The Precise Strata Dual Coil Rebuildable Atomizer/Integrated Tank PV

[Mindtroverted]

-The juice tank (which screws directly onto the PV) just like a top cap would. Also contains the sight glass.

-Rebuildable dual coil atomizer cap which also serves as the tank top cap. Also works in conjunction with the air control system in the top cap. Also contains the dual wicks and tank feeds.

-Top cap (contains the air control air distribution and air feed, works in conjunction with the atomizer cap). Also accepts any 510 style drip tip.

I must say I registered on this site just to be able to post here on this thread. I have no mods right now and I don`t plan on buying a whole lot of `em. I am very happy I decided to definitely order the Shockwave, but I would really enjoy having a rebuildable with it, and what better candidate than a rebuildable made by the same manufacturer?!

Now, I don`t really get what the universal version will consist of. Out of the three parts of the design that go onto the battery, which ones would be a part of the universal version that could be used with the Shockwave? I hope to be able to stack up on enough dough before it goes on sale, but I`d also like to make sure that that is my final vaping investment for a while.

 

[snork]

Miraculously I still have the Strata money I set aside in a secret account the day it was announced. It has accrued interest. I'm being paid to buy a Strata!

 

[Mindtroverted]

Miraculously I still have the Strata money I set aside in a secret account the day it was announced. It has accrued interest. I'm being paid to buy a Strata!

I had a similar account for the GGTS but found out about super-t and the Shockwave in the meantime and just couldn`t stand missing the opportunity, especially after I found out it`ll be a very limited run. I feel slightly hesitant to use commerical tanks and cartos on it because it`d really be a waste. The Shockwave deserves the best - and I think I found it.
But I still don`t know which parts will be available separately from the PV. Will it be just the atty part or will it contain the intake valve and the tank part as well?

 

[blackwater]

It's supposed to be a full PV from earlier in the thread. From what I remember.

Chris

 

[Mindtroverted]

It's supposed to be a full PV from earlier in the thread. From what I remember.

Chris

Nah, I`m talking about the version which could be used with the Shockwave, a version without the PV body. Oh, no matter. Better stop spamming the thread

 

[snork]

It seems to be taking a myriad of forms. First it was an integrated PV/tank/atomizer in 18650 and 18500 varieties. Then David suggested that a separate universal tank/atomizer (I assume with the air control etc. complete) would be available. Recently this has perhaps morphed into two different varieties also.
Additionally, David has stated that it/they will be available in either shiny or satin finish.

 

[proggieus]

my guess is that the Strata will basically have the same threads as the p16 top cap on its bottom plate. there will also be a bottom cap that has an integrated 510 connection. so if you are using it an a p+ you just unscrew your existing top cap from the P+ and replace it with the strata tank/atty. If you are using it on a shockwave or other 510 device you replace the bottom portion of the tank and and screw on the 510 base plate and then screw it on you PV.

Just a guess

 

[atavanhalen]

I had a similar account for the GGTS but found out about super-t and the Shockwave in the meantime and just couldn`t stand missing the opportunity, especially after I found out it`ll be a very limited run. I feel slightly hesitant to use commerical tanks and cartos on it because it`d really be a waste. The Shockwave deserves the best - and I think I found it.
But I still don`t know which parts will be available separately from the PV. Will it be just the atty part or will it contain the intake valve and the tank part as well?

From what I have gathered the universal strata tank will be everything above the top cap and instead of a top cap it will be male 510 threads. It wouldnt make any sense if it was just the atty part because the atty portion is integrated into the tank. What I mean is, from the sound of it, part of the wick will be submerged in the tank and the other end will be outside the tank and will have the coil wrapped on it. I guess I am making assumptions using previous knowledge about genisis attys so I could be wrong. Also if it didnt come with the tank portion it would just be a dripping atty. Who knows how things may evolve though.

 

[Mindtroverted]

From what I have gathered the universal strata tank will be everything above the top cap and instead of a top cap it will be male 510 threads. It wouldnt make any sense if it was just the atty part because the atty portion is integrated into the tank. What I mean is, from the sound of it, part of the wick will be submerged in the tank and the other end will be outside the tank and will have the coil wrapped on it. I guess I am making assumptions using previous knowledge about genisis attys so I could be wrong. Also if it didnt come with the tank portion it would just be a dripping atty. Who knows how things may evolve though.

