The FastTech Thread For All FastTech Posts

Status
Not open for further replies.

funkyZero

Super Member
ECF Veteran
Verified Member
Mar 11, 2009
485
736
Indianapolis, Indiana USA
I had the same thing happen shannan. What I worked out was that the pass through needs close to 2 A to run and the charger puts out either .5 or 1 A. You risk doing some seriouse damage running it off of your computer. I am using a power usb that puts out over 2 A or you will need to get a usb wall wart that puts out over 2A.

For personal reasons.


Just an FYI: I'm not sure if they are all the same, but the iPad wall warts meet this spec and I have only ever seen one car cigarette lighter USB nub that would put that much out... I can't remember what it was now, but I found them on Amazon. Unfortunately, you will have to sift through the reviews to find that valuable information, that's what I can't point you directly to it at the moment. And like you, I'd worry about using the computer USB port for that as well.

Here is a link to one that will do the job: $12.30 Universal 2.1A AC Power Adapter 4-Port USB Travel Charger (UK/Euro/US/AU Plug) - white / wall charger at FastTech - Worldwide Free Shipping
 

e-pipeman

Vaping Master
Supporting Member
ECF Veteran
Oct 16, 2008
5,430
5,594
Brown Edge, England
We just need to remember not to feed the trolls (even for personal reasons). The mods are also doing a better job of nuking post that are starting to head in that direction.

Where would the fun be without troll baiting? Ah, we'll all have to start living in plastic bubbles and say "Bah!" instead of "f098 opp". A strangely sanitised world. :)
 

Ref Minor

Ultra Member
ECF Veteran
Verified Member
May 11, 2013
2,476
4,403
UK
I might have screwed up :?: I ordered one of these: https://www.fasttech.com/products/1368500 but I don't have an eGo style charger. Do they come with a charger? It says nothing about one in the listing.

I might be in the same boat. We need Shannanagans to tell us if she needs a dedicated charger for it (although she may have bought the kit)
 

Capt.shay

Vaping Master
ECF Veteran
Verified Member
May 10, 2013
3,662
8,189
W. Ma. U.S.A.
Just an FYI: I'm not sure if they are all the same, but the iPad wall warts meet this spec and I have only ever seen one car cigarette lighter USB nub that would put that much out... I can't remember what it was now, but I found them on Amazon. Unfortunately, you will have to sift through the reviews to find that valuable information, that's what I can't point you directly to it at the moment. And like you, I'd worry about using the computer USB port for that as well.

Here is a link to one that will do the job: $12.30 Universal 2.1A AC Power Adapter 4-Port USB Travel Charger (UK/Euro/US/AU Plug) - white / wall charger at FastTech - Worldwide Free Shipping

This will do it for less than half as much: $5.87 12W 2.4A USB Power Adapter/Wall Charger (US Plug) - Apple compatible interchangeable AC plug at FastTech - Worldwide Free Shipping

And this should do for the car: $1.95 USAMS Compact Dual USB Car Charger Adapter (Black) - 3.1A high output at FastTech - Worldwide Free Shipping

I was going to order these before a friend gave me a powered USB port.
 
Last edited:

BakuPeg

Super Member
ECF Veteran
Verified Member
Apr 10, 2012
743
931
Gainesville, Ga

e-pipeman

Vaping Master
Supporting Member
ECF Veteran
Oct 16, 2008
5,430
5,594
Brown Edge, England
10 of these arrived today:

$1.71 EGO 510-T Electronic Cigarettes Flat Mouth Atomizer with Refill - black at FastTech - Worldwide Free Shipping

Took one out, removed plasticky tank thingy, added drip tip and cone, dripped. Very good indeed - lots of flavour and vapour - and cheap as chips!

Small niggle. Threads on atty base seem a little rough. Otherwise all good imho. :)

Replying to my own post just as a warning. The threads on these have been machined by a quern. Rough ain't in it. PLEASE use a 510 to ego adapter if you are going to use these (looks a bit odd sticking so far above the cone but - boy- flavour and tons of vape for pennies. ) Just don't whack one into your Vamo and expect the threading to survive. :)
 
Last edited:

screwu2man

Senior Member
ECF Veteran
May 17, 2013
103
98
PA
I might be in the same boat. We need Shannanagans to tell us if she needs a dedicated charger for it (although she may have bought the kit)

Sorry, I am not Shannanagans, but I may be able to help. I also Have the X6, I bought the kit but use my Apollo ego adapter to charge my X6. It charges it just fine. Just tighten it up good and watch the light go from green to red and starts flashing. So yes you can use something other then the one that comes with the kit. Hope this helps ya out.
 

shannannagans

Super Member
ECF Veteran
Jun 6, 2013
446
582
Alabama USA
Sorry, I am not Shannanagans, but I may be able to help. I also Have the X6, I bought the kit but use my Apollo ego adapter to charge my X6. It charges it just fine. Just tighten it up good and watch the light go from green to red and starts flashing. So yes you can use something other then the one that comes with the kit. Hope this helps ya out.

