The Darwin From Evolv!!!

[Sewknitty]

No way, Kris...Drew sells doublers? Why didn't I notice these before...? The site says they're 'consumable', which is encouraging. Do you add this to juice or vape as 0 nic juice?

Cuse, that's a fine set of fraternal twins you got there, good buddy! Seems like it didn't take you long to get the second one...am I right? I know you love all your 'kids' the same but which of these two could nudge the other aside to be a slight favorite? By the silence and heavy vapor hanging over the thread I think I can go ahead and get my back-up Darwin guilt-free next time Drew has a batch.

Drew, about when will that be, kind sir?

 

[Krisb]

Since he sent me the sample of the hv along too, I've been mixing the two together. But, I do have a bottle of 48mg nic, and just ordered a bunch of DIY stuff to start on trying to actually save with this hobby, lol.

As far as getting a 2nd Darwin, I thought about doing that, or getting a provari. Also thought about waiting to see if evolv comes out with another mod. Too many options and kinda stuck in indecision.

Sent from my ADR6300

 

[Sewknitty]

Since he sent me the sample of the hv along too, I've been mixing the two together. But, I do have a bottle of 48mg nic, and just ordered a bunch of DIY stuff to start on trying to actually save with this hobby, lol.

As far as getting a 2nd Darwin, I thought about doing that, or getting a provari. Also thought about waiting to see if evolv comes out with another mod. Too many options and kinda stuck in indecision.

Sent from my ADR6300

I gave up on saving but you hang in there, Kris, and maybe one of us will!

And, yeah...I'm sorta stuck there too...I love not having to buy batteries or think about attys but I know for sure they're up to something in the Evolv Lair...I just feel it. I found a box mod that takes 2 18650's that I can add to my doomsday packing list and may just hold there to see what they come up with next. And, let's just be nice to each other now because, whatever it is, I'm going to be elbowing all of you aside to lay hands on it!

 

[Krisb]

Lmao, SK! And I agree, no buying, changing, charging batteries is amazing!!! Drove me crazy with my gg.



Sent from my ADR6300

 

[cuseguy]

I gave up on saving but you hang in there, Kris, and maybe one of us will!

And, yeah...I'm sorta stuck there too...I love not having to buy batteries or think about attys but I know for sure they're up to something in the Evolv Lair...I just feel it. I found a box mod that takes 2 18650's that I can add to my doomsday packing list and may just hold there to see what they come up with next. And, let's just be nice to each other now because, whatever it is, I'm going to be elbowing all of you aside to lay hands on it!

Not if I get my hands on it first! Yeah SK, got this ProVari in 13 days! They are cranking them out right now. I am looking at some sort of box mod next...maybe the Eclipse, maybe a Monkeyboxx VV. Not sure really...We'll see what pops up. I'm pretty content for now and I have to sit back and pay some bills for a couple of weeks anyway after my recent and ongoing spending spree!

 

[Liv2Ski]

Not if I get my hands on it first! Yeah SK, got this ProVari in 13 days! They are cranking them out right now. I am looking at some sort of box mod next...maybe the Eclipse, maybe a Monkeyboxx VV. Not sure really...We'll see what pops up. I'm pretty content for now and I have to sit back and pay some bills for a couple of weeks anyway after my recent and ongoing spending spree!

Come on we have a deal on the Eclipse. Monkeyboxx is good to go though. Will let you try the REO. VV Boxx sounds nice though and I thing you should have the carzy monkey lazer etched into since I did not see a cowbell in the list of available graphics!

 

[Bootsand]

Just popping back in this thread to state that I'm still loving my Darwin I fully have a handle on using the vapemate on it now, no almost no leakage issues.

mad <3, Evolv.

 

[Krisb]

Hey, boot! Still loving mine, too. Wish I had this from the beginning! Home with a cold today and all the ego fans are killing me on the noob threads, no wonder I tend to avoid them!

Sent from my ADR6300

 

[VAPlN']

Hey SK! Long time and all that....So when it gets boring and ho hum, time to go PV hunting! looky what showed up today (the one on the right) I know you don't like Varis but they are not boring or ho-hum...

Heya cuse... tell me about those MAPs that you have on your provaris in that pic. Is the atty integrated on them? I don't see one between the mod and the tank. How well do they work? Do they leak at all? As well as any other thoughts you might have on them?

