The "REOMIZER" Rob's Rebuildable Atomizer

[redeyedancer]

o rings
http://www.reosmods.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=769&category_id=32&option=com_virtuemart&Itemid=3

O-Ring, Buna-N, 10mm x 12mm

I am working on replacement screws

 

[clyde2801]

I am working on replacement screws

Aren't we all?

 

[shadco]

Got my Reomizer today. Forgot to ohm it out. Cleaned up my Mini v2, added a 510 50 510 adaptor, popped in some 70VG Ahlusion Melonade and proceeded to vape away clouds and clouds of vapor with a really easy draw. Kinda light on the flavor. Remembered I have a Provari so I popped it on their and it ohm'd out at 2.4. So I upped the voltage on the PV and flavor and TH was right where I wanted it.

Friday I will be hunting down some cotton material t make some 1.5 to 1.8 ohm wicks.

This works well on a mini v2 with an adaptor. I'm fairly certain I can find some O rings to fit over the threads on the adaptor and seal up on the body.

 

[zodduska]

I received the Reomizer I purchased for my mom as an early xmas present today, I gave her a short lesson on building and installing a coil. And wow both of us were really impressed with the vape! Thanks Rob!

 

[valcityboy]

Two shots out for Rob!

1. I sent him a banged up reo grand i got on the freebie as it was "junk" sent to Rob and a little fee and 5 complete days ship to and received from BAM! A free Reo grand. Thank you redeyedancer!

2. Ordered the reomizer, reoatty, reatty, or my input the rerobatty we'll stick with reomizer on Friday received today and wicked up with a tail looped under the coil to get juice from hole and both my vvs have rbas now era on other and they are both fog boxes... man for half the price it's just as good if not better. I used the prebuilt wick but too airy. when i added the tail and looped under the ciil to reduce the amount of airflow, just like the 1.5mm hole on the era.

Thanks for hooking your customers up. no one does it like us but us. USA!

Sent from my SCH-I535 using Tapatalk 2

 

[redeyedancer]

Well I am glad some of you are enjoying the atomizer . I was a bit worried people would think it was something from me and expect it to be a master piece indestructible . It is what it is a modified Chinese mass produced atomizer . Does it vape well oh yeah

 

[valcityboy]

Well I am glad some of you are enjoying the atomizer . I was a bit worried people would think it was something from me and expect it to be a master piece indestructible . It is what it is a modified Chinese mass produced atomizer . Does it vape well oh yeah

precisely what I was looking for. I like function over form but the form is good for me and didn't cost a fortune or so

Sent from my SCH-I535 using Tapatalk 2

 

[Sterno]

hey Rob is the other RBA on your site a bottom feeder the poenix also will it fit mini ? and why is it only 8 buks ?

 

[redeyedancer]

hey Rob is the other RBA on your site a bottom feeder the poenix also will it fit mini ? and why is it only 8 buks ?

Hey Scott its a dripper not bottom feed .
It wont fit on the mini . Its $8 screw driver included why because I didn't pay much for them and I didn't have to modify them. IT is a great little atty I use one to test all my mods but I use a 510 to 510 adapter they can short reos the center pins float but with the adapter there are no worries. Its the only time I will recommend using a adapter on one of my mods this is still a advanced user atty

 

[Sterno]

Hey Scott its a dripper not bottom feed .
It wont fit on the mini . Its $8 screw driver included why because I didn't pay much for them and I didn't have to modify them. IT is a great little atty I use one to test all my mods but I use a 510 to 510 adapter they can short reos the center pins float but with the adapter there are no worries. Its the only time I will recommend using a adapter on one of my mods this is still a advanced user atty

ok thanks buddy

 

[Drako60]

Should have mine saturday, won't be able to rewick it till tuesday though, but it's what I was looking for in an RBA, wide posts, and bottom fed, I'm easy to please, the threaded cap and larger air hole are bonuses.

Question, what is the o-ring for?

 

[Sterno]

Question, what is the o-ring for?

it keeps juice from draining into the catch cup

 

[whatitstrue]

Well I am glad some of you are enjoying the atomizer . I was a bit worried people would think it was something from me and expect it to be a master piece indestructible . It is what it is a modified Chinese mass produced atomizer . Does it vape well oh yeah

it vapes as well as any of my rba's and fits on the VV Woodvil nicely. My a7 does as well but the reomizer being half the size just looks so much better.

With my era on VV Grand and the reomizer on the VV Woodvil in a blind taste test I can't tell the difference. And for being a modified mass produced rba its much nicer looking than I was expecting it to be.

 

[tmcase]

I've got a problem. 2 in fact. I got my Reomizer today and I can't figure out how to get the oring on. It looks like it's all the way around the connector but when I turn the REO upside down the oring falls out so it's not seated properly and I can't get it to stay. HELP!

2nd...the atty fits in the well on my Woodvil but doesn't screw down. One turn and it stops. If I force it about a 1/4 turn it stops and I can't back it out without the top cap coming off. So it isn't making a connection. HELP!

 

[Rhapsodies Fire]

Drop the o-ring in the connector first. Then screw your atty down.

If your atty does not fit in the well of your woodvil, yours may be one of the few that is too small to take an RBA. Don't try to force it.

 

[tmcase]

Drop the o-ring in the connector first. Then screw your atty down.

I did that. There were instructions.

 

[tmcase]

Well...my Woodvil is on it's way to Maine damn it! The problem is the juice well is too small.

 

[redeyedancer]

Well...my Woodvil is on it's way to Maine damn it! The problem is the juice well is too small.

I only charge $800 a piece

 

[Randy C]

I don't know... maybe it's me, I think I would have answered Rhapsodies Fire's response with something like this: "Thank you for your response Rhapsodies Fire, I appreciate your help, but it's still not working;"

When you come into an ECF thread and say "I can't figure out how to..." people will rush to to your side to help. Was it necessary to give Rhapsodies Fire a short, kind of arrogant response after he tried to help you?

Now... my advice to you moving forward: Read the instructions!

Oh I forgot... do a little research next time; these things don't fit older style Woovils. Maybe Rob will retro your Woodvil if you ask nice

 

[Randy C]

I only charge $800 a piece

Ha Ha.. I knew this was going to happen... She didn't ask nice. If I were Rob, I would charge her $3800