The Darwin From Evolv!!!
- Thread starter Drewsworld
- Start date
- th_trl_thread_readers 0
- Status
We got in a real bad argument over them when he first tried to get me to try them. Take that I had quit for a couple weeks cold turkey.
We both had good points and neither would give in.
He just kept hinting around and got me to try them and it snowballed from there.
Yea he is a great son.
Everyone that I have meet here where I live that vape now links back to him.
I wanted to win the Darwin for him. He wants one but has to have some major dental work done and can't afford one right now.
We both had good points and neither would give in.
He just kept hinting around and got me to try them and it snowballed from there.
Yea he is a great son.
Everyone that I have meet here where I live that vape now links back to him.
I wanted to win the Darwin for him. He wants one but has to have some major dental work done and can't afford one right now.
In a nutshell. Great summary and especially the part about the screen shutting down. Learned my lesson after the murder. Do not poke the bear. Unscrew the doggone whatever and move on. is tattooed on my brain now.
Love your blog, Angus! I have no luck so...do you have candy?
Ohhh, Drewwww....you are killin' me, man! I already have an order of Big Gulps on the way...a warning would've saved my old post man, who no longer smiles at me because he has to get out of the truck now when he gets to this vaper's mailbox. Like an idiot I'm going over to take a look.
And, looks like these 306s are the ISH...
I can't just order a couple attys but they're in my cart. Have already gone through a pack of the 510 megas so won't be long before I'm trying these out. I had no idea there were that many versions of 306s. These are gonna be awesome...I have that feeling.
I'm glad you lost that argument, lowboy. Very nice tribute to your son.
Want some candy, little girl?
You'd think I'd have learned by now...when Angus is in a thread do not take a swig of coffee before reading his posts.... Off to get some paper towels!
LOL, SK. I KNOW that feeling all too well. I'm the Kween of coffee spit-takes!
I want candy...
I want candy...
Question? Why do you see, in the classified section, people stating not to mention nicotine or electronic cigs in a Paypal transaction? I do not have a Paypal account but it gives me the feeling that I am doing something illegal or wrong.
I didn't know where to post such a Noob question but figured since I was a Darwinian I would present it to the most knowledgeable folks here.
I didn't know where to post such a Noob question but figured since I was a Darwinian I would present it to the most knowledgeable folks here.
Pay Pal has outlawed the sale of Ecigs or Nic products through their web portal and reserves the right to seize your money and the person selling these products. It almost never happens on these kind of transactions but Pay Pal has seized monies from several vendors (including me) and held their money up for 180 days before returning it.
Hope that helps....
Drew
Hope that helps....
Drew
Thanks a lot Drew for the info. I hadn't realized they were against such transactions. BTW, I am really enjoying my Darwin. I ordered it on April 1st and was shocked at the time to see them in stock. At first I thought it was an April fools joke! But I was in for a treat when it showed up in the mail on Monday the 4th.....
Your Welcome...I was actually away from home and my wife got me with one of the best April Fools jokes EVER. She told me the Darwins arrived and they were all broken and asked why Sean put them up on the site if they were all broken!!!!
She actually got me the day before and said it was an early April Foools joke!!! I was crushed...
Im thinking up next years already...
Drew
She actually got me the day before and said it was an early April Foools joke!!! I was crushed...
Im thinking up next years already...
Drew
Ahh, the best April Fool's pranks are the ones that are a year in the making.
Hi Guys,
I am a happy Darwin user for about two weeks. Today I started to see strange things:
The arm was quite loose from the first moment but now it feels to come off any minute.
The LCD sometimes turn off without any reason while the machine still fires and works.
Also if I accidentally push the LCD just a bit it turns off, but again the device is firing and even the backlight turns on.
I bought several new attys and tested them today. The 306LR which should be around 1.4 ohm reads 0.9 ohms on Darwin and puts out 3.6 amper current even at 4.2 watts! I also bought a 510LV which should be 2.2 ohms but the Darwin reads 1.5 ohm. Am I this pathetic tom have two bad attys on the same day?! (though they are working fine.)
Have any of you come across the above issues? Do you have a solution for these?
Thanks in advance!