I did buy the kit. I used a regular ego charger on it, and it was fine. It didn't feel as secure on it as it did the dedicated charger, so just make sure it's not somewhere that it can get bumped like a counter or table.
 

flowerpots

Ultra Member
ECF Veteran
Verified Member
May 21, 2013
1,411
1,968
my desk
Yayyyy, made it to San Fran..now the USPS trek across the country....

First-Class Package International Service


Processed through USPS Sort Facility


July 17, 2013, 11:27 am


SAN FRANCISCO, CA 94128


International Letter




Processed Through Sort Facility


July 16, 2013, 9:47 am


HONG KONG AIR MAIL CENTRE, HONG KONG





Acceptance


July 15, 2013, 1:18 pm


HONG KONG
 

puchox

Super Member
ECF Veteran
Verified Member
May 2, 2013
658
828
42
Montevideo, Uruguay
@puchox Which poly carto tank did you get? Also, which cartos

@Myrany I ordered some of the pyrex Smoktech like ones and should get them within the week. I'm hoping they are actual ST and enjoy them as much as you do. I'm also curious on how the colors are gonna turn out lol
TIA for the feedback!

Sorry for the late reply, just woke up.

The igo-l on my picture is the real one, comparing it to the photos on FT it looks that the FT ones are clones, pretty good ones tho.

Regarding the tank and cartos i got them from hoosiervapes, boge F16 tank with boge F16 flanged replacement cartos. I'm loving them right now, that's why i have 2 pyrex tanks on my next order from FT but i'll probably buy boge cartos from healthcabin :)
 

Borescoped

Ultra Member
ECF Veteran
Verified Member
Jun 24, 2013
1,814
5,178
Minot, ND
Maybe we should have this thread renamed and stickied.. The Fasttech therapy thread...

Noone has tried one of these? I think I'll just buy one and have hubby try it out..
Looks like a mini squid.. RDA Mini Rebuildable Dripping Atomizer (1.0mL)
$4.77 RDA Mini Rebuildable Dripping Atomizer (1.0mL) - 2.4

Basically the one I ordered, but under a different naming system?

Phoenix V4 Detachable Dripping Atomizer (1.2ml)

I was having a hard time trying to ohm it out after building a coil for it, but finally tried a "micro" style coil with 32awg A1, something like 10 wraps (around a 3/32 drill bit), came out to 2.5ohms or so. Not bad I guess, is my first dripping atty/RDA, so no expert by any means. Been tinkering with mine, and kinda chain vaping it. It's been getting hot with some chain vaping on my ego, but not to the point I can't vape it.

I'd say, not bad, but I will personally need to tinker with it more to try to get the most out of it. YMMV. For the price, I'd say it's worth picking up to mess with it.

Next order, IGO-L!
 
Last edited:

Borescoped

Ultra Member
ECF Veteran
Verified Member
Jun 24, 2013
1,814
5,178
Minot, ND
Yayyyy, made it to San Fran..now the USPS trek across the country....

First-Class Package International Service
Processed through USPS Sort Facility
July 17, 2013, 11:27 am


SAN FRANCISCO, CA 94128
International Letter
Processed Through Sort Facility
July 16, 2013, 9:47 am


HONG KONG AIR MAIL CENTRE, HONG KONG
Acceptance
July 15, 2013, 1:18 pm
HONG KONG

Could be worse!!! For some reason unfathomable to me, mine hasn't left SF still?!??



Processed through USPS Sort Facility
July 13, 2013, 8:29 pm
SAN FRANCISCO, CA 94128
International Letter

Depart USPS Sort Facility
July 11, 2013
SAN FRANCISCO, CA 94128

Processed through USPS Sort Facility
July 11, 2013, 8:46 am
SAN FRANCISCO, CA 94128

Processed Through Sort Facility
July 9, 2013, 3:27 am
ISC SAN FRANCISCO (USPS)

Processed Through Sort Facility
July 8, 2013, 8:06 pm
HONG KONG AIR MAIL CENTRE, HONG KONG
Origin Post is Preparing Shipment

Acceptance
July 5, 2013, 2:38 pm
HONG KONG

EDIT: Cleaned up the spacing!
 
Last edited:

Lilkcceleb

Super Member
ECF Veteran
Dec 1, 2011
795
257
Kansas City
Could be worse!!! For some reason unfathomable to me, mine hasn't left SF still?!??



