The Reonauts new lounge

[Papa_Lazarou]

I'm an indecisive person

I can't make up my mind whether I'm indecisive or not

 

[Kenna]

I'm still debating a Hadaly

See my previous post! Doooo iiiit!

Sent from my LG-V700 using Tapatalk

 

[Sloth Tonight]

See my previous post! Doooo iiiit!

Sent from my LG-V700 using Tapatalk

Fine the deed is done.

 

[Kenna]

Fine the deed is done.

The Sloth deserves it! [emoji6]

Sent from my LG-V700 using Tapatalk

 

[supertrunker]

i have a lot of different atties - not everything is for a cloud chasing idiot (most!). Sometimes something else is a nice change of pace, or a different build makes a juice pop more.

Such is vaping.

T

 

[Rule62]

I have lots of attys; but I basically use 4, most of the time.
Nuppin
O-16
Stumpy
Hadaly
Occasionally, I'll also still use a Manta V2.

 

[Papa_Lazarou]

I have a stupid number of atties - 30% MTL, 30% DL, 40% right in the middle

My personal hall of fame...
O-16
Graal
Stumpy
NaRDA
Nipple

 

[Danrogers]

Well I only use one atty now but at least I'm in good company. I went from the Rm2 to the O-16 because I knew it was exactly what I was looking for, now I have 4.

 

[muzichead]

i have a lot of different atties - not everything is for a cloud chasing idiot (most!). Sometimes something else is a nice change of pace, or a different build makes a juice pop more.

Such is vaping.

T

I have lots of attys; but I basically use 4, most of the time.
Nuppin
O-16
Stumpy
Hadaly
Occasionally, I'll also still use a Manta V2.

I have a stupid number of atties - 30% MTL, 30% DL, 40% right in the middle

My personal hall of fame...
O-16
Graal
Stumpy
NaRDA
Nipple

Well I only use one atty now but at least I'm in good company. I went from the Rm2 to the O-16 because I knew it was exactly what I was looking for, now I have 4.

Yeah, it took me quite a while to find the right one that ticked all the boxes for me but I finally settled into.....wait....wtf....I don't vape anymore!!!!!!!

 

[Rule62]

Yeah, it took me quite a while to find the right one that ticked all the boxes for me but I finally settled into.....wait...........I don't vape anymore!!!!!!!

I've never found an atty that ticks all the boxes. If I look hard enough, I can always find something about every one of them that I don't like. The Stumpy, O-16, Nuppin, and Hadaly are about as close as anything I've used. The Hadaly and O-16 have tighter top caps than I'd like. But easily fixed with different o rings. The Manta is the same way. I dislike super tight top caps. It's a pet peeve, I guess.

 

[Kenna]

Yeah, it took me quite a while to find the right one that ticked all the boxes for me but I finally settled into.....wait...........I don't vape anymore!!!!!!![emoji38][emoji38][emoji38][emoji38]

Woohooooo!!

Sent from my SAMSUNG-SGH-I317 using Tapatalk

 

[Kenna]

I've never found an atty that ticks all the boxes. If I look hard enough, I can always find something about every one of them that I don't like. The Stumpy, O-16, Nuppin, and Hadaly are about as close as anything I've used. The Hadaly and O-16 have tighter top caps than I'd like. But easily fixed with different o rings. The Manta is the same way. I dislike super tight top caps. It's a pet peeve, I guess.

I hate tight top caps. I can't get them off, my hands just won't do it. I have to have the ones that unscrew. The O16 is the only one that I can separate easily.

Sent from my SAMSUNG-SGH-I317 using Tapatalk

 

[Rule62]

I hate tight top caps. I can't get them off, my hands just won't do it. I have to have the ones that unscrew. The O16 is the only one that I can separate easily.

Sent from my SAMSUNG-SGH-I317 using Tapatalk

Actually, I find the O-16 to be a little tighter than I like. The Nuppin is about perfect. The Hadaly is tight with the stock o rings, but I changed them for softer silicone ones, and it's perfect.

 

[Rule62]

I noticed a couple days ago that the 8.5ml soft bottles are back in stock on the REO website. I got a few extras to have as spares. Best price you'll find them anywhere.

 

[classwife]

I hate tight top caps. I can't get them off, my hands just won't do it. I have to have the ones that unscrew. The O16 is the only one that I can separate easily.

Sent from my SAMSUNG-SGH-I317 using Tapatalk

I have cut a gripper thingy into strips - they are great for this !
Makes it soooo much easier to pull off caps !

 

[ed101z]

Hey guys. Hope everyone is doing good. I have a slight problem, and need some advice. The Magnet came out of my sliding door (white door that goes on Han Solo). I put it back in backwards using a tiny drop of super glue. How can I get the magnet out of the hole without ruining it? ...Put it in hot water? ...Use a Micro Torch?

 

[Papa_Lazarou]

I've never found an atty that ticks all the boxes. If I look hard enough, I can always find something about every one of them that I don't like. The Stumpy, O-16, Nuppin, and Hadaly are about as close as anything I've used. The Hadaly and O-16 have tighter top caps than I'd like. But easily fixed with different o rings. The Manta is the same way. I dislike super tight top caps. It's a pet peeve, I guess.

I hear you on the tight cap issue. Fortunately, I have truckasaurus hands and I can generally overcome the problem. That, however, sometimes leads to shredded o-rings when putting caps back on (even with the juice lube trick), which is the actual pain for me. Swapping for smaller o-rings is, as you say, a solution. I'll even go quite thin and then augment back bigger with dental floss under the o-ring as I can add or subtract that to get the perfect fit.

I also agree that no atty is perfect - some are just more not-perfect than others

 

[Sloth Tonight]

I haven't found an atty that ticks ALL boxes, but the O-16 is really close. Honestly, the only thing I'd like over the O-16 is something the Hadaly offers: direct airflow at the coil. Because the way I run O-16s is with a center coil. I have no use at all for dual coils. So this means the airflow is aimed diagonally from the sides. Granted, I could run it in true "single coil mode" with a side-mounted single - but, no. So, I like that the Hadaly has direct airflow intended for a single center coil.

Other than that - the O-16 is perfect, IMO, in all ways.

 

[KentA]

Hey guys. Hope everyone is doing good. I have a slight problem, and need some advice. The Magnet came out of my sliding door (white door that goes on Han Solo). I put it back in backwards using a tiny drop of super glue. How can I get the magnet out of the hole without ruining it? ...Put it in hot water? ...Use a Micro Torch?

Try acetone.

 

[Papa_Lazarou]

I haven't found an atty that ticks ALL boxes, but the O-16 is really close. Honestly, the only thing I'd like over the O-16 is something the Hadaly offers: direct airflow at the coil. Because the way I run O-16s is with a center coil. I have no use at all for dual coils. So this means the airflow is aimed diagonally from the sides. Granted, I could run it in true "single coil mode" with a side-mounted single - but, no. So, I like that the Hadaly has direct airflow intended for a single center coil.

Other than that - the O-16 is perfect, IMO, in all ways.

You might actually like a NaRDA (not that I'm enabling, mind). The chamber, while larger diameter, is eaten up some by the air inflow channels. Also, there are some cool ultem caps that reduce the chamber further. The airflow, BTW, has a greater range than the O-16, too.

A single center coil is its speciality.