That makes perfect sense and thank you for the explanation. However, when I look at the design at the beginning of the thread, the part that screws directly onto the PV is not the top cap but the tank (wouldn`t that count it as a bottom feeder?) So if the part that goes directly onto the PV needs to have the same threading as the PV body, then the tank would need a male 510 threading and not the top cap where the air intake valve is located. Consequently, the tank part would not fit any other PVs unless the tank unit itself is modified. Or have I totally and utterly misunderstood the design (not an unlikely possibility)?

 

[snork]

That makes perfect sense and thank you for the explanation. However, when I look at the design at the beginning of the thread, the part that screws directly onto the PV is not the top cap but the tank (wouldn`t that count it as a bottom feeder?) So if the part that goes directly onto the PV needs to have the same threading as the PV body, then the tank would need a male 510 threading and not the top cap where the air intake valve is located. Consequently, the tank part would not fit any other PVs unless the tank unit itself is modified. Or have I totally and utterly misunderstood the design (not an unlikely possibility)?

Right, it looks like a 510 connection would need to be added to the base, though our picture...

doesn't even show how the electrical connections are made in the integrated configuration. I guess if David told us he'd have to kill us.

 

[Malduk]

doesn't even show how the electrical connections are made in the integrated configuration. I guess if David told us he'd have to kill us.

Yeah the insides are a mystery. Though its probably done by having the body as a ground, and central pin through the tank to the atty chamber as a positive side of the circuit. As in most mods, its the simplest solution.

 

[Vaporologist]

I must say I registered on this site just to be able to post here on this thread. I have no mods right now and I don`t plan on buying a whole lot of `em. I am very happy I decided to definitely order the Shockwave, but I would really enjoy having a rebuildable with it, and what better candidate than a rebuildable made by the same manufacturer?!

Now, I don`t really get what the universal version will consist of. Out of the three parts of the design that go onto the battery, which ones would be a part of the universal version that could be used with the Shockwave? I hope to be able to stack up on enough dough before it goes on sale, but I`d also like to make sure that that is my final vaping investment for a while.

Only 100 Shockwaves made and one will make it to Zagreb? Now, that is awesome!!!

I can only imagine looking at that dinner table... cevapcici, palacinke, vino, and Shockwave to top it off... What a glorious sight!

 

[atavanhalen]

That makes perfect sense and thank you for the explanation. However, when I look at the design at the beginning of the thread, the part that screws directly onto the PV is not the top cap but the tank (wouldn`t that count it as a bottom feeder?) So if the part that goes directly onto the PV needs to have the same threading as the PV body, then the tank would need a male 510 threading and not the top cap where the air intake valve is located. Consequently, the tank part would not fit any other PVs unless the tank unit itself is modified. Or have I totally and utterly misunderstood the design (not an unlikely possibility)?

I guess I am using the term top cap liberally, to me the tank is acting as a top cap because it screws onto the body of the pv(battery holder and switch). But to clear things up further, from my understanding the UNIVERSAL strata tank will be everything above the the threads of the battery holder, it will obviously need the male 510 threads added to it so it will be able to work on other devices. I think you may be overthinking this, if David is gonna make a universal version of the strata tank, it most definitely is going to include all the parts that the strata was designed with besides the battery holder and switch since those will already be on the mod that you will be using it on. There are no pictures of the universal version so looking at the drawings of the strata pv can only tell you so much, of course you will not be able to remove the tank portion from the strata mod and put it on anything other than a P18***. The drawings are of the strata apv and that tank will only work on that mod or other P18's. When David makes the "all mods" or "universal" strata tank it will have the 510 threads protruding from the bottom instead of threads to screw onto a body. I am pretty sure that David has confirmed that he will be making the universal version so its just a matter of when. If I am wrong about that, please someone correct me.


disclaimer: all that being said, I obviously can not speak for David and do not mind being corrected if anything I said is off base.

