The Kick by Evolv--Coming to Super-T!

[forcedfuel50]

Hey Super-T.... willl you be offering a kit with the Precise+ 18650 w/Kick and an appropriate AW IMR battery all setup with the correct washer in place ?

Yes, i do plan to offer a kit version of both the P+18500 and P+18650 with the kick and batts all set up ready to go. It won't be offered on the first wave of kicks just because supplies are limited on the Kick and i know alot of people have been waiting, but it is coming!

 

[Panky]

It appears that you prefer almost the exact range that I use on my Darwin. Assuming that you are using an atty that is around 3.5 ohms Good stuff.

c'mon, man! The George Foreman Grill is a little bit sexy..
View attachment 79141

Hell, you won't catch me with a new york strip or a slab of ribs on that abomination

 

[clyde2801]

Square EZ tank, btw?

 

[NebulaBrot]

Square EZ tank, btw?

nope, pyrex phiniac (about 3mm thick too). Very nice tank (have 2). Also have and use 5ml J-tank & prototype fuel tank, Lava(s) and custom blown glass varivape. Luvn the tanks!

 

[Burnside]

Hell, you won't catch me with a new york strip or a slab of ribs on that abomination

Good point. And if it was a grill-bot with a sexy voice? What then?

The Precise Plus with a Kick installed is on my list of Mods to own. Rhodium contacts, Evolv's variable wattage technology, and the Vapemate for constant dripping into a DCA i06 sounds very appealing to me.

 

[NebulaBrot]

A bit O.T but sooooo worthwhile, please check out this post: http://www.e-cigarette-forum.com/fo...oduction-filming-begins-soon.html#post5328749

Thanks - this IS important!

 

[cba191]

I'm still going to get a kick, but I'm a little bummed because I just realized that I love my favorite juice at about 13 watts.

 

[mwa102464]

Not me I'm stoked to have a pair of these bad boyz Kicked units 8-10 Watts is perfect for me.

 

[cba191]

I like the fruit stuff at about 9, but my buttered rum is awesome at 13w! I never knew til I checked it today.

 

[AZCraig]

I like the fruit stuff at about 9, but my buttered rum is awesome at 13w! I never knew til I checked it today.

I'm curious. What device / battery /atomizer combo are you using to run @ 13w ?

 

[BuzzKilla]

13W... sounds to me like you love the taste of chard toast... lol
the thought of 6V on anything but a HR atty makes my stomach turn...
But seriously, why so much?

 

[bushmasterar15]

Can't wait till the Kicks are available need to start saving so I can get one and a Vapemate.

 

[ltrainer]

Maybe someone can help me out here. I have quite a few 306 1.5 ohm attys. Can the Kick run them at 10 watts? Current would be 2.58 amps and voltage 3.87. When the 306s are used up I plan on switching to 2.3 to 2.5 ohm attys.

 

[clyde2801]

The kick can use them, and you should be able to set them at 10 watts, but like the darwin, the kick supposedly gets optimum performance out of standard and high resistance attys and cartos. That said, I use LR 510's on mine, and I love them.

 

[cba191]

I'm curious. What device / battery /atomizer combo are you using to run @ 13w ?

I was surprised to see it too. It's currently on an RSM Wench. It doesn't have a readout, so I just keep turning it up or down until it tastes the best. I was curious as to what I'd settled on so I checked it. The mod is set to 5.6v. And it's a lr boge in a tank that metered at 2.5v (I've had a couple boges lately that metered a bit off)

 

[BuzzKilla]

Maybe someone can help me out here. I have quite a few 306 1.5 ohm attys. Can the Kick run them at 10 watts? Current would be 2.58 amps and voltage 3.87. When the 306s are used up I plan on switching to 2.3 to 2.5 ohm attys.

Wouldn't that be the same as running an LR on a precise w/ a battery that is half charged....
I think the kick would actually increase battery life a bit...

As long as the IMR's can push that amp rate , "theoretically" the kick should run smoothly.

Unless there is an amp limit on the kick... is there?

 

[Panky]

Maybe someone can help me out here. I have quite a few 306 1.5 ohm attys. Can the Kick run them at 10 watts? Current would be 2.58 amps and voltage 3.87. When the 306s are used up I plan on switching to 2.3 to 2.5 ohm attys.

It can definitely be done but you will end up turning it down.

 

[clyde2801]

Yeah, I end up doing my LR 510's in the 5-7 watt range. Above that seems to be scorch city...

 

[vapn]

How long is your battery life with the 18490 and LR 510 at that setting Clyde?

 

[Roi]

Maybe someone can help me out here. I have quite a few 306 1.5 ohm attys. Can the Kick run them at 10 watts? Current would be 2.58 amps and voltage 3.87. When the 306s are used up I plan on switching to 2.3 to 2.5 ohm attys.

Yes. The Kick will work fine with 1.5 ohm attys. In my humble opinion though, the 2.3 - 2.5 ohm attys you are planning to switch to will put you close to the mid point of the recommended resistance range. No big deal either way though, that's the main point of the kick... As long as your atty is somewhere between 1.3 to 3.0 ohms, the kick compensates and makes the atty deliver the same amount of heat when you push the button.