I am a happy Darwin user for about two weeks. Today I started to see strange things:
The arm was quite loose from the first moment but now it feels to come off any minute.
The LCD sometimes turn off without any reason while the machine still fires and works.
Also if I accidentally push the LCD just a bit it turns off, but again the device is firing and even the backlight turns on.
I bought several new attys and tested them today. The 306LR which should be around 1.4 ohm reads 0.9 ohms on Darwin and puts out 3.6 amper current even at 4.2 watts! I also bought a 510LV which should be 2.2 ohms but the Darwin reads 1.5 ohm. Am I this pathetic tom have two bad attys on the same day?! (though they are working fine.)
Have any of you come across the above issues? Do you have a solution for these?
Thanks in advance!
It has been mentioned here by several people that the LR atties do not allow the Darwin to shine on it's range. The Darwin can only go as low as 3.6 to 3.7 volts no matter what atty is on it. It simply cannot go lower. The whole point of low resistance atties is to allow users with 3.7 volt devices to simulate high voltage vaping. This is totally unnecessary on the Darwin. If you want more heat you just turn up the dial. Adding to all of that is the fact that LR atties tend to burn out so much faster than standard. Sticking to Standard or even high resistance atties on the Darwin will really let it shine.
As for your loose arm, I would shoot an email to evolv directly. They will take care of that problem pronto.
LOL, you have to love the USPS tracking system...
I ordered my Darwin, along with some other stuff, this last Saturday, the 16th. Here's what the tracking currently shows:
Shipped on: April 6th, 2009
In the Scan History it shows Electronic Notification was received on April 18, 2011.
So, I guess I was the first one to have a Darwin shipped. Likely before the creators even had a prototype... I know the postal service can be slow, but that's over two years and I still haven't received the shipment.
I ordered my Darwin, along with some other stuff, this last Saturday, the 16th. Here's what the tracking currently shows:
Shipped on: April 6th, 2009
In the Scan History it shows Electronic Notification was received on April 18, 2011.
So, I guess I was the first one to have a Darwin shipped. Likely before the creators even had a prototype... I know the postal service can be slow, but that's over two years and I still haven't received the shipment.
Actually the reason for this (as told to me by my post office) is that the Postal service re-uses tracking numbers every 2 years. I have been noticing the same thing on many of my orders through several venders. It's definitely good for a chuckle.LOL, you have to love the USPS tracking system...
I ordered my Darwin, along with some other stuff, this last Saturday, the 16th. Here's what the tracking currently shows:
Shipped on: April 6th, 2009
In the Scan History it shows Electronic Notification was received on April 18, 2011.
So, I guess I was the first one to have a Darwin shipped. Likely before the creators even had a prototype... I know the postal service can be slow, but that's over two years and I still haven't received the shipment.
I haven't really talked much about juice or anything since getting back into PVs but figured if I'm going to share it with anyone might as well be in the Darwin thread.
Has ANYONE tried the Maple Frosted Rolls liquid from KBV? I've probably tried 10 juices with varying success since getting back in and this one tastes so good it hurts... no break in period or getting "used" to the flavor to enjoy it but I am LOVING every puff from puff one.
Just had to share.
Brandon
Has ANYONE tried the Maple Frosted Rolls liquid from KBV? I've probably tried 10 juices with varying success since getting back in and this one tastes so good it hurts... no break in period or getting "used" to the flavor to enjoy it but I am LOVING every puff from puff one.
Just had to share.
Brandon
Thanks, but if Darwin is not for LR why are so many people praising the 2.0 custom atty from Drew? 2.0 is not standard but much closer to LR...
The new 2.0 Drew has just started selling at least offers some wiggle room on the Darwin. Both of your other atties were quite a bit lower in the resistance area. It is possible that the 2 atties you were trying to use were reported at a higher resistance than they actually are. There has to be some room for a small variance with any atty/carto. Either way, the Darwin simply cannot deliver less than 3.6 to 3.7 volts no matter how low you set the watts to. Lots of people still love the LR atties and continue to use them on Darwin. You just get a lot more room to play with standard resistance. It is also possible that your Darwin has a glitch related to your loose arm.
- Status
