Fine
the deed is done.
I'd forgotten what it was, but glad you'd gotten. Reading on, I realized it was the hadaly. Glad you at least love the flavor of it, if not the build deck
I dislike super tight top caps. It's a pet peeve, I guess.
Same here. I don't have near the hand issues that Kenna does, but I do have hand issues, so a tight top cap is something I don't like. One reason I loved the Rm8 derringers so much, but didn't like it when the AFC would decide to fly across the room when taking off the top cap. That happened more on a different clone than it did the actual Rm8 though even though it is also a clone.
I have cut a gripper thingy into strips - they are great for this !
Makes it soooo much easier to pull off caps !
I haven't cut any, but keep one on in the cave where I rebuild, and one in the kitchen. Need to get a couple more of them.
Hey guys. Hope everyone is doing good. I have a slight problem, and need some advice. The Magnet came out of my sliding door (white door that goes on Han Solo). I put it back in backwards using a tiny drop of super glue.
How can I get the magnet out of the hole without ruining it? ...Put it in hot water? ...Use a Micro Torch?
welp what I was going to say was covered. I didn't have any luck using a large soldering iron of a friend and a strong magnet to pull it out. I used my crafting glue, Tombo mono multi and man did it stick. Later when I had no access to the solder iron, someone mentioned trying to get the one from the mod off.........wish I'd thought of that in Florida. Still haven't gotten that bugger out, but haven't tried anymore either. Don't wanna ruin the paint. Just figured at some point I'll be able to send my purple mini in for a shave and haircut and new innards, and would send the door at the same time.
I can hardly do cinnamon at all. Apparently, it's one of those flavors I'm sensitive to.
same here!
because that juice in a subohm DL build would prolly melt your uvula.
Sent from my LG-H815 using Tapatalk
I think this is the beach one.......I'm so jealous, except for the fact that it looks way too cold!
i'm thankfully opposite end of the country, but yeah, she's big
Glad all y'all got was some rain. Good to see ya posting more
I'm back!
Update:
Got the cyclone afc was going to send to chowderhead and realized I hated afc top cap. Took about a month but I found the original top cap and I love this thing. Got an extra deck with it too the concave one! Drilled it out myself. I'm actually going to send the other one "2014 flat deck" to Tom for a back up. Now if only I can find the fusion drip tip..
Phew! Sorry I've been gone hope everyone is doing good!
Wb, and glad you found what you like!!
Sweet "murderer's row" of small chamber MTL atties right there
I've got one that came from ratman on a reo mini......can't remember now what it's called. IBA doesn't sound right, but it was something like itty bitty atty. If memory serves, and it rarely does, it was kinda like a hornet. I tried it, but even back then it wasn't for me. But that one is going back awhile.
morning
it is 50 F here
pretty sure that is actually life threatening, like
@Rayonati Sloth gets
jup it is!!
@Doffy
Begging for a girl scout cookie
View attachment 645285
awwwwwwwwwww glad you gave him one! Glad he can handle the chocolate. I didn't even think it was real chocolate, but one time gave our Westie mix a couple teddy grahams with tiny specs of chocolate, and he threw up, and gave the puppy one cookie crisp piece of cereal with some specs. They musta been real chocolate, cuz he got ......... So our dogs get NO chocolate at all.
I felt 70 degrees C once during the heat treatment of our house. I went inside and stayed a few minutes. Not sure what posessed me to do that...
Yipes! My son was in Kuwait for a couple weeks before going to Iraq, and the thermometer there topped out at 140. Then he worked for an insulator and when they were in attics all morning or afternoon, I forget what he said the temp was, but it was even higher than Kuwait I think. You could literally wring sweat out of his shirt.
