~The Billet Box~ page 1559 continued...

[Hobbs]

^^^ I have the smallest standard airflow insert (2mm) in the Vapeshell. Notice the large oblong airflow opening in the bottom of the Vapeshell which goes all the way through the bottom post ... and the small drilled airflow opening in the bottom post of the Crossbow which only goes through one side.

Without actually measuring, the inside chimney diameters appear to be the same.

 

[Hobbs]

SOooo, given these rba's, what's in the Billet Box today ??

Yep, a Comfort Bridge with a 1.8ohm Nautilus

 

[hobbes4]

The crossbow tiny deck is very tempting but man I just can’t at that price.

 

[DPLongo22]

SOooo, given these RBA's, what's in the Billet Box today ??

Yep, a Comfort Bridge with a 1.8ohm Nautilus

Same as always! 4-5 years, $34, a BVC coil, and still going strong as ever!!!

If'n it ain't broke...

 

[Susaz]

Maybe after repeated use, the Vapeshell halves will wear enough to encounter the same circumstance? ... but out of the box at least, (my) Vapeshell halves snap together and stay together when installed in the boro and whenever the boro is removed or swapped. The/(my) Crossbow halves just fall apart when held in the hand.

I've used Atmizoo things in the past. They're finely made, if that does happen it'll take a very long time.

The crossbow tiny deck is very tempting but man I just can’t at that price.

I can, but I just won't. Svoemesto, lower your prices.

 

[Susaz]

SOooo, given these RBA's, what's in the Billet Box today ??

Yep, a Comfort Bridge with a 1.8ohm Nautilus

What is that color? Grrr, I've bought a lot of things but not yet a BB because I'm waiting for the right colour, maybe SS or Dirt, or this one.

 

[Susaz]

SOooo, given these RBA's, what's in the Billet Box today ??

Yep, a Comfort Bridge with a 1.8ohm Nautilus

Sorry, no, that's the SXK? I was fooled for a minute. I'm learning a lot guys! Thanks!

 

[TheSneakerHoarder]

Unrelated note: anyone else notice the decreased quality and taste in "premium" juice over the last year? Usually DIY but I've been in a lazy 6 month kick and I'm having a very hard time finding anything worth buying more than once.

Sent from my SM-G935T using Tapatalk

 

[DPLongo22]

Unrelated note: anyone else notice the decreased quality and taste in "premium" juice over the last year? Usually DIY but I've been in a lazy 6 month kick and I'm having a very hard time finding anything worth buying more than once.

Sent from my SM-G935T using Tapatalk

I buy a few, but I'm not sure if they'e be considered "premium".

1. MyFreedomSmokes' juice has degraded substantially. I have no idea why, but some of it is now unvapable
2. Naked LavaFlow is still fine
3. Everything from The Vapor Room is still extraordinary
4. I'll miss NLV forever

It doesn't surprise me though that we're seeing some downturn. The entire industry was thrown on its head by a government that can't seem to remove theirs from some lower orifices. NOBODY should be out of business in the vape industry, unless it's by choice.

Sadly amazing, at the very least.

 

[Katdarling]

I'll miss NLV forever

<---------, too.

 

[Bamrz]

I still have a small stash of NLV, guarding it with my life!

Edit to add: It's a stoopid high nic mg though It was purchased when we had much less efficient equipment!

 

[DPLongo22]

I still have a small stash of NLV, guarding it with my life!

 

[Katdarling]

Bamz!

 

[oplholik]

Just curious, but what is this NLV that you speak of?

 

[DPLongo22]

Just curious, but what is this NLV that you speak of?

Gone, never forgotten. Simply marvelous.

https://www.pvliquids.com/

 

[oplholik]

Ok, I'd never heard of them.

 

[DPLongo22]

Ok, I'd never heard of them.

They were a pretty well kept "secret".

I stocked up before they went out, but my supply of minis is beginning to show spottiness. They're only available in a handful of B&Ms, and none in my area.

(sigh)

 

[kas122461]

I have officially retired my Vape Shell, it just does not work for MTL vaping. I think it is mainly because of the huge juice holes in the bottom of it. If I build my usual coil, on a 3/32" drill bit, I can't get enough cotton in it to stop it from leaking. The flavor is there but it leaks everywhere, if I build a larger coil to get more cotton in it to stop the leaking, then I get no flavor. So once again back to the Classic Bridge and aspire coils. I am tired of fiddling with this thing. The other one (crossbow) looks like it would work better for me, but if it is $175.00 USD then I just cant afford that. My .

KAS

 

[HBcorpse]

I have officially retired my Vape Shell, it just does not work for MTL vaping. I think it is mainly because of the huge juice holes in the bottom of it. If I build my usual coil, on a 3/32" drill bit, I can't get enough cotton in it to stop it from leaking. The flavor is there but it leaks everywhere, if I build a larger coil to get more cotton in it to stop the leaking, then I get no flavor. So once again back to the Classic Bridge and aspire coils. I am tired of fiddling with this thing. The other one (crossbow) looks like it would work better for me, but if it is $175.00 USD then I just cant afford that. My .

KAS

For the “go-to” build:
Can you tuck a surplus piece of cotton on top of the juice holes, and tuck the ends of your wick into that?

 

[kas122461]

For the “go-to” build:
Can you tuck a surplus piece of cotton on top of the juice holes, and tuck the ends of your wick into that?

I have not tried that, I don't really feel like trying it right now though.
Thanks for the suggestion.

KAS