The B.F.D. Cart Mod

[Scottbee]

Thats about what im getting. But i was pulling in a lot of ait and wasnt getting that resistance when i was pulling it...so i took out the dart today and am running it with just foam.

What type of cart filler you are using should have little or no effect on the "draw" (inhale resistance) of the PV.

The exception would be if the filler is allowing so much liquid into the atty that it is becoming over-saturated and "clogged". Then the draw will get harder.

 

[Pete54]

How do you think we could use this on pen carts? I am trying to figure it out right now with not much luck. Any suggestions? Mesurements?

I'm sorry but I've never used an 801 style cart. Hopefully someone else has tried this on an 801 and will respond.

 

[DMertz99]

How do you think we could use this on pen carts? I am trying to figure it out right now with not much luck. Any suggestions? Mesurements?

Since the opening on my DSE801 cart is about twice the size of my 901, I'm going to double the deminsions (lengthwise) and fold it in half. Should probably increase the width by about 20% too. I'm using a larger straw (3.5mm) so it should fit OK. I use an 801PT at work - will try later today.

 

[robl45]

can someone tell me where I get the stirrer? I looked at walmart and only found coffee stirrers, I went to burgerking, but they are 3mm and not 2mm so they get stuck in the cart. right now I have the spring mod with blue foam on the top and I'm sucking up way too much liquid although it works great when it works. really need to do this mod.

 

[GoodDog]

can someone tell me where I get the stirrer? I looked at walmart and only found coffee stirrers, I went to burgerking, but they are 3mm and not 2mm so they get stuck in the cart. right now I have the spring mod with blue foam on the top and I'm sucking up way too much liquid although it works great when it works. really need to do this mod.

I picked up a few red 2mm at McDonalds.

 

[harpo]

Got mine at Target.

 

[robl45]

I picked up a few red 2mm at McDonalds.

and they fit fine? I will try to look for them there, the BK ones were definately too big.

for the person that found them in target, where were they?

 

[harpo]

and they fit fine? I will try to look for them there, the BK ones were definately too big.

for the person that found them in target, where were they?

I believe where the paper plates, cups etc......are.

 

[robl45]

I believe where the paper plates, cups etc......are.

yea I looked there are walmart, no luck,, I will check mcdonalds and target.

does this mod work well? I'm kinda getting sick of sucking up liquid.

 

[KM90]

Thank you so much. I was about ready to give up on my 510. I have tried every cart mod on this site and this is the only one that has worked right. No leaking, waiting between draws, shaking to get it to wick and especially no more bad atty taste. It is now consistent and dependable.

 

[rave]

I had absolutely no luck finding coffee stirrers at our Walmart; HOWEVER, in the alcoholic beverage department there are 2mm cocktail stirrers that are perfect. They are in clear upright plastic packaging and are black in color. Tough to spot even looking right at 'em.

BTW I've been using this mod for over a week and it's better than anything else I've tried so far (and I've tried most lol).

 

[harpo]

Yeah it's good to the last drop.

 

[Pete54]

I've found stirrers that are the right size in red, black and white with a red stripe. Now I'm color coding them where the red ones are for HV mods. Those I trim down a bit on the sides so that they wick a bit faster. Once you get the hang of it, it's really quite easy to judge how much "wick" you need for your juice's thickness and the voltage you use. Anyhow, It really does my heart good to hear that others are having the same success as I am with this. It so nice not to have to drip every 5 puffs!

 

[andyclifford]

I'm new to the forum and ecigs, but tried this mod tonight and works a treat. I couldn't find any stirrers, but for anyone else stuck, I cut up a cotton bud and the stick is hollow, just the right size and works perfectly. Thanks for the info on the mod.

 

[harpo]

I'm new to the forum and ecigs, but tried this mod tonight and works a treat. I couldn't find any stirrers, but for anyone else stuck, I cut up a cotton bud and the stick is hollow, just the right size and works perfectly. Thanks for the info on the mod.

For those of you who don't know what a cotton bud is it's a Q-Tip.

 

[GoodDog]

I was having trouble until I pulled the blue foam out of the straw a bit. I don't think I had enough coming out the top and it was hard to draw. I thought it stopped working again but when I took it out it was completely dry and there was no juice left in the cart. Seems to be working much better!

 

[Jeremy386]

yea I looked there are walmart, no luck,, I will check mcdonalds and target.

does this mod work well? I'm kinda getting sick of sucking up liquid.

I got my straws from Bev-Mo. Got more than I will ever need, was a pack of 200 straws. PM me, I'll put some in an envelope to ya if you can't find any.

-Jeremy

 

[UberDuper]

I finally got around to trying this tonight. Pulled out the blue foam, gave it an evil eye, and whipped up a couple darts. They flood just a little bit when I first put the cart on the atty but I just vape right through that and it's smooth sailing till they're empty. I may have the straws just a hair too long.
A good flowing cart is so much better then dripping.
Drip drip vape vape vape eeeeew drip drip vape gurgle shit!

UD.

 

[IdolLurker]

I finally got around to trying this tonight. Pulled out the blue foam, gave it an evil eye, and whipped up a couple darts. They flood just a little bit when I first put the cart on the atty but I just vape right through that and it's smooth sailing till they're empty. I may have the straws just a hair too long.
A good flowing cart is so much better then dripping.
Drip drip vape vape vape eeeeew drip drip vape gurgle ....!

UD.

I made the blue foam wedgie like in the pic and tried the straw with my 510 but was getting juice coming out of the tip too much. Took out the straw and repacked the wedgie and I haven't had the juice problem since. This was a big fix for me and for the first time am actually enjoying dripping. I still have to reload more frequently perhaps but the atty gets hot anyhow. I am loving the wedgie! Hah.

 

[DWTaylor]

anyone try this on a l88b cart?? I just can't find a good mod the ptb is like 10 puffs, poly is junk.