 

[aziffel]

I guess I am using the term top cap liberally, to me the tank is acting as a top cap because it screws onto the body of the pv(battery holder and switch). But to clear things up further, from my understanding the UNIVERSAL strata tank will be everything above the the threads of the battery holder, it will obviously need the male 510 threads added to it so it will be able to work on other devices. I think you may be overthinking this, if David is gonna make a universal version of the strata tank, it most definitely is going to include all the parts that the strata was designed with besides the battery holder and switch since those will already be on the mod that you will be using it on. There are no pictures of the universal version so looking at the drawings of the strata pv can only tell you so much, of course you will not be able to remove the tank portion from the strata mod and put it on anything other than a P18***. The drawings are of the strata apv and that tank will only work on that mod or other P18's. When David makes the "all mods" or "universal" strata tank it will have the 510 threads protruding from the bottom instead of threads to screw onto a body. I am pretty sure that David has confirmed that he will be making the universal version so its just a matter of when. If I am wrong about that, please someone correct me.


disclaimer: all that being said, I obviously can not speak for David and do not mind being corrected if anything I said is off base.

I think you are correct,I hope he makes a bunch of 'em too.

 

[Mindtroverted]

Only 100 Shockwaves made and one will make it to Zagreb? Now, that is awesome!!!

I can only imagine looking at that dinner table... cevapcici, palacinke, vino, and Shockwave to top it off... What a glorious sight!

I`d only change vino to pivo but, yeah, that would be heavenly!

I`m thinking of the following setup: the Shockwave body, 26500 bat + kick, universal Strata in the middle and a T-tip drip tip on top just for aesthetics

I`ll have to cash in like 4/5 of my soul with the devil though. Hope he doesn`t have high interest rates

I was also thinking that, for those purists who still insist on wanting a slotted version of the Shockwave, if David found a way to do them in the future he could offer the possibility to send those units back to him and, in exchange, we`d pay a bit more so that we`d be able to thank him for his efforts and provide him with a little bit more capital (I think that for the Shockwave the costs were so great that the profit from a single sold piece amounted to no more than 25$).

 

[Vaporologist]

I`d only change vino to pivo but, yeah, that would be heavenly!

I`m thinking of the following setup: the Shockwave body, 26500 bat + kick, universal Strata in the middle and a T-tip drip tip on top just for aesthetics

I`ll have to cash in like 4/5 of my soul with the devil though. Hope he doesn`t have high interest rates

I was also thinking that, for those purists who still insist on wanting a slotted version of the Shockwave, if David found a way to do them in the future he could offer the possibility to send those units back to him and, in exchange, we`d pay a bit more so that we`d be able to thank him for his efforts and provide him with a little bit more capital (I think that for the Shockwave the costs were so great that the profit from a single sold piece amounted to no more than 25$).

I would suggest maybe selling a couple of pints of blood first before making alterations to your eternal arrangements

 

[Mindtroverted]

I seem to remember Dave saying that the width of the Strata will be around 20mm, which coincides with the width of the Shockwave`s top cap, if I recall correctly. So not only would it be a match made in vaping heaven, it would also be an aesthetically appealing fusion

I just hope the universal version will see the light of day before Christmas. Actually, I`m cheering for it to be just around that time because I reckon I`d be able to casually mention my wishes to my family in hope of some financial support

Family is important

 

[forcedfuel50]

The universal version (not pictured) will have a 510 connector on the bottom of it so as to fit most all 510 threaded devices, much like a tank or many rebuildable atomziers do.

The overall diameter of the Strata is the same as the PrecisePlus (approx. 20mm). The Shockwave's top cap is slanted and narrows to 20mm too so the universal version will fit that nicely too!

 

[forcedfuel50]

The universal version (not pictured) will have a 510 connector on the bottom of it so as to fit most all 510 threaded devices, much like a tank or many rebuildable atomziers do.

The overall diameter of the Strata is the same as the PrecisePlus (approx. 20mm). The Shockwave's top cap is slanted and narrows to 20mm too so the universal version will fit that nicely too!

There will also be a specific Precise/PrecisePlus version of the tank/rebuildable atomizer that will replace the top cap and screw directly onto the body of any existing or newly purchased Precise/PrecisePlus.

 

[gerry81611]

Awesome about the precise version!

My request would be for a mini version for my 18350. Maybe 2 mils or something appropriate for that battery size. I have a feeling that after I try the strata, my cartos wont cut it and it would be nice to have a pocketable version for going out, etc.


I'm looking forward to the strata!



G