I'm going to pick up a Darwin and I'm looking for something low maintenance to use for my longer vaping sessions. I'm thinking I might get just plain worn out or develop tennis elbow from having to keep squeezing a juice bottle into the atty with something like the Darwin. lol

 

[Krisb]

Vapin, the map tank is awesome. It uses a ce2 xl innard inside the tank that is replaceable. They are hand made, so sounds like there are some that are tighter than others. Mine is pretty tight so I have a pretty hard time taking the ce2 out without damage for cleaning. I'm getting the gang of it though. I have never had an issue with leakage, but I also don't lay mine on its side like some have said they do when they experience leaking. I put up a pic on this thread a few pgs back of how I keep my Darwin/map when not in my hand. A trick I read about somewhere is when you take the tank off, use a prescription bottle for storage. This works great, keeps it upright and I can store it with juice in it with no problems.

Sent from my ADR6300

 

[VAPlN']

Thanks Krisb. I'm dying to try one. I was kind of waiting to get a Darwin ordered before ordering one. I have a Prodigy 3.1 I could use it on, but wanted to save it for the Darwin. Then they all sold out at COV. So now I'm waiting for those to come in too. lol I think I may be lightly cursed.

Which of the MAPS is best on your Darwin? I'm hearing the 3.2 ohm and that it runs great at about 5volts. I know it can accommodate any of them due to the wattage adjustment capability. But I read that the 3.2's at about 5v produce the best taste/vapor combination.

Are you having to run a 510 to 510 charging adapter on the Darwin to run the MAP with it? Looks like it would be a tight fit.

 

[Krisb]

The Darwin will come with the needed 510-510 adapter, so no worries there. The 3.2 MAP would be best because it would cover you with a wider range. I'm using a 2.8 because that is what I already had in my map and it works fine. I would say if you want a darwin and map, don't wait to be able to get both, order as you see them in!!! Jump and jump fast, LOL Only issue I have with my MAP, as others have also mentioned, is that about halfway down they don't seem to wick overly well. I tilt mine a bit and it helps, but I'm going to jump on a mini MAP as soon as I see them in because I think that would help that issue, less length to wick and all. I may be seeing that the wrong way, but makes sense to me

 

[VAPlN']

I read the same thing on the mini's on one of the other threads. I think you're on the right track.

Thanks for the info. Much appreciated.

 

[Krisb]

No prob....as long as you don't jump in front of me in line for a mini...lmao, j/k

 

[VAPlN']

I'll be watching for the Darwins first and foremost. I like my Prodigy just fine. But, I'm just dying to try watt stabilized vaping for myself. I'm sure you'll beat me to the tanks. I haven't had much luck getting there in time thus far. I've seen a few for sale and/or trade on the threads. I just am not that desperate to get one (at least not yet).

 

[Krisb]

Granted, I only own a ggtb and an ego type pv, but ill say I can't imagine a vape better than I get with the Darwin. Shouldn't be too long of a wait for you, heard there'll be more in stock very soon.

Sent from my ADR6300

 

[VAPlN']

Exactly what I wanted to hear. It's like waiting for Christmas when you were a kid. I still have to go through the whole "stalking the mailman" thing, even after I finally get one ordered.

 

[Krisb]

He ships out quickly, too, so didn't take long to get at all, great seller!

Have you gotten into DIY juice? I'm waiting for my first DIY stuff to arrive now.

Sent from my ADR6300

 

[VAPlN']

Other than blending a few flavors and nic strengths. No. I have about 30 6ml's from sample packs and another dozen or so 15ml's from some of the more popular gourmet vendors that I'm switching back and forth from right now.

I'm still developing a favorite type and flavor and blending nic %'s to see what strength works best with different types of flavors. I would imagine that I will go down that road soon though. Probably buy a few more pv's and accessories first though. I want to build up the hardware a bit, before I get too deep into the juicemaking and figure I need some time to develop my tastes first anyway.

I only have three pv's and three different atty/carto types at this point. So, I probably need some more experimentation there too.

So far my Prodigy 3.1 with BE112 SR's at 6 volts is my favorite.

 

[OC513]

Probably buy a few more pv's and accessories first though.

No need to once you buy the Darwin....it is the best device I have ever used by FAR. I have a feeling you will love it. Easy to say as it is just so damn adjustable.