The Darwin From Evolv!!!

[debook]

Nice, panky. Need to do some batches myself, do the occasional all grain for Marzen or Dunkles but usually just partial mash since the extracts have gotten so much better the last few years.

Glad all is quiet and sane here, the forums are all ablaze with hate and discontent today. Is it a full moon?

 

[Katdarling]

Bit early, debook. There will be a Blue Moon in Pisces on the 31st.

 

[cos]

Hey Drew
Any news on availability of the Darwin from Brandon? whats up brutha? Thanks

 

[Crack3dOne]

So, speaking of the Darwin. i can not believe how long this battery lasts. All day at 9.6W with a 2.5ohm I06 or any boge 3.0ohm carto. I was going though two AW IMR batteries a day with my LT. A 2000mah and a 1600mah. I have a charger for the darwin at work and in my car as well at home of course. But I never have to use them. I just plugged it in at night and go.

And I vape a lot. I mean a lot. A whole lot! Am I getting my point accross yet?

A LOT

 

[lowboy]

Put my Darwin in the classies.
Do not reply on here about it.
I believe it would be against the rules.

 

[cerver7]

Put my Darwin in the classies.

GLWYS. Would love to buy but the wallet and wife are on strike until further notice

 

[LuV2SkRaTcH]

Pm sent about the Darwin!

 

[Filthy-Beast]

I just had to send the Darwin in for repair it would not charge, I think the USB port connection to the board broke. Anyway I was on the road with all my Ego backup batteries at home, The Darwin's been so rock solid I just quit carry anything else.

I was freakin, luckily I found a Vape shop only 1.5 hrs drive away and got a backup unit that day. They only had a N-Vary (lavatub) type device. It's not a bad little backup unit.

I went straight from Ego to Darwin and have never seen a Provari. What's the added value of one of those over the N-Vary, why pay 2 bills more is the question?

 

[LuV2SkRaTcH]

I just had to send the Darwin in for repair it would not charge, I think the USB port connection to the board broke. Anyway I was on the road with all my Ego backup batteries at home, The Darwin's been so rock solid I just quit carry anything else.

I was freakin, luckily I found a Vape shop only 1.5 hrs drive away and got a backup unit that day. They only had a N-Vary (lavatub) type device. It's not a bad little backup unit.

I went straight from Ego to Darwin and have never seen a Provari. What's the added value of one of those over the N-Vary, why pay 2 bills more is the question?

I went from the ego to a Provari, only because the Darwin wasn't in stock (still waiting).

 

[lowboy]

I still have one.
I will not sell or trade it.
I just wanted something else.

 

[jkmtwo]

I just had to send the Darwin in for repair it would not charge, I think the USB port connection to the board broke. Anyway I was on the road with all my Ego backup batteries at home, The Darwin's been so rock solid I just quit carry anything else.

I was freakin, luckily I found a Vape shop only 1.5 hrs drive away and got a backup unit that day. They only had a N-Vary (lavatub) type device. It's not a bad little backup unit.

I went straight from Ego to Darwin and have never seen a Provari. What's the added value of one of those over the N-Vary, why pay 2 bills more is the question?

Light years, but as a back up, eh......lavatubes have their flaws, but, for the price, and what it does get right, its not bad.

I know some are real big on the Vmax, but truth is, they jacked up the calibration or whatever, which made 3v feel like 4.2v or something, my first thought was, amidst all the idiots claiming this is a plus, if they got that wrong, as well as the amp limit, what on earth makes you think they got the supposed safety features right? The LT doesn't suffer from that problem.

 

[cos]

Lowboy geez man i wish i was home i would haVE gave you my provari plus some cash. dam dam dam. anyway guess i will wait for Evolve to make some. i dont understand why they arent producing them just doesnt make sense. unless something else in the wind, congrats whoever got lowboys darwin.

 

[doots]

Wonder if there will ever be more of them made. Evol doesn't say anything I can find about when there will be more made. They push the Kick. Nothing on the Darwin.. Soon.. Come on.. Nhaler said Real Soon months ago.. ???? Seems like there is a lack of communication to the forum on Darwins and.or availabilty or if they will ever be manufactured again.... Did I miss a memo? lol

 

[jkmtwo]

Aaaaahhh the natives a restless....lol

I think we will know when they have decided to stop making them, Nhaler would likely pull the info page from the site, and I would think Evolv would make it know if for no other reason than to shut us all up.

 

[Killjoy1]

Yeah, I gotta agree that if they had decided to stop making them we would have heard about it by now. It's probably more to do with issues of availability of parts or getting parts in a timely manner. Nowadays manufacturers in all walks of industry are doing everything they can to reduce their inventory on-hand and manufacturing only what they need to. The company I work for does it and it ticks me off to no end when the company policy is to use our bearings first, but it takes me a 16-18 week lead time to get something we make right there in-house . . . the same happens when I need OEM parts to repair a machine and the manufacturer can no longer just pull one off their shelf and send it to me, they make it to order instead. I'm sure some of Evolv's suppliers for electronic parts have implemented similar practices.

 

[Filthy-Beast]

It could also be a problem getting such a small run of the custom parts made.

This is just a wild guess, take it as such. Before every company right sized they had extra capacity and would welcome a small run, low margin job, like Darwin parts. Now they are sized to service orders of thousands of parts and the margin of a small run isn't worth the hassle. The Kick requires a lot less custom parts, it is a higher volume product and probably has a higher profit margin.

 

[jkmtwo]

My feeling is, just for what its worth, I think parts availability has been an issue, but I think there is something else happening, don't know what, but to me this smacks of a revision and trying to get it right prior to the roll out, again, just my 2 cents.

 

[LuV2SkRaTcH]

Maybe, when Evolv had an interview on the vapeteam's show (when the DNA was coming out) the parts weren't to spec, and had to be sent back and maybe had bad parts sent to them again.... And the long hiatus is due to finding a new manufacturer for those parts. I worked for a smaller sheetmetal shop where everything was rushed with other workers not doing as great as they should have... Causing the customer to constantly send their stuff back and eventually finding another sheetmetal shop lol!

 

[Allazar]

I know some are real big on the Vmax, but truth is, they jacked up the calibration or whatever, which made 3v feel like 4.2v or something, my first thought was, amidst all the idiots claiming this is a plus, if they got that wrong, as well as the amp limit, what on earth makes you think they got the supposed safety features right? The LT doesn't suffer from that problem.

To be fair on the original you are correct... in fact... it was outputting nearly 5 volts as a minimum on those first revisions... they did get it right after that and have gone through several revisions since. It DOES make you wonder just how much if any testing was done on them prior to release though!

 

[jkmtwo]

Correct, it kind of underscores, even more so with the telescope mod fiasco, why so many will only buy American made pvs. And like I said, saying it again, even more so after the telescope mod fiasco, if it has the safety features they claim. I'm not one to knee jerk that everything from china is crap automatically, Joytech seems to be a solid company, I'm huge fan of Boge cartos.

To be fair on the original you are correct... in fact... it was outputting nearly 5 volts as a minimum on those first revisions... they did get it right after that and have gone through several revisions since. It DOES make you wonder just how much if any testing was done on them prior to release though!