~The Billet Box~ page 1559 continued...

[LittleBird]

Received the doggy this morning. Seems fine so far. Did a couple of SS 3.5 builds with rayon. The juice holes seems to be 4mm. I used the smaller MTL chimney but left the large airflow pin that comes as stock. Airflow is restricted by the BB air slots. Without the cover it's an airy draw.
My Dober doggy:
View attachment 622955
Compared to a Subtank mini rba:
View attachment 622953
The 3 chimney sizes. From top MTL, Stock, BB racing.
View attachment 622957

Thanks for posting this! It's such a teeny little velocity-style deck

Perhaps this is a dumb question, but that's never stopped me before! Does it come with an Allen wrench, or does it use a standard size?

Already got a shipping notice. It arrives Monday.

 

[smokewell]

Only comes with one spare screw and some orings. It's a tiny slot. Need a small thin tip screwdriver or a sharp knife

 

[DPLongo22]

This one's for Gneezy (posting in multiple spots). You're almost at the finish line, dude!!! Hang in there - we're thinking about ya.

 

[Uncle]

Before the Weekend starts and the "Boxers/Boxettes" get too busy . . .

To All "My" ECF Friends here - I want "You" ALL to know No Matter What "You" Personally Celebrate this Month of Holidays - Be It . . .

​

​

​

The Best of Winter Solstice - the Longest Night of the Year . . .

​

​

​

A Great & Bright Chanukkah . . .

​

A Very Merry Christmas . . .

​

​

A Celebration of Kwanzaa . . .

The Meaning of Kwanzaa



I would "Like' To Pass-on To "You" and Yours"
The Best This Holiday Season Has To Offer . . .

Comfort - Light - Happiness - Good Fortune


AND - May Everyone "You" Know
Have A Joyous and Prosperous

 

[kas122461]

Merry Christmas Billet Boxer's



KAS

 

[Kh888]

Happy Holidays to All!

 

[HBcorpse]

What I'm up to today:

Murray Christmas!

 

[Fullknight]

Merry Christmas to everyone!!


Sent from my iPhone using Tapatalk

 

[gnees]

 

[HBcorpse]

 

[Uncle]

Although it has already been posted elsewhere . . .
Without-a-doubt it absolutely bares repeating here . . .

To YOU

TO YOU

" @Krisma "

To YOU


NOW - Remember to

ALL OF THEM . . .

SO I DID . . .


Just Sayin' . . . ​

 

[RickCain]

Santa brought a present that might make some fun!

Now if the clear door turns out I'll be amazed..

Sent from my SM-G935T using Tapatalk

 

[Uncle]

Santa brought a present that might make some fun!

Okay - It looks like it is a machine of some type . . . However what is it exactly ? ? ?

 

[HBcorpse]

Santa brought a present that might make some fun!

Now if the clear door turns out I'll be amazed..

Sent from my SM-G935T using Tapatalk

Okay - It looks like it is a machine of some type . . . However what is it exactly ? ? ?

3D printer!

Can't wait to see that clear door Rick!

I've contemplated having a friend making me a clear plexiglass door for one of my Rev-3's...

 

[kas122461]

KAS

 

[Fullknight]

Happy New Year Everyone!

Sent from my iPhone using Tapatalk

 

[Uncle]

To "DD" & Family and All Boxers/Boxettes Everywhere . . .

​

As Always Sending . . .

"GOOD VIBES" & "Healthy Thoughts"​

To One & All . . . ​

AND - While "We" all have an uncertain future ahead of "Us" - I hope that all you seek will come to "You" & "Yours" during the coming year . . . Cheers

 

[LittleBird]

Happy New Year, all!

I built the Atmystique Doggy, this morning, and wanted to share my thoughts.

As expected, the atty is beautifully machined. The two velocity-style posts are slightly offset: one lead comes from above; the other, from below. A 3mm ID coil is a bit smaller than the diameter of the wicking holes on the side of the atty, and works perfectly. I built to 1.17 ohms (9 wraps, 26ga kanthal) and had no issues mounting the build or attaching the standard top cap. I did use cotton bacon for wick - rayon might be tough; I'm not sure how one might thin the tails enough for rayon to wick properly

There are 4 holes on the airflow controller that allow one to vary af considerably. I closed the af to half on each. Using the standard combo (not the MTL top cap), this resulted in a restricted lung hit draw - a bit airier than a stock kangartech coil. I suspect the MTL combo will significantly reduce airflow, for folks who like a tight draw. I'll try it when I refill the juice and will report back.

This little atty rocks!

 

[HBcorpse]

Happy New Year, all!

I built the Atmystique Doggy, this morning, and wanted to share my thoughts.

As expected, the atty is beautifully machined. The two velocity-style posts are slightly offset: one lead comes from above; the other, from below. A 3mm ID coil is a bit smaller than the diameter of the wicking holes on the side of the atty, and works perfectly. I built to 1.17 ohms (9 wraps, 26ga kanthal) and had no issues mounting the build or attaching the standard top cap. I did use cotton bacon for wick - rayon might be tough; I'm not sure how one might thin the tails enough for rayon to wick properly

There are 4 holes on the airflow controller that allow one to vary af considerably. I closed the af to half on each. Using the standard combo (not the MTL top cap), this resulted in a restricted lung hit draw - a bit airier than a stock kangartech coil. I suspect the MTL combo will significantly reduce airflow, for folks who like a tight draw. I'll try it when I refill the juice and will report back.

This little atty rocks!

Pics or it didn't happen!
:wink:

 

[LittleBird]

Pics or it didn't happen!
:wink:

Just for you, darlin'