The " BUZZ " VariVolt Pv's coming SOON !
- Thread starter BuzzKill
- Start date
- th_trl_thread_readers 0
- Status
ROFL Since getting the Buzz the IPad has now moved to the top of my list!!!
I may be old but I love gadgits, especially electronic ones! Plus I'm so 22nd century, I only shop online, I very rarely if ever go to an actual store and buy something in person LOL Hubby does the grocery shopping so that saves me from having to go to a store that way too.
Man you have him TRAINED ! LOL
I shop online now too , it's so easy it's ridiculous .
I was at the bar the other night and this guy had an I Pad , what a cool device !! I want one and I dont even need it ! but very cool .
I started on computers in 1978 so I have seen the evolution throughout , AMAZING is all I can say , My bass player has a Droid phone and that thing is crazy !
I think it will be my next phone , then you guys can post and I can check while I'm out LMAO !! ( like I need to do that ! )?
I shop online now too , it's so easy it's ridiculous .
I was at the bar the other night and this guy had an I Pad , what a cool device !! I want one and I dont even need it ! but very cool .
I started on computers in 1978 so I have seen the evolution throughout , AMAZING is all I can say , My bass player has a Droid phone and that thing is crazy !
I think it will be my next phone , then you guys can post and I can check while I'm out LMAO !! ( like I need to do that ! )?
Oh he's not trained LOL When I go to the store we spend 3 times the amount on groceries than when he goes by himself. I'm bad about impulse buys and falling for cool looking displays. It is more I'm trained not to go than it is he's trained to go.
BuzzKill said:
Don't do it, man! ECF is addictive enough: if you get access via your phone, you'll be here all day long!
(Posted via my iPhone, while in bed, when I should be sleeping)
Just wanted to let people know if you're out and about and need to change the voltage this is what I've found. Each complete turn of the adjustment screw equals .2 to .25 volts. So if you don't have a multimeter use this as a rough guide.
Received my buzz on Friday and been using it ever since. I use it with 510, 901, 801 and 510/808 cartos. This thing is amazing. No more changing batteries on the go just make small adjustments and you're good to go for whatever atomizer or atomizer you fancy at the moment. Great job Mike. I look forward to the VVPV.
Received my buzz on Friday and been using it ever since. I use it with 510, 901, 801 and 510/808 cartos. This thing is amazing. No more changing batteries on the go just make small adjustments and you're good to go for whatever atomizer or atomizer you fancy at the moment. Great job Mike. I look forward to the VVPV.
Nice info..
I'm waiting for my Buzz to be delivered (tomorrow, it seems), but I'm curious about one thing when using it with 510 cartomizers:
I myself have a bit more 'juice leakage' issue with 510 cartos than I do with any of my other atomizers, and they are my atty-of-choice these days. I typically have to clean off the top of my Prodigy V2's 801 adapter a few times a day to remove juice that's made its way all the way through my 801 -> 510 adapter and onto my Prodigy. Anyway, I'm a little worried that by not being 100% sealed, I may run into problems with juice getting into the Buzz's PCB 'guts'. Having used the Buzz yourself with 510 cartos, do you see any potential threat there?
I just don't want to be frying electronics down there. My Prodigy is mechanical, so it's not at all concerning. I just want to make sure I can keep my Buzz dry and happy for the long term. ;-)
Thanks!
I've been using it for a couple months and I use alot of 510 cartos. I've never had a problem of it leaking into the Buzz. There isn't an open hole there, it's a screw that if you reallt tried you might get juice into it but I wouldn't worry about getting it in at that spot.
If you are really worried a small amount of silicon can be put around the screw and between the brass connector this will SEAL it ( hell I need to look into this ? )
I measured some Juice the other day and it is NON conductive !! so even if it gets in there it will not short things out.
Do me a favor IF you have a ohm meter put a drop of your juice on a piece of paper and measure the ohms of it ( dont touch the leads together but put them both in the drop. )
Thanks guys
I measured some Juice the other day and it is NON conductive !! so even if it gets in there it will not short things out.
Do me a favor IF you have a ohm meter put a drop of your juice on a piece of paper and measure the ohms of it ( dont touch the leads together but put them both in the drop. )
Thanks guys
No issue at all for me. I just can't see juice getting in there.
Thanks, guys. But if there's an opening there, I'm pretty sure that juice will eventually get in. I'm just hoping that the effects of it getting in there are inconsequential. ;-)
Its just enough to let the center post rotate , maybe .005" of an inch . If you have any problems or want to just seal it go for it .
If juice can get in there I'll find a way, but so far it hasn't and I've had juice all over the place LOL.
11 days and still as fantastic as ever!! No problems at all!!! I've pretty much settled in with a 302 atty at 4.6 volts. Though I just received a 306 atty that I'm thinking of trying on it too. I'm just so happy with the way the 302 is working that I hate to mess with a good thing.
As soon as hubby makes up his mind on what color he wants I'll be getting a second one
Happy Vaping!
11 days and still as fantastic as ever!! No problems at all!!! I've pretty much settled in with a 302 atty at 4.6 volts. Though I just received a 306 atty that I'm thinking of trying on it too. I'm just so happy with the way the 302 is working that I hate to mess with a good thing.
As soon as hubby makes up his mind on what color he wants I'll be getting a second one
Happy Vaping!
What happens if you accidentally unscrew the top cap off? Will it mess up anything? I had connected a 510 adapter on it and when I remove the atty to replace it, the whole cap started to unscrew itself, caught it in time and re tightened it but was wondering if this will do harm to the unit?
I got my Buzz yesterday, but the 3.7v charger's fuse popped 2 minutes into charging my first set of Ultrafire 880mAh 16340's. So, I can't use it yet. Ugh. ;-)
Anyway, even though all research points towards this being a terrible idea, I'm toying with trying to charge these Ultrafire's in one of Tenergy 3.0v LiFePO4 chargers. Does anyone have any experience with trying this? I'd love for you to talk me into - or out of - giving it a shot!
Anyway, even though all research points towards this being a terrible idea, I'm toying with trying to charge these Ultrafire's in one of Tenergy 3.0v LiFePO4 chargers. Does anyone have any experience with trying this? I'd love for you to talk me into - or out of - giving it a shot!
I did something similar by mistake. The battery was too big, and when I popped it into the charger, the positive contacts broke away from the charger housing. Now it's in a landfill somewhere.
- Status
