The FastTech Thread For All FastTech Posts

Status
Not open for further replies.

puchox

Super Member
ECF Veteran
Verified Member
May 2, 2013
658
828
42
Montevideo, Uruguay
I would go with this
https://www.fasttech.com/products/1368506

Plus the twist that Puchox posted.

Dat edit, you didn't give me time to prepare this

19sOn4P.jpg
 

FrostyWolf

Senior Member
ECF Veteran
Verified Member
Apr 26, 2013
167
270
41
Punta Gorda, Florida
Tried and true, go for the itaste VW v3.0 you get 4 iclear16 clearomizers, charger, variable wattage, variable voltage, ohm check.
$39.54 iTaste VW V3.0 7-in-1 Variable Voltage Rechargeable 800mAh Electronic Cigarettes Set - vv-3.0 at FastTech - Worldwide Free Shipping

While with the i16's you don't need the ohm check the full featured itaste leaves the door open for future "fiddling" if he wants to try RBA's he has an ohm checker or if he starts buying delivery devices with different ohm settings he can just use the VW and forget about it :)


Not "tried and true" yet(i bought like 6 but you could wait for some one to receive theirs and update us all :O) but crazy cheap would be one of the 12 dollar ego twist, a couple of i16's or x9 tanks, an ego charger and some liqua :)

$12.69 EGO-C Twist 1100mAh Variable Voltage Rechargeable Battery for E-Cigarette - black / 3.2-4.8V at FastTech - Worldwide Free Shipping

$3.00 Innokin iClear 16 Dual Coil Electronic Cigarette Round Mouth Atomizer (1.6ml) - translucent / 2.4

$6.04 X9 Protank Atomizer with Plastic Tank (2.5ml) - translucent / 2.5

$2.52 USB Charger for EGO Electronic Cigarette - cable length 25cm at FastTech - Worldwide Free Shipping

$2.87 Authentic LIQUA E-liquid for Electronic Cigarettes (10ml) - energy drink flavor / 18mg/ml nicotine at FastTech - Worldwide Free Shipping

That itaste isn't the one with the magnet thing, is it? A local vendor here just recently bought 20 of what ever mod that is, and she was very upset that 18 of them wobbled no matter what you put on them. Using the 510 magnet adapter or the head it comes with, they were all horribly unstable.
 

puchox

Super Member
ECF Veteran
Verified Member
May 2, 2013
658
828
42
Montevideo, Uruguay
That itaste isn't the one with the magnet thing, is it? A local vendor here just recently bought 20 of what ever mod that is, and she was very upset that 18 of them wobbled no matter what you put on them. Using the 510 magnet adapter or the head it comes with, they were all horribly unstable.

Afaik, it has 510 and eGo threading, so everything screws into the battery firmly. There are a couple of the thread regulars that have that device and can guide you better on that question tho :)
 

FrostyWolf

Senior Member
ECF Veteran
Verified Member
Apr 26, 2013
167
270
41
Punta Gorda, Florida
Afaik, it has 510 and eGo threading, so everything screws into the battery firmly. There are a couple of the thread regulars that have that device and can guide you better on that question tho :)

O, I was just wondering for who ever was asking what to get. If its not the one with the magnet locking system, it should be fine. I have no idea which one had it, but after a quick search it looks like there is a "improved" one:

http://www.e-cigarette-forum.com/fo...3-ego-connection-improved-magnet-version.html

So maybe they fixed it anyway. I had just walked into the store and heard her complaining loudly about it and asked what was up, lol.
 

Bmwmom2002

Super Member
ECF Veteran
Verified Member
Jul 4, 2013
883
572
53
North Carolina
First fast tech order today and its an itaste MVP! Hope it doesn't take the full 2 weeks to get to CT!

I ordered today too. Says it wont ship till the 5th. My other order from July 8th was supposed to ship today, but it doesnt look like it has. I'll be waiting forever.
 

tA71ana

Ultra Member
ECF Veteran
Verified Member
May 26, 2012
1,243
2,530
Round N Round the Mulberry Bush
Does anyone know if the Sigelei Kick will fit inside the TVS MOD https://www.fasttech.com/product/1400102
I have found dimensions for the TVS but not for the Sig Kick..maybe someone has this combo and can tell me whether it fits? If it doesn't fit I can just buy a fuse (Smoktech, Holocron Labs or Kamry)
 

mtdewfreak

Senior Member
ECF Veteran
Verified Member
Jun 30, 2013
272
134
Texas
Does anyone know if the Sigelei Kick will fit inside the TVS MOD https://www.fasttech.com/product/1400102
I have found dimensions for the TVS but not for the Sig Kick..maybe someone has this combo and can tell me whether it fits? If it doesn't fit I can just buy a fuse (Smoktech, Holocron Labs or Kamry)


here is a thread on the kick clone
http://www.e-cigarette-forum.com/forum/apv-discussion/427570-kick-clone-aka-sigelei-k-show-tell.html

and i have read that there is a 19.5mm max diameter
 

funkyZero

Super Member
ECF Veteran
Verified Member
Mar 11, 2009
485
736
Indianapolis, Indiana USA
I know this has been asked to death, but yeah I am asking again :p

I want to buy a cheap ego/rebuildable clearomizer set for my friend, kind of kick start his cheap ... into vaping. I know most everything is a knock off at fasttech. Can anyone recommend a tried and true starter kit from there?