Hello everyone I'm more of a reader and looker. But I would like to see how some of you do Z-coils. I have four O-16 and use rxw single coils and I have a hard time setting it up. I make a horizontal coil and bend it so one end can stick into the juice. any suggestions of a better way, maybe some pictures or info will help. Thank you for any help.
well welcome! I did my first (only so far) one by watching the vid sloth posted! It was odd to do, but I got it done with a lot of yanking and tugging. I'm sure with practice it will become easier. As others said, as long as the rod or screwdriver or whatever ya build on stays in the coil, you can abuse it some.
I ordered a 2nd earlier and a damned Therion. No idea what possessed me to do the latter, but whatever. It'll be interesting.
kewlios. I'm pretty sure you said a BF one. I think I've heard references to that before, but haven't looked em up. Don't remember if it was the therion or triade, but I fell in love with one I saw at one of the Chinese places that was purple ostrich!
Just blew my first spring, I took the cap off the O-16 and when I put it back on I must have been pressing the button on my P-67. Next time I will use the slide to deactivate the button. Am I the first?
well now you've been initiated. I have yet to have that happen, but am super .... about metering several times and with the top cap on. and finally got a 521 tab, so it will be even easier to meter after it's wicked
have this pulled up to watch later if it's the waynes woodies one.
I am nearing 3 months in a few days since quitting and it just seems to get easier with each passing day!! I played the benefit we were scheduled to play last weekend and found myself in amongst a whole gaggle of smokers and never even flinched at all. I did however make sure I stood a couple feet from anyone that was smoking as to not smell completely like a cigarette when I got home but to no avail, that was just impossible to do.
The girl we did the benefit for passed 3 days prior to it and was dearly missed by everyone that was there. She's in a better place right now and not in any pain anymore.
that's awesome on the 3 months. Jup you can't get anywhere around cigs without smellin like smoke. Sad reason to get together, but glad y'all did. Would love to hear a recording if you're ever able to post one.
I've been looking at a particular other sqonk mod but haven't pulled the trigger as I'm scared of it. No spring. I try and be as careful/deliberate as possible but you never know.
As someone said, the copper vapes are a good cheap entry to BF, but I love knowing that I have that spring if I ever need it! Don't think I'd want one without it.
hehehe if this is the sloth bath.....that was so cute! But dang......bathe em, then git em dirty again. lol
I never understood spending that much money for a device that you never take out of the house. Thats just a waste of money to imo!! The reason I vaped a Reo was because it could take just about any abuse I could see fit to throw at it and still just pick it up and vape it... There have been several people in the past couple years that have dropped Dibi's and other expensive devices on the kitchen, garage, or even some living room floors and it was making an immediate trip to the spa... Not my idea of money well spent!!
for me personally I agree. I'm far more function over form. But for those who can afford it, and like em, go for it. But I'm with you. If I did have that kind of money to spend, there are a lot of other things I'd spend it on. (2 p-67s maybe) and some stamp stuff with the leftovers. lol or 1 p67 and a lot of stamp stuff.
I'm confused I ordered from Indy vapor shop and you have to confirm your old enough by uploading a picture of a government issued ID? Strange to me... anyone confirm on this?
I"ve always heard they are a good place, but I will not order from someone who wants a copy of my license. It's probably not really a big deal, but it just bugs the stuffin outta me and I won't do it.
i didnt realize but this thread had a birthday last month on the 10th
so spill.......who is it? I have Gracie down for the 11th.
I did ! I did !
OHMAGOSH !
FINALLY !!! Only took several years !!
Serious mailman stalking going on here !
Wahooooooo!!! can't wait til you get it!!!!
I go on thursday to have the nerves burned in 3 places between the vertebrae. Hoping this gives some pretty good relief on the right side. They said an avg of 8 months. A friend on another thread says his only lasted 6 weeks. If this works, we'll look at doing the left side. I've had a LOT of rain pain, and been kept busy with the puppy, so haven't been on in awhile. But y'all are always in my thoughts even if I'm not on here.
idk if that's a warning sign to start making sure you have enough parts. I ordered some more spares nonetheless.
