-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
- Status
I will never make any money as I just like my ideas to be scrutinized.
And I'm away from home again, for the next 12 days or so.
So no playing for me, all I can do is think, talk and vape.
Try this one in the brain storming mix
TWalkers thread is looking at precision liquid injection.
The Items chapstick, stick deodorant, glue stick, came up in conversation.
I'm not duplicating his great thread but what if these items were also used for atty retraction.
I work in construction and the atty on my mod is sticking out of the box.
I'm concerned I may break it, if I bend over and its in my pocket.
It would be nice to retract it within the unit, with all connectors still attached.
These items I think could do this
Opinions Please.
Petercro..........
And I'm away from home again, for the next 12 days or so.
So no playing for me, all I can do is think, talk and vape.
Try this one in the brain storming mix
TWalkers thread is looking at precision liquid injection.
The Items chapstick, stick deodorant, glue stick, came up in conversation.
I'm not duplicating his great thread but what if these items were also used for atty retraction.
I work in construction and the atty on my mod is sticking out of the box.
I'm concerned I may break it, if I bend over and its in my pocket.
It would be nice to retract it within the unit, with all connectors still attached.
These items I think could do this
Opinions Please.
Petercro..........
What about the foldover atomizer type idea of the Sidewinder? I forget who created it at the moment, but it seemed like a great idea.
Thanks for the input.
I have considered that but the liquid feed tube may be a little hard to work with.
True. But could you perhaps keep the atomizer completely internal? It would keep it protected, and you would simply have to pop in a cartridge/mouthpiece and be good to go. I realize the issue there would be heat of the atomizer being contained in the box, and possible airflow problems, but I'm sure both could be handled in some way with some venting. Perhaps even a microfan? Might help keep the batteries cooler as well.
<You can't tell it from the title, but it should sound like a Dalek saying it...>
MkII (Tardis) materialized in OKC today. Battery charged. So far, so good.
Nice, rich taste to it...
Not bad at all....
Thanks, Petercro!
MkII (Tardis) materialized in OKC today. Battery charged. So far, so good.
Nice, rich taste to it...
Not bad at all....
Thanks, Petercro!
Attachments
Last edited:
Mmm no problem. The stuff I consider off limits I wouldn't post, I put that up so we could open source that idea. It is more valuable to me out here with other minds adding to it than keeping it for myself.
And again you shared some great stuff.
The sidewinder was made by Tinear (as was the mAhmba! pic attached).
My current mod I'm trying to finish has a retractable mouthpiece/atty (atty stays mostly inside the case with a mouthpiece that's flush when not in use). Hopefully I get it done this week and pics up when complete (damn springs!!!!)
My current mod I'm trying to finish has a retractable mouthpiece/atty (atty stays mostly inside the case with a mouthpiece that's flush when not in use). Hopefully I get it done this week and pics up when complete (damn springs!!!!)
Attachments
![sidewinder[1].jpg](/data/attachments/3/3759-11c7d4bafe9c1f3f35dabb764a280d07.jpg)
very sweet.
(clyde-did you get your AFS?) btw, petercro, have you (and/or anyone else - Mike. Mr., TW?) checked out the GG/AFS (automatic feed system) setup? looks like a side-fill to the atty, clyde? is it check-valved or?
Those were way back too. I could never figure why someone didn't mass produce or financially back those two. Or perhaps they are as we speak. They were way ahead of what we are doing as far design/looks.
I don't mean to dismiss what we are doing but sticking stuff in RS project boxes and altoid tins is fairly crude.
All in good time I guess. Keep marching....
Yes I first saw it here in the the Indulgence thread and then on the French language forum. Pretty nifty but not my style.
It was originally a french thing I think.
I've got a couple different springs that will work, I'm to the point of needing to mounting it so I'll use one that does the job without too much force (and of course I could cut one if needed). For the atty/mouthpiece movement I'm using an extension spring (as I wasn't happy with my initial thought of using a compression spring).
The build would have been fairly easy if I had picked a larger case for it. I wanted one as small as possible so I've gone with a plastic case (though not a batt. box, it's slightly smaller than a 3AA box) and fitting everything inside and in an ergonomic layout was a challenge.
I totally agree but those are NOT my handywork! The images are of the mAhmba (left) and sidewinder (right) both designed and built by Tinear.
I'm hoping my build quality is half what those are!
No, not yet. Imeo's not selling the new one yet, nor is anyone selling the old one (paging lawnman3, paging lawnman3)
.
Liquid viscosity update.
Now on approximately 88 - 90% VG
Liquid takes 8 -9 seconds to reach the atty, but working in 3 degs temp.
In my hotel room , very warm it only takes 5 -6 seconds.
I must say vape is just so much better with VG.
Now on approximately 88 - 90% VG
Liquid takes 8 -9 seconds to reach the atty, but working in 3 degs temp.
In my hotel room , very warm it only takes 5 -6 seconds.
I must say vape is just so much better with VG.
Petercro
The vape cloud smoother and more satisfying than pg for you? Pg doesn't work for me I love the vg juice better. The pg would rough up my throut vg dont . Where are you working thats 3 degs temp ? And please excuse me for askin what do you do for a living ?
If you dont mind , If you would rauther not answer ,I would understand?
The vape cloud smoother and more satisfying than pg for you? Pg doesn't work for me I love the vg juice better. The pg would rough up my throut vg dont . Where are you working thats 3 degs temp ? And please excuse me for askin what do you do for a living ?
If you dont mind , If you would rauther not answer ,I would understand?
He's currently at Redhorn (Caradhras as he likes to call it) which is part of the Misty Mountains. As for work? He Lords over all of Rivendell, it's time consuming but he still finds time to tinker with mods!
Mike is correct.
But I do have some other hobbies which take up some of my time.
I Make floors.
Terrazzo to be precise. And most of my work is within (I'm ashamed to say) pharmaceutical construction. Or Clean-Room environments.
I design, Diamond Polish and install antistatic clean-room floors.
And it is bloody cold here in Wales. UK.
Dan VG Rocks. PG Just Ok
But I do have some other hobbies which take up some of my time.
I Make floors.
Terrazzo to be precise. And most of my work is within (I'm ashamed to say) pharmaceutical construction. Or Clean-Room environments.
I design, Diamond Polish and install antistatic clean-room floors.
And it is bloody cold here in Wales. UK.
Dan VG Rocks. PG Just Ok
Oh, so you have to gently squeeze it for a few seconds for it to work? That explains a few things. Does the atty gargle a bit on the mkI when it's vaping right?
- Status
Similar threads