Thanks

This is what I am ordering for people:
https://www.fasttech.com/products/1392700
I got a couple sets of these so I can give out 3-4 tanks per kit. They work great. They are disposable though, you cannot change the heads. I figure 4 tanks and a battery should last a new person at least a few months and the investment is very small.. and they can experience multiple tanks so they can have flavor variety at their fingertips with no rinsing or cleaning.

I kit them up with one or 2 of these:
https://www.fasttech.com/products/1369803

They are variable voltage with the twist knob on the bottom. Real easy to deal with and good performers. An entire kit is then about 20 bucks. You can up the ante if you want and get them an extra battery to rotate here: https://www.fasttech.com/products/1411/10004043/1408803

Problem is, I can't find standalone 650mah twist batteries at Fasttech. They are all 1100's unless you buy that little kit for 15 bucks.

so, you could buy 2x650mah twist kits (https://www.fasttech.com/products/1392700), 7 extra tanks (https://www.fasttech.com/products/1392700) and a little case ($2.82 Electronic Cigarette Carrying Zipper Pouch Bag for Ego (Small Size) - blue / inner size 130mm*45mm at FastTech - Worldwide Free Shipping) all for about 48 bucks, free shipping, no sales tax. And that's a hell of a good kit to start off. You could cut that to 25 bucks if you just buy one CE5 kit and 2 extra tanks instead of the 7 pack.

I'll pay 50 bucks out of my own pocket any day if it'll get one of my good friends off cigarettes. And if it's a bust and he doesn't like it or doesn't take to it, get it back, throw away the tanks and order 7 new ones for 12 bucks and hand it off to another friend.

The only other advice I would give is for juice. If you haven't tried Fasttech's offerings, get a few bottles... it's dirt freekin cheap. You don't get 30ml of juice anywhere else for 5 bucks. I personally don't like any of it that I've gotten so far, but everyone else seems to love the stuff for the price point. To me, the only one that was tolerable was the RY4 (https://www.fasttech.com/products/0/10004420/1393318-hangsen-e-liquid-for-electronic-cigarettes-30ml), but it didn't have the heavier caramel that I love from Apollo RY4.
Again, I seem to be the only one that doesn't like their liquids so take it with a grain of salt.

Hope this helps, it's a good kit for a trial user on the cheap
 

funkyZero

Super Member
ECF Veteran
Verified Member
Mar 11, 2009
485
736
Indianapolis, Indiana USA
Is it Hangsen that comes from FT in the leaky bottles?

Not necessarily.
I got some Apple flavor that WAS shrink-wrapped and it had leaked all inside of the plastic.
The problem is the stinking bottles. The lids will NOT screw on tight, anything past loose and they just strip over and over, they won't even snug up. Thank god they put the liq is a separate plastic ziplock with bubble-wrap. It was a flippin mess.
I'm more disappointed that I didn't like any of it. I have 300ml of various juice sitting here that I don't like. pht...
 

funkyZero

Super Member
ECF Veteran
Verified Member
Mar 11, 2009
485
736
Indianapolis, Indiana USA
First fast tech order today and its an itaste MVP! Hope it doesn't take the full 2 weeks to get to CT!

I had my MVP in 9 days, but I ordered it on an order all by itself so it wouldn't get held up for something stupid. I had to order the one with the UK power wall wart because the US power one had a 4-5 day ship wait on it. No biggie to me, I have like 20 of those things laying all over the place at home.
 

funkyZero

Super Member
ECF Veteran
Verified Member
Mar 11, 2009
485
736
Indianapolis, Indiana USA
$6.71 JUK23 Rebuildable Electronic Cigarette Atomizer - 1.7

Anyone see this? I am wondering how this preforms and if it's any good.

I'll be finding out on a week or so. I ordered one of them a few days back, can't remember when exactly. I've lost track of my FT orders now. I feel so ashamed.
But hey, I spend the day unpacking all my stuff yesterday and I've been like an old hog wallering in a mudhole with all the new stuff to test out.

http://s453.photobucket.com/user/funkyzero/library/FastTech Shipment 1?sort=3&page=1
 

xtwosm0kesx

Ultra Member
ECF Veteran
Verified Member
Jun 30, 2010
2,298
3,160
Face down in the gutter, USA
I'll be finding out on a week or so. I ordered one of them a few days back, can't remember when exactly. I've lost track of my FT orders now. I feel so ashamed.
But hey, I spend the day unpacking all my stuff yesterday and I've been like an old hog wallering in a mudhole with all the new stuff to test out.

http://s453.photobucket.com/user/funkyzero/library/FastTech Shipment 1?sort=3&page=1

Any issues with firing/charging on your twist kit? Your center post looks very similar to mine before i had to take a dremel to it.
 
Status
Not open for further replies.

Users who are viewing this thread