit longer.
Actually it does fit and past the rubber o ring but wont snap into place and go all the way down Vaporologist, doesn't make for a good tip in any case though. heck I love the stock soft tip these Minis come with and I actually have no issue with just pulling it off and dripping 8 drops into the Atty and putting it back on
Ok you guys have gotten me intrigued about this HV mini 801....order placed. I'll let you know how it goes.
Hey MW,
I have the 801 Minis LRs and they are great. Just ordered the HV mini 801. Do you know what the differences might be between the two attys?
I have the 801 Minis LRs and they are great. Just ordered the HV mini 801. Do you know what the differences might be between the two attys?
Ohms are different of course 2 ohm to 3.5 or so and the bridge of the Atty is about 1 mm lower then the last batch from the top rim of the Atty
IKV HV 801 3.5Ω Mini Atomizer (Recommended for 5-6V volts)
IKV LR 801 2.0Ω Mini Atomizer (Recommended for 3.4-4.2 volts)
There is the difference. The Hv is 3.5 ohm meant for 5-6V volt vaping and the LR is 2.0 ohm meant for 3.4-4.2 volt vaping.
Last edited:
I don't see this 801 2.0 mini on the site...
I see a 2.5Ω semi, which is probably what I'm looking for anyway...Any write-up on this one?
Careful Blazer, we have 2 types of the 801 2.0's
Thanks for pointing this out....I'm thinking i want the 2.5semi to try.
- Status
Similar threads