Processed through USPS Sort Facility
July 13, 2013, 8:29 pm
SAN FRANCISCO, CA 94128
International Letter

Depart USPS Sort Facility
July 11, 2013
SAN FRANCISCO, CA 94128

Processed through USPS Sort Facility
July 11, 2013, 8:46 am
SAN FRANCISCO, CA 94128

Processed Through Sort Facility
July 9, 2013, 3:27 am
ISC SAN FRANCISCO (USPS)

Processed Through Sort Facility
July 8, 2013, 8:06 pm
HONG KONG AIR MAIL CENTRE, HONG KONG
Origin Post is Preparing Shipment

Acceptance
July 5, 2013, 2:38 pm
HONG KONG

I think USPS is behind. It sucks, that we all know. My battery was delivered today and my delivery status touch app said it would be tomorrow. I called USPS and they said the same thing the app said. 3 hours later, after I watched the postman scan my delivery, it said out for delivery. My FT order is in San Fran as well and just says processed through sorting.
 

E_Cig Vicious

Senior Member
ECF Veteran
Verified Member
Apr 28, 2013
250
337
Gateway to the Midwest
Got my X9 and x10 today. X9 works fine - tank sounds like glass when tapped with a finger. X10 works fine on my Lambo - but 999s on the Vamo. Perhaps its the threading - the thread "pole" seems to be a bit short. I think the X9 will become a firm favourite because of the nice big tank. The X10 - jury still out because of the threading issue.

I got 2 x10's that work fine on my Vamo. The heads on yours probably are not making contact to the positive pin on your Vamo. I ended up putting in a kanger evod head pretty soon as the heads that came with mine tasted burnt. Which I think is odd as the head that came in my X9 worked great. I really like the X10 as they work just as good as my evods but match the size of bigger mods better.

The X9 I got really trips me out the way it sounds like glass when you tap it with something. I did the scratch test on it and it is defiantly polycarbonate. The X9 and X10 are both well built and I wouldn't hesitate to recommend either of them from my experience so far with them.
Which X9 do you guys have? The translucent one initially released...
$6.92 X9 Protank Atomizer with Plastic Tank (2.5ml) - translucent / 2.5
or the newer version with slots in base and the shorter top with more tank showing transparent + colors...
$7.56 X9 Protank Atomizer with Plastic Tank (2.5ml) - transparent / 2.5

Thanks for the reviews guys! I really appreciate everyones time and input on the products.
 

Borescoped

Ultra Member
ECF Veteran
Verified Member
Jun 24, 2013
1,814
5,178
Minot, ND
I think USPS is behind. It sucks, that we all know. My battery was delivered today and my delivery status touch app said it would be tomorrow. I called USPS and they said the same thing the app said. 3 hours later, after I watched the postman scan my delivery, it said out for delivery. My FT order is in San Fran as well and just says processed through sorting.

Just irritated... this one has my VAMO, batteries and charger in it! And, FT had the VAMO in stock when I ordered it, but then didn't... and had to wait until the 4th of July to receive it from the manufacturer and then ship it off to me.... order was placed on the 28th. AND it's gotta make it's way all the way out to my APO box in the UK, so has to travel across the US to NY first, then get transported to the UK.
(No, it wouldn't let me use paypal to ship to my off base address... doesn't match the address on the PP acct LOL)
VAPE MAIL TAKING TOO LONG!!! lol
 

e-pipeman

Vaping Master
Supporting Member
ECF Veteran
Oct 16, 2008
5,430
5,594
Brown Edge, England
Which X9 do you guys have? The translucent one initially released...
$6.92 X9 Protank Atomizer with Plastic Tank (2.5ml) - translucent / 2.5
or the newer version with slots in base and the shorter top with more tank showing transparent + colors...
$7.56 X9 Protank Atomizer with Plastic Tank (2.5ml) - transparent / 2.5

Thanks for the reviews guys! I really appreciate everyones time and input on the products.

Well, mine turned up today. Looks like a slightly swollen Protank. Same colours and clarity. Works.
 

Lilkcceleb

Super Member
ECF Veteran
Dec 1, 2011
795
257
Kansas City
Just irritated... this one has my VAMO, batteries and charger in it! And, FT had the VAMO in stock when I ordered it, but then didn't... and had to wait until the 4th of July to receive it from the manufacturer and then ship it off to me.... order was placed on the 28th. AND it's gotta make it's way all the way out to my APO box in the UK, so has to travel across the US to NY first, then get transported to the UK.
(No, it wouldn't let me use paypal to ship to my off base address... doesn't match the address on the PP acct LOL)
VAPE MAIL TAKING TOO LONG!!! lol

LOL I swore if my battery didnt arrive today I was going to reenact Cindy on scary movie when she is outside screaming "What are you waiting for??!!!!"

Thankfully it's here but now I need my tanks from FT to try out. I did upgrade to the 5-8 shipping though. Did anyone else upgrade the shipping?
 
Status
Not open for further replies.

Users who are viewing this thread