Good morning Reoville. I was up in the Adirondack Mnts yesterday. The color there is past peak. I found this old truck on a back road.
The REO Lounge - Part III
- Thread starter redeyedancer
- Start date
- th_trl_thread_readers 0
- Status
^ Man, that's beautiful!
Great pic. I think that classic truck should be towed outta there to see if it might be possible to restore. Looks salvageable to me.
Great pic. I think that classic truck should be towed outta there to see if it might be possible to restore. Looks salvageable to me.
Last edited:
Morning everyone .... Its Sunday 
.... waiting until noon to break out the Scotch juice
Really I think I have my DIY Scotch perfected ..... been working on it off and on for almost a year.
Nothing but some good scotch and base but the % is very touchy. I can go 7% if I want to vape it right away but it goes bad after a couple weeks. I've settled on 4.5% scotch with at least a week of steep ..... so far that has stayed good until I finish each batch ... over a month.
vape on!
.... waiting until noon to break out the Scotch juice Really I think I have my DIY Scotch perfected ..... been working on it off and on for almost a year.
Nothing but some good scotch and base but the % is very touchy. I can go 7% if I want to vape it right away but it goes bad after a couple weeks. I've settled on 4.5% scotch with at least a week of steep ..... so far that has stayed good until I finish each batch ... over a month.
vape on!
Good Sunday Morning REOVille. For those who might be interested, early last week I started thread in the General E-Smoking called the 2013 Unofficial Equipment of the Year Poll. Real simple; list your Favorite Mod (power source) and attachment (juice burner). So far REOS is slightly ahead of ProVape (ProVari) and Innoken in the mods, and the RM2 a close third in juice feeders to SvoeMesto (KayFun) and Kanger (ProTanks). Thanks to the REONouts who have participated so far... just don't ask me to link to it, I still haven't figured that one out yet 
Anyways, Have a Safe and Blessed Sunday
Anyways, Have a Safe and Blessed Sunday
Good morning gang! We're back from playing with the zombies and had a stellar good time. I'm currently waiting on a load of clothes to dry and then I'm off to the after hours clinic. I either developed a shin splint or a blood clot in my leg while on vacation so I need to get it checked it out. Probably needed to get it checked out a couple of days ago when it started.
Good morning, gang! 
Good morning Reoville
I seem to be getting some juice leakage around the line between the top of the metal frame and the delrin insert below. 1. Is this common? 2. Can I fix it myself? (I am not overly gifted in the tinkering skills) Or is this a send it off to Rob problem? Any insight would be greatly appreciated. Master of Bassets...and not much else.
I had the same problem. I thought it was "sweating."lol Most mornings my Reo would have leakage like that around the catchcup and where you have your leakage as well. It gets on the back of the door as well. I put in a thicker Oring in the well around the connector and that fixed it. I used an Oring from the 6 ml bottle.Good morning Reoville
Master of Bassets...and not much else.
Good morning everyone. Gig yep thicker oring and make sure your wick isn't plugging the juice hole or the area around it. If excess juice stays in atty it will leak on you.
Good morning Reoville
Master of Bassets...and not much else.
It could be as said above. Look at your firing pin (remove batter push button). Do you see any liquid there? If so it's the connection where the firing pin is in the 510 connection. If not it could be just sweating so to speak but with your oring at the top like that I lean towards the firing pin loose or the gasket in the 510. Might need a rebuild if it's been a while.
Good morning everyone!
Thought for the day:
Live every day as if it were going to be your last; for one day you're sure to be right. ~Harry "Breaker" Harbord Morant
Thought for the day:
Live every day as if it were going to be your last; for one day you're sure to be right. ~Harry "Breaker" Harbord Morant
Good morning Reoville
Master of Bassets...and not much else.
Looks like you are using a thick o-ring around the bottom of the RM2. I see it clear in the pics.
I think the juice is making it's way past that o-ring and out and down the side behind the door.
There seems to be a little gap where the o-ring sits on the drip well.
i have never found the need to use an o-ring unless i have mismatched body and cap of different RM2's. Every time i have had leakage like that it has been because the atty is leaking and normally it is because the hole is obstructed by my wick being too low in it.
Looks like a good day to give your mod a thorough clean!
T
Looks like a good day to give your mod a thorough clean!
T
Good morning REOville!
Once Mrs Underdawg gets off work, we're packing up the Family Truckster and heading down to the City of Brotherly Love to cheer on some family participating in a breast cancer walk and then it's off to Passyunk Ave for............CHEESESTEAKS!!!!!
CHEESESTAKS & REO's........it's gonna be delicious!!!!
Once Mrs Underdawg gets off work, we're packing up the Family Truckster and heading down to the City of Brotherly Love to cheer on some family participating in a breast cancer walk and then it's off to Passyunk Ave for............CHEESESTEAKS!!!!!
CHEESESTAKS & REO's........it's gonna be delicious!!!!
Good morning Reoville
Have a good trip and good for you!!!
Family, friends, and I are getting set for the JDRF walk.
Have a good trip and good for you!!!
Family, friends, and I are getting set for the JDRF walk.
- Status
Similar threads
